Peter you should get the guys at Masso to support this pendant , man what a bonus to an already awesome controller. The Masso needs to be able to show the coordinates via usb. Keep up the great work.
@undecidedusername9191
5 жыл бұрын
Thank you for the clear informative videos. I have watched a few of them now and they are always satisfying in that I always find exactly what I'm looking for!
@cncnutz
5 жыл бұрын
Thanks Justin, Much appreciated. Cheers Peter
@DaveGatton
5 жыл бұрын
I keep mine on the side of my controller enclosure. It has some pretty strong magnets on the back of it. Glad it made it there without damage.
@cncnutz
5 жыл бұрын
Thanks Dave. I looked the through the manual but doesn't mention the magnets and it didn't stick to the wood and Aluminum of my machice. I tried it just now and it sticks ok to a large flat plate but not to smaller pieces of steel. Could screw a plate to the machine leg. Cheers Peter
@danielbraud6646
5 жыл бұрын
Yes, the same thing here. Just recently install the UCCNC400ETH controller and will be soon installing UCCNC software. we'll see how that works. Appreciate your help and I'm always looking forward to your next posting. Keep up the good work. Your Fellow CNCnut, DAN
@cncnutz
5 жыл бұрын
Thanks Dan
@rorymccann9198
8 ай бұрын
looking at the wireless version which works with uccnc .. it has been a while peter hope all is well , miss the great informative videos . are you still into the cnc hobby ?
@Greolt
5 жыл бұрын
Peter. Another excellent video. I have used one of these pendants with UCCNC for about a year now. Wireless one. You only need to enable the plugin. Don't have to "Call on startup"
@cncnutz
5 жыл бұрын
Thanks I will uncheck it and give it a try. Cheers Peter
@mindfulmunchkin1215
5 жыл бұрын
Can you reply with the model you are using? id love a wireless one instead.
@johnrevill9592
5 жыл бұрын
Another great video Peter. I have the same Pendant and love it. I have macro button 7 set to save offsets (Way down near the bottom of the list). This way I can set my XYZ for a job, press macro 7 and the offsets are saved. This means if there is a power out, I will not loose my offsets.
@cncnutz
5 жыл бұрын
Good idea John.
@timhalcomb4041
5 жыл бұрын
Appreciate you taking the time to share this information have a blessed day
@cncnutz
5 жыл бұрын
Thanks Tim
@bussergi
Жыл бұрын
I have that exact pendant. Have you tried to use it with your Masso? I would really love to make that work together
@ajbishop890
2 жыл бұрын
Hi Peter, I know this was done 3 years ago. How is the stepper motors connected. Is there a separate motion controller like AXBB-E to connect everything and use the Pendant after plug into computer. Another Kiwi asking. Thanks bro
@ianbunting8860
4 жыл бұрын
hi. i have one of these.i dont know if you spotted them on the backface,but there are 4 magnets so you can attach it to any steel object. i cut a piece of steel plate with a lip on the botom to dtop it sliding down. thanks for the vid,you picked up on a few points that i hadnt noticed
@cncnutz
4 жыл бұрын
Thanks Ian. Note that there was an error in the video that I corrected on my website. Click the link under the video. In the video I show that you need to put a check in the call at startup box. This is incorrect and checking this box will cause the configuration box to open at startup. If you leave it unchecked the pendant will still work and you will not be bothered by the start up box when you start UCCNC. cheers Peter
@android4cg
5 жыл бұрын
With the help of your video i managed to successfully install the HB04 for UCCNC in only 5 minutes. Many thanks for this really great video!!! BTW ... is it possible to zero in UCCNC the XYZ like in Estlcam CNC SW? Means i am moving X, Y or Z until it hits my probe and the moving axis will be automatically set to zero when the probe sends the signal. I only need to configure probe distance and cutter diameter. Is there any plugin available to do this? I am new in UCCNC and really like the way it works in Estlcam.
