It’s nice to see that you all are friends with RAN sailing ... they are a nice couple as well !!!
@jimczerwinski4951
5 жыл бұрын
Nice to see you together with RAN. Been following them for awhile too. Lovely pair.
@sailingstraight6399
5 жыл бұрын
I love watching your progress. Can't wait for you to finish. LOL
@Stupha_Kinpendous
3 жыл бұрын
I got started on your channel much later in your timeline, and now I'm going back and watching some of the older videos. Jesus. I had no idea your boat wasn't brand-new. Watching all the work you put into it is absolutely wonderful.
@MonkPetite
5 жыл бұрын
Cool you visited Sailing Ran.. :-).. see here how small the sailing world is. Well done ..
@glenpeters955
5 жыл бұрын
Absolutely perfect kootchie kootchie koo moment missed at 6:10, Emma I am disappointed in you.... Haul out cannot be far away now Teal.
@anjongaustrejr3633
5 жыл бұрын
nice and clean job again guys......
@webheadusa9377
5 жыл бұрын
Re: Onboard Lifestyle ep.40 Linh's 7 Day Challenge! When you installed the cockpit outlet, a green grounding wire was connected to the outlet at the box. My questions are; 1. how do you ground electrical work on a boat? 2. how do you protect your electrical systems and appliances from a lightning strike hitting your mast (the mast could be aluminum or composite materials, but some rigging components are steel) or some other metal object on or about your deck? 3. When you refit, your salon table for example, do you prepare as-built drawings and material lists? You must recognize your work will be seen by cruisers, and when they see you at anchorage or at a dock, they will ask you to build something for them, or repair something on their boat. You will be in demand. Have you planned (including how to say no) for such requests? Teal, your work is not basik! Well done!
@squigles_uk
5 жыл бұрын
Aaaaaaaaah the weekly fix of ‘special colonial cousins’. Won’t be too much longer and the weekly will become an A’s and when! Coming along nicely 👌
@jimjenkins673
5 жыл бұрын
The two best channels on KZitem connect! Fantastic! ,,,,,,,,,,,/),,,,,,,,,,,,fair winds.
@26snoopy82
5 жыл бұрын
It’s getting closer! It’s getting exciting
@whyme8068
5 жыл бұрын
Emma's selfie hug was priceless! With all the things Teal does, it's a little skin that freaks him out? 🤣🤣🤣
@linhgobenyt
5 жыл бұрын
It's his kryptonite! 🤣🤣🤣🤫🤫
@ernestdougherty3162
5 жыл бұрын
Yeah buddy two of our favor sailng Channel KZitemrs do a meet-up that's great looks like y'all had a great time great job on the rudders that has to feel so good knowing that that job is done just to finish up hooking everything up be safe
@Stikker021
5 жыл бұрын
Linh, you are so sneaky, I bet you set that one up. Now Teal is gonna have to cut that finger off. We all know that chicken skin does not wash off as cheese does. 😁
@linhgobenyt
5 жыл бұрын
Lol, did I set Teal up? 🤔🤔🙄🙄 I have way more tricks up my sleeve and still need to pay him back for that shower scene. He needs to learn not to mess with the master of pranks. 😜😜
@pdc451
Жыл бұрын
Teal, wow dude you love drilling holes in your boat 🤣
@andrewnims8175
5 жыл бұрын
Great job with the rudders.
@onthebeaches
5 жыл бұрын
Good job grasshopper!
@HopeOfJoe
5 жыл бұрын
You guys are just sooooooooo much fun !! Happy you were able to connect with Johan and Malin. I had mentioned to them when they said they were in the Lake, that you were there and should connect. Don't know if it was my suggestion as it doesn't matter. Happy you 5 connected. Love you guys !! 😀. 👍👍
@katehostetter3628
5 жыл бұрын
So glad you added the chicken skin video again. So very funny!
@btolan96
5 жыл бұрын
Huge fan of your work, I haven't seen this kind of quality and skill in a boat refit. Something that would make great content, when you haul out, is a full inspection of the boat. I just want to see if the inspector could find something wrong. My guess is that you are sitting on over 1.5 million in equity, would be fun if you could find out an approximation on the market value of your boat.
@JCAJCA3
5 жыл бұрын
Anytime you have OBL & Ran together on one video its a hit! Looking forward to seeing that wheel working next week. Great job guys. Another wonderful video. GOD bless you guys. JC
@Thomas_Speck
5 жыл бұрын
"I think its Square" ... ... "Ooo - is it Skin, tell me it wasnt skin" ... you made my Day! Thanks!
