I installed this kit about a month before you put up this video. They’re amazing, especially the fog lights. One issue, the harness they provide to connect up to the turn signals are known to have the pins back out of the plastic clips causing a loss of connection for the running/turn signal lights. I got mine all installed and took the bike out, checked when I got home and both the running lights were out. I called Bigbikeparts and their tech was very quick to tell me they have never encountered issues with the lights themselves but several people have had issues with the pins backing out of the connectors. Although I didn’t like having to drop the lower cowl again I was pleased to see that this was my issue. I clipped their connectors and just hardwired them. They work great! They really light up the road in front the bike at night and look beautiful.
@afgcop
4 жыл бұрын
th3r3ds0x how did you hard wire ? I have a blue, blue white, and green cable from oem, and a red black and blue from the fog light kit. Any help would be great. My problem is the connectors they provided do not match my f6b deluxe.
@ShowChrome
4 жыл бұрын
@@afgcop Hello! On the F6B, the connectors do not match as you know. It's stated in step 31 of the instructions that you will need to cut the connectors and hard wire these together. Give me a call at 715-234-3336 if you need further help! -Travis
@sandybryson1211
4 жыл бұрын
@th3r3ds0x I found the SAME ISSUE with Less than Quality Connectors. Such a Shame, Really Nice Lights with Poor Connectors, I purchased the Lights in Dec. 2019 so Obviously BigBikeParts has failed to Correct a Known Issue. I too will Cut the harness and Hard Wire it myself also.
@afgcop
4 жыл бұрын
BigBikeParts hey Travis thank you very much for getting back to me and even leaving your phone number. It is much appreciated. I ended up figuring it out. I realized the directions did say that, only it didn’t say which wire to match up since the color code was different. I actually got it on the first try and it was a wrap, I soldered them and wrapped them tightly with shrink wraps. It was a little extra work but it’s worth it. They’ve made a heck of a difference in not only visibility for me, but visibility as in I’m way more visible to others also. I love it. Thanks for your help.
@ShowChrome
4 жыл бұрын
@@afgcop My pleasure! Happy to hear they're doing well for you!
@sierrafoxtrotgolf3638
6 жыл бұрын
Probably the best installation video I've ever seen regardless of topic! Great job!
@bobathanasidy2741
4 жыл бұрын
Thank you Cruiseman. After watching this Tridium and your Pathfinder fog light installation videos, I gave it a try on my F6B. No matter how complete, instruction sheets can never replace the peace of mind from watching someone with confidence and experience lead you through a task. My Tridium fog lights look and perform exactly as I had hoped and installation went without a hitch. I left the relay dongle up under the glovebox for easy access to swap the bypass if desired. I am continuing my education through similar videos and expect to eliminate any trepidation for future work on this machine. Thanks again
@troyboynton970
5 жыл бұрын
2014 Honda Valkyrie owners. Our bikes have low voltage going LED turn signals, Unlike the F6B. Yes, the show chromes will work. but if you want full functioning of the DRL and Signals you have to spend $50 more for an Admore valkyrie adapter. Same deal with Pathfinder lights also. The directions that come with the adapter are for the Pathfinder So cal lights which are wired differently. I ran 6 -22 gauge wires from the seat to the front of the bike three wires for each fog. The blue wires are for the DRL and should run to 12v switch power. The red wires are for each turn signal I think red to Yellow is the right side as I remember and the black is your ground. The pigtail harness wires in the kit will not work with the Valkyrie. They are for the F6b and wing installation I suggest buying a 6 pin connector for under the seat and two three pins for each fog so they can be disconnected if needed to replace. I also used a loomed harness. I ran mechanics wire under the tank and found a path to the front fogs without having to take anything off the bike. Go slow use your head not a bad job. It took me a while to get it the way I wanted it so I'm passing this along. Enjoy!
@cruisemansgarage
5 жыл бұрын
Good point.
@boris1779
3 жыл бұрын
Understand everything about turn signal, can you please point location of 12V switch power for DRL .