@cncnutz
5 жыл бұрын
The autozero macro I did a video on will do that for the Z Axis as Nd if you have a look at the 2017 screenset www.thecncwoodworker.com/uccnc.html There are a series of macros for locating X & Y. One of them might work for you the way you want. Very nice screenset even if it doesn't. He has some videos about the features you can watch and see if it is what you want. Cheers Peter
@tomjdesigns1280
3 жыл бұрын
3:09 thanks, this clarify and XHC HB04 which never works good on mach3 works well with uccnc
@john2478
5 жыл бұрын
Peter Excellent helpful videos. I am just getting to grips with UCCNC and AXBB-E controller with closed loop steppers for a new system. On my old systems I use Mach 3 but like the idea of a new challenge! I have my steppers working now and wanted to add my WiXHC WHB04B wireless Pendant that I use on my old system. The standard plugins only feature the usb wire connection and that does not work. Do you know if there is an updated plug in for this pendant, which is excellent by the way. John
@cncnutz
5 жыл бұрын
Sorry John I don't. Short of looking on the UCCNC forum and checking I can't suggest anything thing. Cheers Peter
@john2478
5 жыл бұрын
@@cncnutz I just bought a wireless version of the HB04 you have reviewed. It was ordered direct from China and came with no instructions and no drivers. As I mentioned I use UCCNC now. I was amazed to find that it worked straight out of the box. I just made sure that the USB receiver was plugged into the computer before switching on the hand unit. I used the supplied UCCNC plugin. The quality of it is not as good as the old WiXHC Pendant that I have been using under Mach 3. The switches feel very plasticky but I guess so long as they work that is all that matters. There is no Plugin for the better WiXHC pendant unfortunately. John
@24coroneo
4 жыл бұрын
Hi Peter good explanation you make it look easy is this Pendant still available on line there seems to be a lot to choose from I read on an ebay that someone had bought one just like the one you have but it only worked only on Mach3 so that makes me a bit anxious to buy one you know what I mean didn't you say you were selling yours? I am using UCCNC software
@cncnutz
4 жыл бұрын
Personally even though it has all the bells and Whistles I prefer the cheap pendant I used before it. It works well but you need 2 hands to use it. My other pendant works with 1 hand and I don't need to look at it. I have no intestine in seeing the info on the lcd screen as I want to see what is happening on the table. I also never managed to get it working on Mach3 bit worries we'll on UCCNC. If you live in NZ I'm happy to sell. Just my personal opinion. Sometimes simple is better. Cheers Peter
@johncoroneo900
4 жыл бұрын
Hi thanks for that I think I'll stick to my wireless keyboard works fine John
@mikescalise8380
3 жыл бұрын
Sir, I have the same pendant only wireless with UCCNC and I can't get the axes to move, spindle & table feed work thou and all the other buttons. Do you have any idea what I could check? Thank you.
@nielsenminibio
5 жыл бұрын
Hi Peter. Thanks for another fine video. Have you experienced any problems with Z probing when enabeling the plugin for the HB04? My UCCNC installation does not probe correctly when using the plugin for either the HB04 or the UCR201 which I also bought.
@cncnutz
5 жыл бұрын
Its working alright so far for me Jan.
@nielsenminibio
5 жыл бұрын
@@cncnutz Hi again Peter. I´m still struggeling with issues regarding the pendant. Could I ask you what UCCNC version and what windows you are running (Windows 7/8/10, language 32/64bit).
@chivasdeguadalajara
4 жыл бұрын
Will this work with uccnc on the AXBB-E controller? Or is it just the software that matters? Also would the wireless model work the same and what model for it would work if so?
@bryanharness1122
2 жыл бұрын
Great vid for newbie
@cncnutz
2 жыл бұрын
Thanks Bryan Cheers Peter
@Elchapo62
Жыл бұрын
Hi Peter , I can't find a wired HB04, do you know if the UCCNC plug in works with wired and wireless, thanks.