@tomd.3082
5 жыл бұрын
How cool that you met up with Ran Sailing (Malin and Johan). They were the first channel I subscribed to. Good job getting the rudders back in. All that hard work paid off with a quick and easy reassembly. Looking forward to next week's episode.
@robertgilljr2202
5 жыл бұрын
Hey Teal. Just a thought, you could make a rubber disk that will fit in the hole on the sugar scoop that the ram shaft sticks through. The disk should be a flexible rubber with an x cut in it, to let the ram out and keep most of a water splash.
@JoaquimHenriques_1
5 жыл бұрын
Nice...Two great couples together! Once again another great pro video
@fxpthl
5 жыл бұрын
Anxious to see how the wheel we sit in relation with how the helmsman will be positioned when steering. Assuming there will be a captains chair of some kind at the wheel. Still amazed at your attention to details! Your girls are a really big help with most of ,these projects. Compass not so much. He is there for the “Cute” factor.
@brianjoyce9040
5 жыл бұрын
I recall mentioning the wheel, then feeling guilty for adding immediacy when it wasn’t needed. But now, it ‘wheel’ be done. Fantastic crew!
@jwright650
5 жыл бұрын
Ran sailing is one of my favorites. Those guys have a positive, cheery channel like yours. Glad that you guys were able to meet up and fellowship.
@greg5176
5 жыл бұрын
The rudders and linkage all look great, excellent job as usual Teal!
@johnshoureas1629
5 жыл бұрын
Two of my favorite you tube channels meet up. Also, great job on the rudders guys.
@finstrand
5 жыл бұрын
My sentiments exactly!
@SAILS149
5 жыл бұрын
both like their boats just right. its so nice to watch!
@markcampbell3311
5 жыл бұрын
Teal is a perfectionist...I love it! You have to appreciate his attention to detail!! The boat looks amazing because of it!!!
@HellTriX
5 жыл бұрын
Yay! Ran Sailing. I watch them too! I just loveit when youtubers hang out with each other.
@MidnightVisions
5 жыл бұрын
I was hoping Basik and Ran would get together. Cheers.
@martynjones8560
5 жыл бұрын
The girls have found Teal's kryptonite! I look forward to more dermatophobic pranks!
@Re5ist_ance
5 жыл бұрын
Yaaa .. Ran Sailing .. love those guys :)
@dragonblee1
5 жыл бұрын
I admire your approach to engineering, very calm and well thought out. With the help of an intelligent woman you have it made, good luck from Australia..
@amarieshearer7613
5 жыл бұрын
Glad the rudders are on and working! We also follow Ran Sailing!
@kmurray96
5 жыл бұрын
Two of my favorite sailing VLOGS getting together. Great. I like the closeness of this sailing community. They get with Sailing Zatara, that would be a good get together, too.
@andersjakobsen9906
5 жыл бұрын
Love the touch of ocd 😉 And of course RAN. You know you’re watching KZitem, when a Norwegian liking a Swede 😁 Happy Easter 🐣 Glad Påsk 🐣 ,,,,,,,/),,,,,,
@rustycomer8502
5 жыл бұрын
Hey guys! The boat is looking great and I’m really enjoying the diy aspect of your Vlog! Thanks for sharing your expertise and know-how with us!
@rjohn7100
5 жыл бұрын
Only place I click 'like' before watching the video. You guys are great.
@MalloyUnfiltered
5 жыл бұрын
The wheel will be in :) Yeh, Ran Sailing!
@RohanTheBT
5 жыл бұрын
Great to see you met up with Ran Sailing
@jackpatteeuw9244
5 жыл бұрын
I can't wait to see the wheel turning the pump and the rudders moving !
@cgregory332
5 жыл бұрын
I live in Redmond and look for your boat from the freeway everytime I go through Seattle. I love your videos and I also went down to meet Johan and Malin while they were at CSR Marine. They were two of the nicest people and I thoroughly enjoyed meeting and talking to them for a short time. I even filmed them leaving the locks. You keep up the good work. Maybe one day I'll get to meet you guys too!
@bizim_eller
5 жыл бұрын
two of my favourite sailing channels :)coming together
@QvidTvm
5 жыл бұрын
Wow I've been feeling a sense of identity between the two channels, so it's amazing.
