Very nice, something to keep in mind when mine breaks. One mini milling project is to replace that plastic black block with an aluminum version. I noticed mine flexed by about 20thou when pulling up and down, the new aluminum version flexes by only about 1thou. You shortened your so it's probably not as big of an issue.
@1QuadControl
7 жыл бұрын
Hey, I bought a G0759... which is probably what you should have done. I'm quite happy with it. I'm puzzled as to why you didn't just install the DRO on the Z axis, and forget about the quill DRO. I have come to realize that the only way I can get a decent finish is to lock the quill down tight with the Quill Lock Lever, and this would render your quill DRO unusable anyway. My thoughts are that the DRO on the overall Z axis is a much better plan.
@crossslide2593
7 жыл бұрын
The quill DRO gives me very fine and easy adjustment capabilities and then I lock the quill. I also have parts that I drill or mill holes to a specific depth. It's pretty hard to only adjust the Z axis when trying to hit within say .002"
@TheSuburban15
6 жыл бұрын
The igaging Absolute DRO plus is compatible with TouchDRO android software. With TrouchDRO, there is a feature that allows you to add the quill scale reading to the column scale reading for an absolute z-position reading.
@mikeyeyes7
7 жыл бұрын
Hi just purchased a G0704 Do u no what's a Good speed to run a 3/8" end mill to cut 7075 aluminum? And what gear High or Low? Mines still stock in not converting it over. I'm new to cnc machining. Thanks in advance
@crossslide2593
7 жыл бұрын
I use FSWizard for speeds and feeds. There are other calculators out there if you do a search. Welcome to the G0704 club!www.zero-divide.net/?page=fswizard
Пікірлер: 7