Confirming Auto-Tune in Drives
1. Introduction
This SOP provides a step-by-step guide to confirm if an Auto-Tune was done between a drive and a motor.
2. Procedure
2.1 Understand Auto-Tune
A successful Auto-Tune will match a drive to a motor, this makes the motor more efficient
2.2 Confirm Auto-Tune
Auto-Tune modifies the E02 parameters
2.3 Check the Modified Parameter Directory
If there’s ever a question if an Auto-Tune was done, go to the menu selection and open up the modified parameter directory. Look for the E02 parameters.
2.4 Review the E02 Parameters
You will see in this particular application that several Auto-Tunes were done and all the E02 have been changed from factory default settings
2.5 Understand the Modified Parameters
Understand that if the parameters are in the modifieds, they are no longer factory default.
3. Conclusion
This SOP provides a basic guide to confirm if an Auto-Tune was performed between a drive and a motor. Always ensure to follow the steps in the manual order to prevent any complications.
Access more CMCO training from our Magnetek team here - motion.cmco.co...
Full Series 5 Troubleshooting Video Playlist - motion.cmco.co...
Негізгі бет IMPULSE® •Series 5 AC Variable Frequency Drives: Auto-Tuning Verification E02 Parameters | CMCO
No video
Пікірлер