@corradomusicstands639
5 жыл бұрын
Well thought out skilled, practical, composite craftsmanship .....and video production. Tip: starboard edge can be simply finished to factory smooth glossy edge by simply dragging a straight blade across the edge........(much like using a scraper on figured wood - Do it before you router round over, or bevel your edges) Best Chris
@OnboardLifestyle
5 жыл бұрын
Thanks for the tip!
@corradomusicstands639
5 жыл бұрын
Your Welcome - takes very little time at all to do - for the perfect fabricated part - satisfaction guaranteed......
@backthebadge4009
5 жыл бұрын
Good job......great that you meet up with Ran Sailing crew.
@VERTICALWisdom
5 жыл бұрын
Awesome video - amazing "family teamwork" - impressive.
@patrickjrpahl
5 жыл бұрын
Haopy to see you guys with ran sailing👍👍👍
@Thomas..Anderson
5 жыл бұрын
I really like your meticulous attention to details and methodical approach. I find your reasoning behind you decisions very informative. It was interesting to watch you implement hydraulic steering. If I understand correctly this is strictly passive hydraulics, no pressure input form engine connected pump. What I fail to understand is why you choose to mount fill in plug on the roof. You drilled a second access hole in the kitchen above the Capilano pump. Why not mount a bracket in there and a fill in plug. No need to drill into the roof. Did I miss something?
@OnboardLifestyle
5 жыл бұрын
The fill location will be located within the enclosure that will be going in next year.
@moejaime2654
5 жыл бұрын
Emma is so tall I think she needs a bigger cabin !! Great video guys keep on keeping on !!
@tenzinwangyal6395
5 жыл бұрын
I follow both SV & Ran. Awesome
@bobstienke178
5 жыл бұрын
Wow! That rudder install looked fantastic!
@englishrose1122
5 жыл бұрын
Great I watch both of you always, Teal will be so helpful with everything technological I’m sure. Love this Swedish couple, such sweet people. Xx
@BaronWeber1
5 жыл бұрын
Great progress and another wonderful video, thank you.
@ruperthartop7202
5 жыл бұрын
Great team work. Really coming together now. Thanks for sharing
@amarieshearer7613
5 жыл бұрын
I also like the easy access from gallie, well hidden!
@TonyK3130
5 жыл бұрын
Love your family videos. A wireless intercom might come in handy as you close up holes to the outside and during docking / anchoring.
@chrismcgann8448
5 жыл бұрын
I can't believe Teal is going to mount poor little Compass on that wall!!! Likeing the blue Rainbow.
@arthurfleck1554
3 жыл бұрын
Yeah, someone should call ASPCA!
@gregpowell1962
5 жыл бұрын
Are you related to the guy from myth busters? Good job on the cylinder. .
@monty81567
5 жыл бұрын
lol,you came on,just as I went outside to shovel another snow storm here in South Dakota.Last time i wrote in,we were getting a snow storm,about 3 weeks ago.It rain 1st,turning to freezing sleet.Nothing like driving to work Wed morning,freezing sleet,mix in with Thunder and Lighting.What more can anyone ask for,roaming buffalo invade my town,lol.
@chrisweber5041
2 жыл бұрын
Parallel “ 😂 nice touch
@arthurpryor773
5 жыл бұрын
Two of my favorite youtube channels, RAN and you. And Teal has a phobia with chicken skin, how predictable.....thanks for a great video, with love from texas....
@alwayslearningthankyou2708
5 жыл бұрын
My Friday surprise treat! Another great video. Thank you!
@DollarTreeFlyer
5 жыл бұрын
Love the attention to detail. I can only hope to build to that standard on my boat
@caglenn1
5 жыл бұрын
Hi Teal! I’m curious if you are going to install some sort of bellows for where the linkages and actuator shaft pass through the sugar scoops to keep sea water out of the compartments. If not, are you going to install bilge pumps to keep compartments dry? Keep up the great work! You guys are almost done! Charles
@OnboardLifestyle
5 жыл бұрын
Before I commit to bellows I would like to see how they perform. I made them to handle a following sea containing any blue water to just the compartments and built them to be self-draining with a 1" pitch for every 12".
@edrosenberger6947
5 жыл бұрын
I guess Teal already aligned the rudders parallel to each other. That must be a piston pump to keep internal oil leakage to a minimum. Even then, the helm wheel probably cannot have a neutral marker.....but it is a very simple rudder control system. I like. Will the cylinder rod hole in the hull be sealed with a rod clearance tube? Like you three, Johan & Malin are good people.....
