Thanks a lot for creating this video. I had a little bit of struggle during the installation until I realized that the retaining lock pin was still depressed. It is necessary to ensure that it gets released once the assembly sits in the final position.
@dk-bw4gk
5 жыл бұрын
Thank you for this. I didn't have this exact problem, it suddenly wouldn't turn with three keys, but that little button on the cylinder allowed me to wrench over the key and break loose whatever piece of shit that was lodged in there. I felt it let go. Now all the keys work easily. Filled the lock with Teflon spray and hoping it won't come back soon.
@aKids_TV
4 жыл бұрын
Worked
@Jfitch24
3 жыл бұрын
So it was stuck in lock and the Allen wrench really got it to turn ? . My wheel stuck and the key stuck on the lock spot I used a Allen wrench maybe I need a nother size
@dk-bw4gk
3 жыл бұрын
@@Jfitch24 I didn't use the allen wrench to turn anything, pressing that button just defeats whatever device stops the cylinder from rotating otherwise. I used considerable force to turn the key with that button pressed in and some piece of grit or something finally let go. It's been a while so I don't remember the details.
@Jfitch24
3 жыл бұрын
@@dk-bw4gk I can't even press the button it's like something blocking that
@dk-bw4gk
3 жыл бұрын
@@Jfitch24 I don't know what to tell you. It should press pretty easily. Maybe tap it with a hammer? Spray some Liquid Wrench in there? I've found these cars are pretty junky like that. Had to fix many things since I first commented here.
@andrewdutton3831
2 жыл бұрын
I'm about to do this same job. Love this guy's easy going, relaxed tone. Also...amazing how much prices range for new ignition key cylinders. I saw prices online and conventional stores anywhere from $150-220. On Amazon, I got an Hyundai OEM key cylinder for $38.99. The range of prices is remarkable.
@edmagalski6779
7 жыл бұрын
Thank you for the instructions. It went as easy in real life as it did in the video. Thanks a million.
@dougbirkett2005
7 жыл бұрын
Welcome, knowledgeable-tips, good well-lit video, clear speech, excellent camera work, esp considering no 3rd hand available. Thank you. Glad I saw it.
@ricardocuevas7815
Жыл бұрын
Amazing video!!! GREAT job Sir! Thank you very much! I was able to fix my fathers car!!
@frankjackson655
2 жыл бұрын
awesome video with clear instructions. thank you so much! you made my install go very smooth!
@tomstokes6166
6 жыл бұрын
Nothing I do ever goes that smooth.
@loloberry5932
3 жыл бұрын
So much easier than expected. Thanks
@TNcountrylife
5 жыл бұрын
A locksmith can rebuild this switch for about the same price, as I do it often. The best option is to repair the switch because if you ever lose your keys making a new key for the non original switch is a lot harder and cost alot more. As you stated you now have to carry 2 key to operate your car. So the smarter choice is to have a locksmith fix it for you..
@mosdiy8096
2 жыл бұрын
Well I would but mine was fuckin stolen 😭
@jimharris8786
3 жыл бұрын
Certainly miss this dude!
@kevinpeters4631
7 жыл бұрын
Before installing take the part to a locksmith with your original key. They will configure the unit to work with your old key for $65.00.
@project4bangers
2 жыл бұрын
For anyone else doing this- my situation involved the cylinder and the little black box on top held on by 2 Phillips head screws was also bad. Both.
@treatnobleman7609
Жыл бұрын
What is the little black box called?
@SailorVic1
2 жыл бұрын
I lubed the heck out of it and persisted. Had to grab the key with pliers (dangerous, I know!) and apply good pressure and it finally let go. Now its smoother than it ever was, I guess cylinder lubrication is good practice?
@spaceboy3101
5 жыл бұрын
Great vid! I'm getting ready to do mine, and was really hoping this would be an easy fix so I can save money. I have a problem where the starter won't always disengage and I have to twist the key a little one way or the other to stop the grinding. It's been getting worse. I only hope I haven't done too much damage to the starter or flywheel by now, but it's been starting fine so far.
@bazar_rawness805
5 жыл бұрын
Sounds like u need the ignition switch replacement which is behind the key ignition switch if that makes any sense
@spaceboy3101
4 жыл бұрын
@@bazar_rawness805 Hmm, I'm just now getting to this. Just bought the cylinder yesterday. I bought it because on another site or video someone who had the same problem fixed it with this, so I hope this is it. YT doesn't notify for most posts anymore so I'm only now seeing your response. I'll post back with what I find out.
