Hey Jeff, the instruction give an upper limit of 10. However, we suggest setting your stabilizer to 4-6. Most of our bikes that we have and install. We set to 4. We do have some heavier men that prefer higher settings. However, let’s understand the assembly. The stabilizer is installed as a shock arrester. The lower the setting, the better for the rider. The higher, the setting, the more restriction. For bigger, stronger people this may not be an issue. But for most riders we find 4-6 being the sweet spot.
@jeffpolara3760
Жыл бұрын
Read all the reviews and decided to purchase one. Man they were not lying no kidding this is a GAME CHANGER..... It really feels MUCH MORE STABLE AND LESS VIBRATION THRU THE WHEEL DEPENDING ON THE ROAD. The videos were spot on and it took about and hour or so. I will say though that I need some slight adjustment of a 1/8 or 1/16 hereor there to make it so it did not jam or bottom out the cylinder. on full turn to one side. I do feel this is my sport model and not the kits fault. If you need to adjust just do a little at a time and you will be fine. Drove 100 miles today at the 5 setting and seems to be perfect. I was unable to find a video describing why to set it at only 6 at the highest but with so many people saying either 4 but no higher than 6 I don't think I want to test it out lol. Over all THIS IS A MUST HAVE FOR A RYKER.
@edfarley2257
Жыл бұрын
Got mine today. New 2022 owner here and thanks for selling me a piece of junk! Kidding, totally kidding. Great quality, great video and it rides AMAZING. Took me an hour and 1/2. I am not very mechanically inclined but it turned out exactly in perfect position. Would have been done a lot sooner if I wouldn't have messed up 1 of the measurements. Far as I'm concerned this is a must have if your riding on roads like me (Indiana) Thank you, great experience all the way around
@PeteyG76
2 жыл бұрын
I really like this product, it definitely makes for a more controlled ride.
@ryker4124
Жыл бұрын
Got mine today and installed. Very nice kit. The parts are top notch and the instructions are above and beyond. Significant difference in handling and stability. Nice job.
@rykermod3521
Жыл бұрын
Thank You
@dweible
Жыл бұрын
Fantastic level of detail on these install instructions. Thank you much!
@rykermod3521
Жыл бұрын
Thank You
@Daniel_Size_12
Жыл бұрын
Seems a litle too expensive. I forgot to say that your install video was easy to understand and follow. Thanks.
@rykermod3521
Жыл бұрын
Worth every penny:)
@chrissuddes
5 күн бұрын
Thanks for this, very helpful
@martinhensley8785
Жыл бұрын
I wish i could afford this but my wife told me i was done buying parts for my ryker this year .
@BlakICE
2 жыл бұрын
Nice Video! Great Product! I'll try and get one to review on my channel soon!
@kobiturbo
2 жыл бұрын
It works just great 😁
@rykermod3521
2 жыл бұрын
Thank You:)
@devilrayhandlebars6774
2 жыл бұрын
Nice video
@gbyoung2
8 күн бұрын
I was curious what the torque specs were as well. I bought a used 2022 with the damper already installed by the PO, so I've got no instructions. Unfortunately, one of the cap bolts clamping the bracket to the steering down tube were broken and I had to get a replacement. Because of that little incident I want to go over the entire install myself and will need the torque specs to do that.
@rykermod3521
8 күн бұрын
We will be happy to provided printable instructions if needed. The broken fastener is usually due to improper installation methods and the instruction not be followed. Not to mention over torquing the fastener in question. Please feel free to contact us directly at info@RykerMod.com
@StansE250
6 ай бұрын
I understand that your focus is on the Ryker; however, since you also engineer & fabricate, I was hoping for input (on a ‘relative’ application). For Dual-Sport / Enduro motorcycles, the go-to seems to be the ‘pod’ style damper (e.g. Scotts). I have had many street/sport bikes, but not dirt bikes. Do you think that a linear damper would/could work on a dirt bike ? Or, can you think of a compelling reason why they don’t seem to be used other than folks’ need to buy expensive bling ? I appreciate you. Sharp parts design & production. Excellent explanations.
@rykermod3521
8 күн бұрын
Linear Dampers are available for dirt bikes. In the shop we install them on road bikes. I suggest finding a group like GS adventurers or a group relative to the bike in question. I'm sure you'll have plenty of enthusiast that can help.
@meon3271
2 жыл бұрын
Why didn't you just use a shorter bolt in the rear mount instead of the spacer for the stabilizer ?
@rykermod3521
2 жыл бұрын
This allows one to upgrade to an Ohlins damper later without needing a new hardware kit.
@darrickhullum5453
6 ай бұрын
Is there a different on the road 🤔
@rykermod3521
6 ай бұрын
Please read the comments below. It eliminates handlebar shake and the unsettling shifty and drifting feeling when riding on rough roads.