@trumpetmano
5 жыл бұрын
....'Like Buttah'....
@tomyoksas9299
5 жыл бұрын
Progress! It must feel great 😀. 👍👍 Cheers
@lancer2204
5 жыл бұрын
Almost there!
@trumpetmano
5 жыл бұрын
Yeah ! Get some mileage out of that Chicken Skin video...LOL
@arnteriksen5773
5 жыл бұрын
As always nice job. Dont you ever get angry? With all theese projects, it goes not always as you want, but you never say that word.... In Sweden its also spring and some days ago I get my little motoryacht in the water. So now we wat for warmer weather.
@linhgobenyt
5 жыл бұрын
There are moments of frustration, but nothing worth getting angry about. When you're frustrated, you can think through your problem and find a solution. You can't do that with anger. 😉
@stevesheliflying
5 жыл бұрын
Great video as always. I question why the fill hole needed to be on deck and not just above the wheel where there is less chance for water intrusion? But I trust you know best as I am not there with you. Everything sure looks great!!
@jamesbennett5421
5 жыл бұрын
Nice video, as always. Making progress!
@R.E.HILL_
5 жыл бұрын
Nice.. Any backup hydraulic parts, pump ram for the longer passages in the plans?
@markmateljan260
5 жыл бұрын
Another enjoyable step forward.... great job again. Still amazed with your methodical approach. ♠
@peterhancox5268
5 жыл бұрын
Teal. I'm sure you have thought about this but its worth asking anyway. If your rudders do hit something then the rudder cassettes are going to swivel upwards and rip those 'through bolts' out of your hull. Is the compartment around this area water tight? and do you have a way to pump the compartment if shit happens?
@jumpleadsx2
5 жыл бұрын
Is Teal OCD much? Very methodical and precision oriented. Much to admire. But hopefully not chronic? Do you ever have to go back to the boat when you just get in the car - to check things?
@linhgobenyt
5 жыл бұрын
I would have to say Teal has OCD tendencies, but he is not OCD. There may have been a time or two where he went back to double check the water...😉👍🏻
@philscott7949
4 жыл бұрын
It looks like the ends of the linkage bars will be replaced in the future...?
@e.marinelimited6515
2 жыл бұрын
Is there an update video Teal with the rudders kicking up?
@johntripp2028
5 жыл бұрын
I do not like starboard for spacers or backing. It is too soft and will create give. Once you have give the bolts will loosen and everything starts to move. I have tried using starboard like that and it was a bust each time. You will have a lot of stress for a long time. A lot of cycles. Of course I may be wrong. It happened once. :) BTW You do good work.
@gretheok
5 жыл бұрын
Linh, is there anything you Can,t do? lots of work on that boat,
@Bill23799
4 жыл бұрын
Hey Teal of the past. Just a small suggestion........replace that hydraulic steering ram.
@acbnow
5 жыл бұрын
I think you will run into trouble, mounting the hydraulic cylinder in this way because of the non linear movement of the linkage. The ball mount of the cylinder can only handle the angle of ONE rudder. The cylinder must not mounted between the linkage.
@richardscudds4753
5 жыл бұрын
Just a question Teal , when you put those struts in , what is going to stop the water when it catches up to the back of your boat from flooding the sugar scoop ????
@OnboardLifestyle
5 жыл бұрын
I designed and built those compartments to handle blue water. They are watertight and isolated from the sugar scoops with a steep pitch to self drain quickly.
@rogergoulder3821
5 жыл бұрын
Admirable as always. Where you fit retaining pins in the linkage, should they not have an appropriate washer as well ?
@totoro8532
Жыл бұрын
Awesome video. What WAS that gooey thing at the end of video??? Yuck!
@OnboardLifestyle
Жыл бұрын
That was a slippery piece of raw chicken skin that Linh put in the galley sink. I almost lost my lunch...so gross!
@essenceyachting4925
2 жыл бұрын
Hi Teal, what kind of material are you using for back plates? Thanks, love your videos!!
@khadijagwen
5 жыл бұрын
So RAN has left Seattle?
@markst95
5 жыл бұрын
Teal where did you get the hole saw for the deck plates? Can't seem to find a 6 1/2" one.