@aloiba100
2 жыл бұрын
@@spaceboy3101 did it work
@Andrew-xr7og
5 жыл бұрын
Trying to replace the switch on a 2006 Sonata which, I'm assuming, will be accomplished in much the same way. I'm replacing the switch because I can no longer get it to turn, so if i'm unable to rotate the cylinder to the ACC position, is there another way I can get it out. Other than busting everything else up.
@luisaldaco1885
4 жыл бұрын
Did you figure out how to do it ?
@smbonnell
3 жыл бұрын
Still can be done - Lower the column. Dremmel a slot in the so called antitheft bolts. Use a screwdriver to take out the bolts. Put the switch on a bench and drill out that button lock then assemble as needed with new lock assembly. Good Luck
@bonniej2609
2 жыл бұрын
@@smbonnell - I'll try the Allen wrence & wiggle.. Spray WD40, or Electrical Cleaner...
@patrickwilliams3690
Ай бұрын
Does it have to be in the acc position for it to work
@maddysdaddystevem563
6 жыл бұрын
Dude! You're a genius! Thank you!
@briangray8340
3 жыл бұрын
Do u have to unplug wire on side of ignition?
@bottlenose.dolphin
Жыл бұрын
did you just pull the plastic part? i took all the screw out but it’s not giving and i don’t want to break it 1:00
@jessicalubien5424
4 жыл бұрын
Where did you get the part and did they have it in stock?
@knucklebusterz4450
3 жыл бұрын
Bob ross of the mechanic world
@Michael-bd4zu
3 ай бұрын
The spare key doesn't turn the ignition..main key was broken in 2 pieces..I tried wiggling the key and it doesn't turn ignition...what do I do
@jungletension2835
Жыл бұрын
This will be the fourth time I’ve replaced mine. Or 2008 Hyundai barely get used. Sometimes it will sit for four or five days in the garage.
@robglaze9213
6 жыл бұрын
thank you for youre video it helped alot
@Lhostel
3 жыл бұрын
So what do i do if the key won’t turn?
@shanebaileycreates
Жыл бұрын
Thank you!
@roadstar499
7 жыл бұрын
so do these first screws you removed have plastic covers? We're their just 2? I ended up finding a used ignition on eBay
@RobertYayo
11 ай бұрын
Do i need to program key?
@denisst-cyr3558
5 жыл бұрын
Hello cindermaxfelix Just to thk U for that great vid.. Just completed repair on my 09 sonata...But here is my story . I live in Montreal canada..and here our NF generation Sonatas mfg in Alabama are equipped anti thief device wheras U in USA are not..I bought on EBay my new lock just to find out it came with no chip key ! therefor no match for my canadian Sonata. Therefor I had to rebuild my old lock swapping parts with my new Ebay purchase. Guess US base insurance companies did not put pressure on cars manufacturers to equip US market cars with anti thief device as we have here(CANADA) . Anyhow my Ebay purchase help me rebuild my old lock. BTW purchasing a new lock and chip keys and getting Hyundai to program it would have been a $750(cdn dollars) . U just save me a pile of $$$ ...Denis here...(French canadian ) doing my best to write in english language.
@TNcountrylife
5 жыл бұрын
For future reference ALL kia/hyundai models are non chipped, for the exception of the Kia Amanti and Berago
@nathanryhard4505
Жыл бұрын
@@TNcountrylife Not true in Canada. Denis is correct. The Canadian Hyundais use chip keys whereas many of the American versions of the same models do not. I have a 2010 Hyundai Elantra Touring GLS and it has a center cut key with a chip. All the American replacement parts have external cut keys without transponders for the same model. This makes it particularly confusing for Canadians trying to find the correct replacement parts. My locksmith confirmed that this is a common issue between Canadian market and American market cars, even when from the same manufacturer.
@aliapplez6350
4 жыл бұрын
But does it have to be programmed
@RUDEST99
3 жыл бұрын
Boo I ask the same thing did u figure out
@isaiahfilmedthis9308
3 жыл бұрын
Hello I have an 07 sonata and the steering wheel is locked up and the key will not turn, I’ve attempted to simultaneously turning the wheel and the key so as to unlock it without any luck so I moved to replacing the ignition switch however I cannot get the key in the ON position, you said you can use the Allen wrench to push the spring in and then turn the key to the ON or turn the key to ON and then use the Allen wrench please help!!