@allanstaples2327
Жыл бұрын
Just installed kit as per instruction and video. End of damper hits plastic. Help
@rykermod3521
Жыл бұрын
Allen send pictures to us, We can help... info@rykermod.com you can also watch this video. kzitem.info/news/bejne/mZ5r2puEoJarfZg
@robertjette433
3 ай бұрын
I added one last summer and after only 4500 miles it started leaking oil.
@rykermod3521
8 күн бұрын
The dampers are warrantied, if you are the original owner of the kit.
@joez7700
6 ай бұрын
Hi for anyone that has this installed I have a question. It appears that the assembly covers the oil filter cap. Do you need to remove the whole assembly when doing an oil change?
@rykermod3521
6 ай бұрын
You do not, however we sometime remove the damper rod from the front bracket for bigger hands:)
@doctormatos
11 ай бұрын
Hi what is it size of braket ?
@douglasmckay5968
8 ай бұрын
How about the adjustment on the dial
@rykermod3521
8 ай бұрын
We have our set on 4-5
@israelrodriguezdrummer9311
Жыл бұрын
Hello, where did you get the other steering clamp since I have seen that they only sell them with one, thanks from Mexico
@rykermod3521
Жыл бұрын
The clamps ares manufacture by RykerMod and sold as a kit www.rykermod.com we have 3 kits to choose from.
@bxodyssey
2 жыл бұрын
You mentioned adjusting the wheel, but what number are you setting it to (does setting it to a higher number make it harder to steer) ?
@rykermod3521
2 жыл бұрын
Adjustment instructions are covered in the installation manual. To answer your question stabilizers are not installed for restriction but for shock arrest. It is a best practice to set your stabilizer to its minimal affective setting.
@ShaughnGray
2 жыл бұрын
Can the oil filter be changed with the damper installed?
@DocXGen
2 жыл бұрын
Great question, I would like to know that as well
@rykermod3521
Жыл бұрын
It can, Reposition the crossbar bracket so the oil canister fasteners are still accessible.
@ShaughnGray
Жыл бұрын
@@rykermod3521 Do you have a measurement for the move or just wing it?
@rykermod3521
Жыл бұрын
@@ShaughnGray we provide written instruction and pictures with the kit. The video also gives the required dimensions.
@ShaughnGray
Жыл бұрын
@@rykermod3521 I installed it by instructions. You said move it to clear the oil canister. How many inches do I add to the original instructions?
@jeffpolara3760
11 ай бұрын
Ok I have a question and no matter were I search cant get the answer... The instructions and such are great but it says in multiple places do not go over setting 6. on mine it does run awesome at five or six. However I wonder if 7 or 8 might even be better. But for the life of me I cant find any information. In one video someone ran it at 8 but he had very little information. Any chance someone can help? I don't want to mess it up by going higher. I tried the web site but cant find a phone number for the company...
@rykermod3521
8 күн бұрын
Our suggestion is to not go over 10 in the instructions supplied with the kit. However do remember this damper is a shock arrestor and really does not require much pressure to do so. Our email address is on the contact page of the website:) Info@rykermod.com
@ldhjr1
12 күн бұрын
What is the torque??
@rykermod3521
8 күн бұрын
Please contacted us directly for technical information needed. Info@RykerMod.com
@OutbackKanga
Жыл бұрын
What are the dimensions of the spacers please ..I need to make a couple as mine are missing .
@rykermod3521
Жыл бұрын
Get in touch with us and we can send replacements. Info@rykermod.com
@cjonescustomz
2 жыл бұрын
Need the link to purchase.
@rykermod3521
2 жыл бұрын
www.RykerMod.com
@YoloVib3s
2 жыл бұрын
is this meant to be an alternative to replacing the sway bar?
@rykermod3521
2 жыл бұрын
This system eliminates handle bar shake or pull away while riding on rough roads or riding over large bumps. Improves handling in turns and gets rid of the drifty feeling in the straights. We've used them forever on road bikes for the same reason, (Common term Tank Slapper) we just developed a way to apply the technology to the Ryker. Sway bars and end links really do not do the same thing. Please read more on www.RykerMod.com Video coming soon.
@Dan.a.k.a.bradpitt
Жыл бұрын
Why for only non turbo bikes?
@israelrodriguezdrummer9311
Жыл бұрын
your esperience whit this device????
@rykermod3521
Жыл бұрын
A steering stabilizer for the Can-Am Ryker style of bikes.
@randyashman6532
2 жыл бұрын
What are the torque specs. Lol.
@rykermod3521
2 жыл бұрын
They are supplied in the printed instructions, delivered with the kit.
Пікірлер: 62