@RealRyanFlynn
Ай бұрын
@@boris1779 it's under the seat. If you get the Admore Valkyrie adapter, A-GL18RFL, the instructions point to the main harness under the seat. This is the best location to fit this adapter anyway, as there's more room to work.
@andyd1006
Жыл бұрын
I just installed this kit. The video was amazing and made the installation very easy.
@mml1224
3 жыл бұрын
ya know i gotta say, the cruiseman's video was very detailed and informative, good edit shots..kudos2him. i heard u have to pay from most of his vids last time, and with all the free content on utube on this i said why? but if u got the loot, i dont think its a bad investment, he gets in real deep on this!
@pdruryiii
2 жыл бұрын
Do yourself a favor and just take the black plastic off from under the fork area. You can easily fish wires after that and then have all the access to zip tie the wires away from the radiator and hoses. If you try to fish it like in the video, for one it will take forever and two the wires will more than likely end up laying against the radiator and melting.
@russellhorn6372
6 жыл бұрын
I put those fog lights on my 2015 Valkyrie. I didn't have the benefit of your video, and it wasn't easy. I still haven't hooked up the turn signals .
@brandonwestphal6886
6 жыл бұрын
Hello Russell. The 2015 Honda Valkyrie lacks the sufficient turn signal power to trip the relays on the Tridium Lights. I work at Big Bike Parts and can help you with the remainder of your install. Please call me at 1-800-826-2411 ext 18.
@troyboynton970
6 жыл бұрын
Brandon, I have the same problem here. Im starting to think the directional connectors are different on the 2014 and up Valkyrie. I cannot find a connector on my Valk that will accept the directional harnesses supplied in the kit. I
@bubblehead7680
4 жыл бұрын
I gotta say, I sure don't miss that music
@doot9099
Жыл бұрын
my running lights aren't working, everything else is but the running lights just aren't there any ideas on what it could be
@chrishelms1967
5 жыл бұрын
Fantastic
@turkalii
2 жыл бұрын
My 2017 goldwing has two pin connector in the mirror house but show chrome Light cable has three pin connector. What should l do?
@adrespostbus201
6 ай бұрын
Pathfinder or Tridium Light of is there something better today?
@buckeyeone2000
2 жыл бұрын
My turn signal and running lights work fine but one of the fog lights went out shortly after I got them. I took the back cover off and there is a lot in there. Any instructions or tips on how to replace the LED? Replacement Bulb size? Thanks for the great videos
@kennethchristmas6390
5 жыл бұрын
Attempted to install on my 2016 F6B and not able to locate wire attachment for fog lights under radio panel. He says repeat on other side. Incorrect! There is a metal box/panel on right side under panel where button for heated grips which makes it's impossible to locate wire to connect fog light. Have to take bike to shop.
@HerreraCam
2 жыл бұрын
Yudaman!
@313GHETTOFABULOUS
6 жыл бұрын
Great Video. Which ligkt kit has the best light output between this Tridium kit or the Pathfinder kit? Somehow I missed you at WD 40. Thanks for all the great vids.
@cruisemansgarage
6 жыл бұрын
They are both very capable and comparable as far as output goes. The DRLs on the Tridium are brighter than the Pathfinder.
@leelebarron4948
5 жыл бұрын
I installed this kit six months ago. Everything worked fine, until the other day after I jumped my rear trunk lights to have two running lights. Now the signal/running lights on both tridiums blink once when I hit either brake. I disconnected my jumpers and set back to factory but it is still happening. Anyone else have this issue or know what is wrong? Thx!
@boris1779
3 жыл бұрын
I got everything on my 2014 Valkyrie and lower cowl doesn't fit on fog lights holes . Looks like both lights are too far off each other, or facing out ! Use 4mm long spacer on right and two 16mm and 20mm left. Please any help how to correct fit . P.S. bought fog lights work great. I think to buy adapter for day lights (turn signals).
@boris1779
3 жыл бұрын
Use 4mm spacer on right fog light top bolt and will work.
@rjswitzer97
Жыл бұрын
I just installed these on my 2013 Goldwing. Everything seems to be working except the lower cowl like was side. I’m thinking of doing the same on the right also doing the similar to the left. 20mm on top and 16mm on the side. I’ll let you all know how it works out.