@elite-2691
2 жыл бұрын
Did you ever find out the fix?
@Jesus.Eternal
2 жыл бұрын
Cant seem to get the white switch back in... Is there trick?
@jessecook5299
5 жыл бұрын
OK the only difference on my car is my key is stuck in the locked position I can remove the key but when I put it in it will not Turn out of the lock position so I cannot take the housing apart what do I do then
@bazar_rawness805
5 жыл бұрын
Move the steering wheel while u twist the key at the same time
@steveY2K1
Жыл бұрын
if the key is stuck in lock position, will depressing the release spring still release it so it can be replace ??
@jamirpettiford9362
Жыл бұрын
no it doesn’t seem like it. i’m trying that right now! if you found a solution please let me know ASAP
@karonrenee9490
5 жыл бұрын
i cant seem to find a screw and bolt to fit my battery post exactly like yours i having a no start issue and cant find a square screw to fit in the hole please help me
@maurofebrero9337
3 жыл бұрын
you had to program the key with the vehicle's computer??
@latinoheat210
4 жыл бұрын
What if it's in the locked position and can't be move it to acc... position?
@Jfitch24
3 жыл бұрын
I'd like to know that to
@stephaniekiziah1662
3 жыл бұрын
I had to bang on mine (on top of the key) while the key was in it in it, I thought I might break it😬😬, with a little hammer until the tumbler things inside loosened their grip on the key. Then you can turn it.
@bryanuvario1445
3 жыл бұрын
How would I do this if my key won’t turn?
@SailorVic1
2 жыл бұрын
Your solution would have been great, if my cylinder was able to come out of 'lock' and go to ACC. It is jammed up and won't move out of lock. Now what?
@bonniej2609
2 жыл бұрын
Same Problem here- but a Previius Comment said- just pushing the Allenwrebce in allowed it to Move
@bonniej2609
2 жыл бұрын
Im gonna See if wd40 will loosen it up too..
@ashleyd4589
Жыл бұрын
What if you cant pit the car in acc?? Mines stuck on lockkkk😫😫😫🙏🙏
@classicstangbrn8964
9 күн бұрын
But want if you don't have a working key?
@chuckdizzle8775
5 жыл бұрын
What if the ignition is locked and it will not turn into the accessory position. Will I still be able to get it out?
@daniluchison
5 жыл бұрын
I just run into such issue: if you can't turn it to accessory position, REMOVE THE ENTIRE IGNITION ASSEMBLY. Type this on ebay so you can see the entire part.: "2006-2010 HYUNDAI SONATA IGNITION LOCK CYLINDER ASSEMBLY W 2 KEYS USED OEM! Once you remove it, DRILL the ignition cylinder lock (where the keys go) in order to override the accessory option. I'd buy the ignition cylinder lock BEFORE you start in order to have a point of reference. While you are at it, buy the ignition starter (white piece on that goes on the back) so you can replace both, front and back at once. One more thing, the tiny lock that's on the side of the front cylinder lock, you will have to hit it HARD in order to release it from the main body. Good luck!
@bazar_rawness805
5 жыл бұрын
Move the steering wheel while u twist the key at the same time
@RedZoneReacts
Жыл бұрын
you didn’t have to do any computer adjusting for this?
@ashleyd4589
Жыл бұрын
No these keys don't have chips!! No need to reprogram but you do got to go to lock smith to get the ignition set up to your key size
@asah412
Жыл бұрын
But what do you do if key will not turn to accel to get the ignition to pull out?
@TheBMiester
Жыл бұрын
Tap it with something as you are trying to turn and it will turn eventually
@Nordic_E.T.
6 жыл бұрын
Very nice work.
@kameo8321
3 жыл бұрын
Does it need to be programmed?
@bear-cy7gi
Жыл бұрын
That's what a mechanic just told me about the programming
@rydellwanzer1650
7 жыл бұрын
I have a 08 azera and I was told I have to have the key computer programmed if I switch it out do you think I could do the same?
@cindermaxfelix
7 жыл бұрын
www.rockauto.com/en/moreinfo.php?pk=3773574&cc=1441264&jsn=340 www.rockauto.com/en/moreinfo.php?pk=7497936&cc=1441278&jsn=379 There are differences between the two. I believe that Ace Hardware has the equipment to program car keys. With any luck they could transfer the coding from the old key to your new key. I might be a cheaper option than the dealership. Best of luck.
