hello 🖐.just a little reminder ;)we were mailing yesterday
@washingmachinetipsandhelp4350
Жыл бұрын
Good man. 2 mins
@anidamsa4396
2 ай бұрын
Great video, sound tips from start to finish. My machine is similar ,,, and is getting power, it’s not running through the cycles. And spins at a slow speed. It drains fine too. Should I replace the pcb board that you did in the video or should I do the top front one , there is a guy on eBay selling both the parts that fit my washer. And obviously I don’t want to buy both , any advice greatly appreciated. Many thanks in advance 👋
@washingmachinetipsandhelp4350
2 ай бұрын
Hi. Apologies for only coming back to you. If you just do a spin cycle does the machine go into a full spin? If you are changing the PCB you won’t need to change the front board, only the bottom one. I’d be interested to know if the machine goes to full spin speed on a spin cycle
@dalla15
Жыл бұрын
Hi i watched a video of a zanussi washmachine on how to reset it i did the reset part and as soon as 1 turned the button it gave me te C menu turn thw button again and it said E6H but cant find anything about it do you know a solution or what is broke? Also cant open the door anymore...
@washingmachinetipsandhelp4350
Жыл бұрын
Hi Dalla, is your Machine a Zanussi?
@dalla15
Жыл бұрын
@@washingmachinetipsandhelp4350 yeah its an zanussi thanks for the fast reply!!
@washingmachinetipsandhelp4350
Жыл бұрын
@@dalla15 No problem. All the info I am getting is that it is a heating element issue. Could you try doing just a rinse cycle and see does that complete and the door unlock
@semi-sane5149
10 ай бұрын
Very good; what was the Cost of the "Board" & where to buy from 🤗🤔
@washingmachinetipsandhelp4350
10 ай бұрын
Hi. I took the PCB from a Machine of the same make and Model that had bearing issues. You may have luck on eBay 👍 If buying direct from Indesit be mindful that the PCB is not programmed. If you have no luck with either you can let me know the model number and I can check if I have one. 👍
@clarkwilson4425
Ай бұрын
I have the same machine and it is stuck in a spin and drain cycle. It doesn't spin at full speed. Would i need to change the pcb? My missus is giving me a hard time so any help appreciated 😂
@washingmachinetipsandhelp4350
Ай бұрын
Got to keep the ladies happy 😆- if you. Put the machine on just a spin cycle (with a load of clothes) does the machine reach full speed?
@clarkwilson4425
Ай бұрын
No.doesnt reach full speed but fills with water,then spins but not at full speed and just keeps doing the same again. An endless cycle
@clarkwilson4425
Ай бұрын
So it's not a bearing issue and it definitely drains somewhat
@washingmachinetipsandhelp4350
Ай бұрын
@@clarkwilson4425 it shouldn’t be taking water at all on a spin cycle. I would suspect it is a PCB issue. If you are ordering a PCB make sure it looks the exact same as the one you have. By the way is your machine an Innex model?
Пікірлер: 26