@rjswitzer97
Жыл бұрын
Right now I’m about a half inch from fitting perfect.
@rjswitzer97
Жыл бұрын
Ok what I ended up doing to get the cowl to line up with the fog lights was moving the 4mm spacers to the top bolt on the right side. On the left side I to put the 16mm spacer to the side bolt and put the 20mm on the top bolt. In doing so the cowl was able to line up with the lights. Good luck and thanks for your input.
@harvindercheema2628
6 жыл бұрын
I just installed 52-916 fog lights for my 2014 honda valkyrie but information on how to connect day running or trun signals?????? There's no information .
@bigbikeparts3753
5 жыл бұрын
Give us a call we can help you with the process.
@alexkotlyar4463
5 жыл бұрын
nice
@TonVerkleijT3
3 жыл бұрын
What is the music at the end?
@dlos1987
Жыл бұрын
If you have Socalmotogear's Sequential Turn Signals, This kit will not fully work. The turn signals will not work. I repeat, the turn signals will not work.
@davestahl9586
6 жыл бұрын
have them on my 2016, when you turn on the right blinker the whole right side goes out ,0nly had them for 5 months
@cruisemansgarage
6 жыл бұрын
Have you contacted Show Chrome? That sounds like some sort of ground wire issue. Or, perhaps a bad connector?
@davestahl9586
6 жыл бұрын
thanks ill give them a call
@brandonwestphal6886
6 жыл бұрын
Please call me at 1-800-826-2411 ext 18. I work at Big Bike Parts and can assist you. Thank you.
@th3r3ds0x
6 жыл бұрын
Check the connectors, mine had pins backing out on both sides after my first trip out. The running lights were out and the turn signals barely wanted to light (very weak connection) I clipped the wires and just soldered and heatshrinked the leads on both sides so I wouldn’t have the issue again. Great lights.
@DavidVerch
6 жыл бұрын
I have this same issue
@slamgybe1
6 жыл бұрын
What, if any, are the changes to install on a 14 F6B?
@criqdekuyper9259
6 жыл бұрын
The turn signal/running lights need to be spliced into existing wiring for F6B
@slamgybe1
6 жыл бұрын
Criq deKuyper thanks for the reply
@kennethchristmas6390
4 жыл бұрын
Do not fit 2016 F6B! Plug insert inside side view mirrors are small and fog light plugs are med/lg and don't fit.
@daisyduke8139
5 жыл бұрын
Everything great except snaking that tie down!!!!!
@harvindercheema2628
6 жыл бұрын
Do not buy it they say it fits 2014 and never honda valkyrie it's not I bought these lights but nothing just waste of time and money don't buy for 2014 or 2015 valkyrie it doesn't work.
@bigbikeparts3753
5 жыл бұрын
Our tridium lights aren't designed for the Valkrie's only the F6B and the Goldwings.
@jhoneuryfeliz2464
4 жыл бұрын
@@bigbikeparts3753 so I can or I can not use it on the 2014 Valkyrie? Some of you said yes give us a call to help you with... And here is a definitely not. So the Admore adapter or the 6 wires will work or not?
@ShowChrome
4 жыл бұрын
@@jhoneuryfeliz2464 Good morning! While this kit isn't designed for the Valkyrie, this WILL work on the Valkyrie, however, you need to purchase a Valkyrie Adapter from Admore Lighting.
@ghost9119
3 жыл бұрын
I bought my used bike already installed on it. But one running fog not working. The Circle light. is it changeable??
@ghost9119
3 жыл бұрын
These fogs get faulty so often. Mine is not working except daylight , and it conflicts with pathfinder turn signals. Both switchback and sequential.
@ghost9119
3 жыл бұрын
I noticed my fog lights are off randomly once left and right. Is it connection issues ?
@cruisemansgarage
3 жыл бұрын
Sounds like it.
@ghost9119
3 жыл бұрын
@@cruisemansgarage isn’t conflicting with pathfinder turn signal. I got smoked led pathfinder
Пікірлер: 67