@OnboardLifestyle
5 жыл бұрын
Hi Mark, you can buy it on amazon. We have been curating a storefront letting you guys know what we have been using on basik. Here's the link. www.amazon.com/shop/onboardlifestyle Hope that helps!
@robertgilljr2202
5 жыл бұрын
PS. That hydraulic fill tube fitting you put on top of the salon may not be the best location. Due to being exposed to the salt water. You easily could make a bracket to attach the fill tube inside the steering column. And then install those screw hole hatches to make a better closure into the kitchen not a clock plate. Please don’t rush just because you’re getting close to the end.
@OnboardLifestyle
5 жыл бұрын
The fill location will be located within the enclosure that will be going in next year.
@MrKeithrichardbritt
5 жыл бұрын
Teal, I was curious if you are going to have a redundant steering scenario in case something fails while at sea? From conversation I think most agree the steering is most crucial for needing a back up, do you agree? BTW love the channel. Thanks!
@OnboardLifestyle
5 жыл бұрын
That is one of the advantages of having a tie bar connecting the two rudders rather than independent cylinders for each. I have a sleeve running through the tie bar with an eye bolt on the centerline. I installed a U-bolt on either side (about 8' from the center) and can easily deploy a block and tackle on each side to control the rudders manually.
@MrKeithrichardbritt
5 жыл бұрын
@@OnboardLifestyle Cool, from watching all your videos I respect your knowledge. I like the details and learn a lot from the channel. Cant wait for the new episodes every Friday!
@___Chris___
4 жыл бұрын
0:24 how much bridgedeck clearance does your boat have and are you happy with it? Btw: great videos. I love the technical side of boats.
@OnboardLifestyle
4 жыл бұрын
If you watch episode 36, we cover that topic. So far, we are very happy with our clearance. She handles beautifully on the water. Thanks for watching and following!
@Andrew-lk5ov
5 жыл бұрын
I am curious why you chose not to use anti-compression bushings and backing plates to spread the load when you mounted the bushings for the jackshafts for the rudders and other thru bolt applications. Nida-core may serve quite well as a coring material, but I would worry about its susceptibility to localized compression loading, especially when subjected to continuous multidimensional stresses found in steering gear. With off shore cruising, your rudders and linkage will never be unloaded and will be continuously subjected to shock loads.
@OnboardLifestyle
5 жыл бұрын
You are spot on Robert. When I made the video I put very light hardware in to make sure everything was in the correct location just in case I had to move it slightly for alignment. I wanted to finish the hydraulics and test the motion first before putting the permanent hardware in. I have increased the through bolt size and doubled the quantity along with 6" backer plates for the jackshaft bushings. I will cover that in a future video.
@beozzie690
5 жыл бұрын
Wasn’t there some designers and engineers who put that sailboat together with the proper specifications to where the ram goes. So it’s pretty basic if you follow the original design specifications
@OnboardLifestyle
5 жыл бұрын
The answer to that is complicated. Our boat has been modified multiple times over her 26 year life moving the steering system and rudders to accommodate three totally different propulsion systems. When we purchased her the cylinder was located out in the elements and mounted at an angle that put a slight bow in the tie bar. The modifications that we have made to the steering system makes maintenance more accessible and should prolong the life of the components.
@beozzie690
5 жыл бұрын
Onboard Lifestyle doesn’t matter how many times it’s been changed there’s still the same geometry involved when it comes to that. But charge on
@joezang9374
2 жыл бұрын
How did you determine the angle of the tiller so when you turn the rudder on the inside turned tighter?
@gregoryh4601
5 жыл бұрын
Hello Teal A question on your hydraulic ram will you be using TWO? I think Two would be better then one ? the one Rudder System would have more stress on it in turning. But two hydraulic ram could be better and may turn better. I'm just asking because you are going to have long rod going across the boat to the other Rudder. Just my thinking, But it is cool how you have a great Wife that works with you on your Dream Sailboat. Do you know how many men would die for that? Also a great little help she will be a great Capt. Some Day. GOD BLESS and take care.
@jacktaylor1030
5 жыл бұрын
Hello Basik Crew, A day that I've been waiting for, for years. I'm waiting to see how you set up the Hydraulics for operating the Rudders. I'm very interested in the Control Loading System you will use to make sure the Rudders correspond correctly to the steering input commands. How many more big projects like this need to be completed before you shove away from the dock? You're getting close to setting sails, summers coming, and it's time to hit the High Seas. Love Y'all
Пікірлер: 135