Question so when you do your oil change, do you have to remove the front bracket that’s on top of the filter to do your oil change?
@robertjette433
28 күн бұрын
I added one last summer and after only 4500 miles it started leaking oil.
@StansE250
3 ай бұрын
I understand that your focus is on the Ryker; however, since you also engineer & fabricate, I was hoping for input (on a ‘relative’ application). For Dual-Sport / Enduro motorcycles, the go-to seems to be the ‘pod’ style damper (e.g. Scotts). I have had many street/sport bikes, but not dirt bikes. Do you think that a linear damper would/could work on a dirt bike ? Or, can you think of a compelling reason why they don’t seem to be used other than folks’ need to buy expensive bling ? I appreciate you. Sharp parts design & production. Excellent explanations.
@darrickhullum5453
3 ай бұрын
Is there a different on the road 🤔
@rykermod3521
3 ай бұрын
Please read the comments below. It eliminates handlebar shake and the unsettling shifty and drifting feeling when riding on rough roads.
@joez7700
3 ай бұрын
Hi for anyone that has this installed I have a question. It appears that the assembly covers the oil filter cap. Do you need to remove the whole assembly when doing an oil change?
@rykermod3521
3 ай бұрын
You do not, however we sometime remove the damper rod from the front bracket for bigger hands:)
@douglasmckay5968
5 ай бұрын
How about the adjustment on the dial
@rykermod3521
5 ай бұрын
We have our set on 4-5
@doctormatos
8 ай бұрын
Hi what is it size of braket ?
@rykermod3521
8 ай бұрын
Hey Jeff, the instruction give an upper limit of 10. However, we suggest setting your stabilizer to 4-6. Most of our bikes that we have and install. We set to 4. We do have some heavier men that prefer higher settings. However, let’s understand the assembly. The stabilizer is installed as a shock arrester. The lower the setting, the better for the rider. The higher, the setting, the more restriction. For bigger, stronger people this may not be an issue. But for most riders we find 4-6 being the sweet spot.
@jeffpolara3760
8 ай бұрын
Ok I have a question and no matter were I search cant get the answer... The instructions and such are great but it says in multiple places do not go over setting 6. on mine it does run awesome at five or six. However I wonder if 7 or 8 might even be better. But for the life of me I cant find any information. In one video someone ran it at 8 but he had very little information. Any chance someone can help? I don't want to mess it up by going higher. I tried the web site but cant find a phone number for the company...
@jeffpolara3760
9 ай бұрын
Read all the reviews and decided to purchase one. Man they were not lying no kidding this is a GAME CHANGER..... It really feels MUCH MORE STABLE AND LESS VIBRATION THRU THE WHEEL DEPENDING ON THE ROAD. The videos were spot on and it took about and hour or so. I will say though that I need some slight adjustment of a 1/8 or 1/16 hereor there to make it so it did not jam or bottom out the cylinder. on full turn to one side. I do feel this is my sport model and not the kits fault. If you need to adjust just do a little at a time and you will be fine. Drove 100 miles today at the 5 setting and seems to be perfect. I was unable to find a video describing why to set it at only 6 at the highest but with so many people saying either 4 but no higher than 6 I don't think I want to test it out lol. Over all THIS IS A MUST HAVE FOR A RYKER.
@rykermod3521
10 ай бұрын
Contact us when you’re ready:) we’ll be here to help.
@martinhensley8785
10 ай бұрын
Just did the steering stabilizer want to do this when i can afford it or at the very least the end links
@saffoto
10 ай бұрын
Thanks for the video this helped me out
@martinhensley8785
10 ай бұрын
I wish i could afford this but my wife told me i was done buying parts for my ryker this year .
@broderp
11 ай бұрын
I wish you would have shown the adjustment. It seems that both cap bolts are fixed, but I'm not sure -Hence my previous comment. I also wonder why the end is so long. Couldn't you just cut off several inches of the rod?
@rykermod3521
11 ай бұрын
The system needs the full stroke of the the stabilizer to work properly, if you cut the rod; the rod will travel inside the stabilizer body and and damage the stabilizer.
@mattdavis4759
8 ай бұрын
@@rykermod3521is the steering stabilizer rebuildable?
@reymelendez3294
Жыл бұрын
What stabilizer is that you have installed?
@rykermod3521
Жыл бұрын
www.rykermod.com We own the intellectual property for the Stabilizer.
@blairguinea6811
Жыл бұрын
Great vid Sir , very informative and detailed you didn't get a lot more views, thankyou
@dweible
Жыл бұрын
Fantastic level of detail on these install instructions. Thank you much!
@rykermod3521
Жыл бұрын
Thank You
@paulbuttner6808
Жыл бұрын
Great video of the removal and installation of the new stainless sway bar. It must handle great now? I see you have already installed a steering stabilizer and how much did that improving the handling?
@rykermod3521
Жыл бұрын
It is a dramatic difference. The Drifty feeling and handlebar shake is gone.
@jd43jw
Жыл бұрын
Triple checked all my measurements with a machinists ruler. Brass rod gently pushes up against the bottom of the air box but clears the bottom panel. On our other bike it misses the air box but brushes the bottom panel. Otherwise very happy with the performance of the damper.
@israelrodriguezdrummer9311
Жыл бұрын
your esperience whit this device????
@rykermod3521
Жыл бұрын
A steering stabilizer for the Can-Am Ryker style of bikes.