@jazzsounds8159
5 жыл бұрын
@@cindermaxfelix I just broke off my key in the off position, 06 sonata, please help.
@tangldupnblu2
2 жыл бұрын
I depress the spring to turn the key to aux but the key still won't turn.
@leonardmorales746
3 жыл бұрын
When you buy a new one.. does it come with new keys to the ignition?
@thefreedomadvocate6579
3 жыл бұрын
Yes
@sumanrana3025
5 жыл бұрын
Door open with that key ?
@TNcountrylife
5 жыл бұрын
Lol nope..
@bazar_rawness805
5 жыл бұрын
Use Your alarm
@rettaann3098
2 жыл бұрын
What if I lost the keys??
@antelmobeltran9170
7 жыл бұрын
Can you tell me the name of the part that is found inside the housing as shown in minute 2:40?
@lothianmcadam1
6 жыл бұрын
"Body & Switch Assembly-Steering & Ignition""; Hyundai Part No.: 81910-3K010
@garethevans3021
2 жыл бұрын
Excellent
@greenbitch421
3 жыл бұрын
This does no help when you cant even turn the key to accessory. Didnt think of that possibility did ya jimbo
@timjohnun4297
3 жыл бұрын
Then you have a bigger problem and maybe need to actually spend some money and get it fixed. Didn't think of that possibility did ya Cameron
@jeremymariscal9200
7 жыл бұрын
Does anyone have a link to do this to a 2002 Sonata?
@MAXFatan
4 жыл бұрын
شكرا
@briand9764
6 жыл бұрын
So I installed the part after waiting four days, went to start it and it stayed on for about a minute before it started idling funny and ultimately shut off. The battery is maybe a year old. Any suggestions??
@mathieug6858
5 жыл бұрын
a microchip in the key was your probleme??
@briand9764
5 жыл бұрын
No the problem was I disconnected my battery for to long and my cars Ecu reset itself to stock. Overtime your car has to compensate for carbon buildup and it tells the ecu how to do that. Long story short I had to give the car gas while holding the brake to shift into drive, then I drove for 25 miles on mostly straightaways with little stops and my car ecu reprogrammed itself so it knew how to work properly. Hopefully that makes sense.
@manuelguzman8804
6 жыл бұрын
I cant push the pin in on my car?
@anwaralrashidi4110
4 жыл бұрын
I can’t take it out it’s so hard? What i have to do
@anwaralrashidi4110
4 жыл бұрын
I can’t even put the key on Acc position
@josearmenta5097
2 жыл бұрын
What if the key isnt on the acc mine is on lock
@ashleyd4589
Жыл бұрын
Did you figure it out ??? 😢
@slayz1515
Жыл бұрын
Too bad my key won’t move at all to go in to acc
@roadstar499
7 жыл бұрын
$140 is insane price for that part...maybe it can be repaired some how....thanks
@cindermaxfelix
7 жыл бұрын
You got that right.
@roadstar499
7 жыл бұрын
Just got my used one have not installed yet...it turns like yours but key will not come out...just watched your video and my guess is its no good...so much for junk yards selling used parts on ebay...i did spray liquid wrench in key hole...nothing so far...thanks
@roadstar499
7 жыл бұрын
cindermaxfelix now i just spent 40 mins trying every trick on you tube to get key to turn to accessary position. .so I can remove from car..what a peice of junk...thanks
@TNcountrylife
5 жыл бұрын
It can be repaired I do them frequently. Repairing it is a much better option for several reasons
@Devinehands99
7 жыл бұрын
What if your key will not move at all. How do you change this cylinder?
@cindermaxfelix
7 жыл бұрын
Sorry, I don't have an answer for your dilemma.
@dhmack
7 жыл бұрын
I have the same problem. I'm trying to replace it because the key won't turn to the ACC position.
@dhmack
7 жыл бұрын
A locksmith recommended tapping on the key with a screwdriver. That did the trick I was able to turn the key to the ACC position and remove the ignition as shown in the video. Thanks!
@marianluc6235
7 жыл бұрын
Dennis Mack people are not careful to hyndai you have to push the key slightly push in, how do I know because I had to educate my wife in this regard women are good for cooking not for technology
@kaptkc
7 жыл бұрын
My wife used to drive an 18 wheeler with me and now designs websites. Sometimes shit just breaks.
Пікірлер: 120