@Elchapo62
Жыл бұрын
Found it, Ebay.
@MegaTopdogs
5 жыл бұрын
Thanx Peter Nice video.
@cncnutz
5 жыл бұрын
Thanks Geert
@seanwillmott8294
5 жыл бұрын
Hey Peter do you think the latest MPG's offering from eBay will work all the same?
@cncnutz
5 жыл бұрын
Honestly couldn't tell you Sean. You would need to find a review from someone who uses the one you are looking at. Cheers Peter
@seanwillmott8294
5 жыл бұрын
@@cncnutz All good Peter thx Mate
@danielbraud6646
5 жыл бұрын
I too purchased this unit +- more than a year ago. I tried it on Mach 3 and not all bottoms operated. I tried programming; with nothing changed. Do you know how to update drivers? I have not found a web site that provides updates. I hope a more current ver. of the driver may solve the issues. Dan
@cncnutz
5 жыл бұрын
Hi Daniel After recording the video I went and looked to do a Mach3 install of the Pendant and after 2 days i still can't get Mach3 to even recognize it. I downoaded the ShuttlePro plugin from the Mach3 site as well as numerous other suggested plugins so not sure what is going on. Since it is designed for Mach3 that should have been the easy part and UCNCN should have been the problem. I will keep trying and see where I am going wrong.
@steinaralpenmob
5 жыл бұрын
Hello Peter, first of all, thanks for the nice video, have learned a lot from them, continue to make many many more. Seeing there are several who have trouble getting Pendant to work at Mach3 (Daniel Braud) and probably many more, I did not get it to work. Hope you find out and make a video showing setup on Mach3. thanks again for nice channel
@cncnutz
5 жыл бұрын
Hi Steinar Have you seen this video? kzitem.info/news/bejne/p2eJz52eqWKfhqQ I go through setting up the pendant. Cheers Peter
@steinaralpenmob
5 жыл бұрын
Yeah, it did and it looked okay but I have Mach3 with XHC-HB04 Pendant and it would have been nice if you could show it with it too. And once again great videos you make, thank you Peter Sorry for the late response but there has been a lot of work at work: www.hotel-ullensvang.no/
@cncnutz
5 жыл бұрын
For the life of me I can't get Mach3 to even recognise the pendant even though it is designed for it.
@steinaralpenmob
5 жыл бұрын
That's about the same problem I'm struggling with, but I'll try a little more and see what I'm getting into. have a nice day Peter
@RC-Flight
4 жыл бұрын
Steinar Alpen Hi did you ever get your pendant working with Mach3?
@digitalghosts4599
9 ай бұрын
Does anyone know if this also works with the wireless version of the pendant?
@FAELNYC
3 жыл бұрын
I just purchase the XHC WHB04B Wireless but for some reason does not look to work with uccnc, any suggestions?
@cncnutz
3 жыл бұрын
I don't know. When you say it doesn't work do you mean it turns on and shows the DRO's but turning the MPG doesn't move the axis or do you mean it is dead entirely. If the DRO's don't change when you turn the MPG you turn it, it my not be in MPG mode. Press the MPG mode button to enable the MPG. Cheers Peter
@andytaylor8802
2 жыл бұрын
Does this also work with uccnc and their own software. I don't have Mach 3.
@cncnutz
2 жыл бұрын
Hi Andy, The screenset is irrelevant to making the pendant work. It will work with the standard UCCNC screenset. Cheers Peter
@w4fej
4 жыл бұрын
I have the same pendant as yours but my machine is a Shapeoko XXL and was wondering if I can interface it to that machine. Do you have any idea ? Thanks, Mike
@cncnutz
4 жыл бұрын
Pendants do not interface with machines. They interface with control systems. You would need to check the control software you are running and see it it supports the pendant. Cheers Peter
@w4fej
4 жыл бұрын
@@cncnutz I realize the MPG interfaces to the control software. I'll rephrase the question. Do you know of anyone using the HB04 with Shapeoko's "Carbide Motion" control software. I have a home built 48X48" CNC that runs on CNCLinux and I was able to interface it easily to it. I would like to interface to the CC but I haven't found any docs for the CC software.
@cncnutz
4 жыл бұрын
@@w4fej sorry I don't know the system that you are speaking of. I can only suggest checking with the Shapoko community. Good to know it works with Linuxcnc. Cheers Peter
@tonysfun
4 жыл бұрын
Do you know if this can control the inexpensive CNC 3018? Thanks for your video!
@cncnutz
4 жыл бұрын
Thanks Tony It depends what controller software you are using. Cheers Peter
@tonysfun
4 жыл бұрын
I'm in middle of reorganizing my room, but the CNC3018 is the PRO version that comes with a larger -than the original- external controller - but I can't tell you what is the model number at this moment. But I did not update it, so it is the same as it comes with these inexpensive CNC's. The external LCD controller has a flat ribbon cable that plugs into the main board. I purchased it here: www.amazon.com/gp/product/B07DXMFY38/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1 It is GRBL If that isn't enough info, I'll try to dig to it and give you the model number. Thank you for a quick reply and thanks for sharing with all of us your videos!
@cncnutz
4 жыл бұрын
The pendant works with UCCNC and Mach3, though I never got it to work with Mach3 myself. It will not work with your current setup. Cheers Peter
@tonysfun
4 жыл бұрын
@@cncnutz Great news! I'll order one and see if it works! Thank you very much! Stay safe from Corona and other viruses!
@PSS_1
3 жыл бұрын
where to download the file for the "fishing rod" which should be uploaded to the appropriate directory?
@ljgault
5 жыл бұрын
It has a magnet on the back you can hang it up with. I need to figure out how to do micro's with mine on Mach3.
@cncnutz
5 жыл бұрын
Thanks Larry. I will check it out. I never thought of magnets but then my machine is wood and aluminum. Cheers Peter
@johnrevill9592
5 жыл бұрын
Ahh Yeah. I forgot about that. The four pads of the back of the pendant are magnets so the pendant will stick to many surfaces. It's a shame my CNC is mostly Aluminium and the CNC table is wood.
@dharmendrasuthar4342
3 жыл бұрын
Is this controller gonna work with masso g3..?
@cncnutz
3 жыл бұрын
No. MASSO will not work with this pendant.
@dharmendrasuthar4342
3 жыл бұрын
@@cncnutz can you please suggest some similar types of pendant that can work with masso.
@cncnutz
3 жыл бұрын
MASSO sells a pendant that works and if you want wireless you an look at the wireless pendant I use on mine. Cheers Peter kzitem.info/news/bejne/15B-qp-NrIiDeoY
@ashraffmohamed6912
3 жыл бұрын
Sir can i use this for nc studio?
@cncnutz
3 жыл бұрын
I have no idea but I suspect not. Cheers Peter
@Z-add
5 жыл бұрын
Will this pendant work with masso. The one made by masso is very basic.
@cncnutz
5 жыл бұрын
No. You cannot use any usb pendant on Masso. Cheers Peter
@avnitechs
2 жыл бұрын
not instant movement, delayed function
@chrisadesigns
5 жыл бұрын
I notice your sponsored by masso. Why don't you use the controller?
@cncnutz
5 жыл бұрын
That pendant is not made to work with one. In fact I still can't get it to work with Mach3
@chrisadesigns
5 жыл бұрын
@@cncnutz why don't you use a masso?
@brians85
5 жыл бұрын
A video about UCCNC sponsored by Masso.
@cncnutz
5 жыл бұрын
It's a brave new world we live in Brian.
@Askjerry
5 жыл бұрын
10:38 - If only you had a CNC machine to cut out a "C" shaped wall mounted bracket it could slide into...
@cncnutz
5 жыл бұрын
Yeah, but what's the chance I will ever own one of those. Cheers Peter
Пікірлер: 85