@israelrodriguezdrummer9311
Жыл бұрын
Hello, where did you get the other steering clamp since I have seen that they only sell them with one, thanks from Mexico
@rykermod3521
Жыл бұрын
The clamps ares manufacture by RykerMod and sold as a kit www.rykermod.com we have 3 kits to choose from.
@MetalDetectoristMick
Жыл бұрын
Would bolt cutters be able to cut the sway bar, or is it hardened to the point bolt cutters won't work?
@rykermod3521
Жыл бұрын
Bolt cutters can work however they need to be 36 inch or larger.
@allanstaples2327
Жыл бұрын
Just installed kit as per instruction and video. End of damper hits plastic. Help
@rykermod3521
Жыл бұрын
Allen send pictures to us, We can help... [email protected] you can also watch this video. kzitem.info/news/bejne/mZ5r2puEoJarfZg
@BLRTUNING
Жыл бұрын
Looks great Richard
@rykermod3521
Жыл бұрын
Thank You Sir.
@rudyrodriguez5291
Жыл бұрын
Do you have to torque them down? Inch pounds?
@rykermod3521
Жыл бұрын
The torque spec for a 6mm 8.8 bolt is 12 NM. There is a measure of safety when using the factory bolt and nut. As the nut is a Nylock nut and will retain itself and will not loosen.
@OutbackKanga
Жыл бұрын
What are the dimensions of the spacers please ..I need to make a couple as mine are missing .
@rykermod3521
Жыл бұрын
Get in touch with us and we can send replacements. [email protected]
@edfarley2257
Жыл бұрын
Got mine today. New 2022 owner here and thanks for selling me a piece of junk! Kidding, totally kidding. Great quality, great video and it rides AMAZING. Took me an hour and 1/2. I am not very mechanically inclined but it turned out exactly in perfect position. Would have been done a lot sooner if I wouldn't have messed up 1 of the measurements. Far as I'm concerned this is a must have if your riding on roads like me (Indiana) Thank you, great experience all the way around
@Daniel_Size_12
Жыл бұрын
Seems a litle too expensive. I forgot to say that your install video was easy to understand and follow. Thanks.
@rykermod3521
Жыл бұрын
Worth every penny:)
@ryker4124
Жыл бұрын
I've watched several install videos and every one has a different outcome as to where the rod travels. When I installed mine I was careful to get all the measurements correct but my rod also hit the plastic. After double checking all measurements to confirm they were spot on I ended up moving the back bracket slightly up. Now the rod doesn't hit the plastic.
@ryker4124
Жыл бұрын
Got mine today and installed. Very nice kit. The parts are top notch and the instructions are above and beyond. Significant difference in handling and stability. Nice job.
@rykermod3521
Жыл бұрын
Thank You
@ryker4124
Жыл бұрын
Why so expensive? Can get them for other bikes for under $100.
@rykermod3521
Жыл бұрын
Ohlins stabilizers SD 002 and SD 003 units retail for $565.00, Counterfeit Ohlins units are less but in no way even comparable. www.amazon.com/Ohlins-Steering-Damper-Sd-003/dp/B00AIDZXTC/ref=mp_s_a_1_16?crid=3P75WHG6KX314&keywords=ohlins+sd&qid=1666298527&qu=eyJxc2MiOiIxLjY2IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=ohlins+sd+002%2Caps%2C82&sr=8-16&ufe=app_do%3Aamzn1.fos.2b70bf2b-6730-4ccf-ab97-eb60747b8daf
@broderp
11 ай бұрын
Can you prove your statement above is true? What subjective testing can be shown to justify the price?
@PeteyG76
Жыл бұрын
I really like this product, it definitely makes for a more controlled ride.
@bobbond6028
Жыл бұрын
I'll be ordering a few things when I get my 2023
@kobiturbo
Жыл бұрын
It works just great 😁
@rykermod3521
Жыл бұрын
Thank You:)
@devilrayhandlebars6774
Жыл бұрын
Like it
@rykermod3521
Жыл бұрын
Thank You:)
@devilrayhandlebars6774
Жыл бұрын
About time man they should have done this at can am from he start
@grantlamarche
Жыл бұрын
They designed the Ryker like their Bombardier snowmobiles. Snowmobiles don't need a stabilizer but these Rykers sure do! I'll be installing one on my wife's 900 soon...
@devilrayhandlebars6774
Жыл бұрын
Nice video
@BlakICE
Жыл бұрын
Nice Video! Great Product! I'll try and get one to review on my channel soon!
@bxodyssey
Жыл бұрын
You mentioned adjusting the wheel, but what number are you setting it to (does setting it to a higher number make it harder to steer) ?
@rykermod3521
Жыл бұрын
Adjustment instructions are covered in the installation manual. To answer your question stabilizers are not installed for restriction but for shock arrest. It is a best practice to set your stabilizer to its minimal affective setting.
@meon3271
Жыл бұрын
Why didn't you just use a shorter bolt in the rear mount instead of the spacer for the stabilizer ?
@rykermod3521
Жыл бұрын
This allows one to upgrade to an Ohlins damper later without needing a new hardware kit.
@ShaughnGray
Жыл бұрын
Can the oil filter be changed with the damper installed?
@DocXGen
Жыл бұрын
Great question, I would like to know that as well
@rykermod3521
Жыл бұрын
It can, Reposition the crossbar bracket so the oil canister fasteners are still accessible.
@ShaughnGray
Жыл бұрын
@@rykermod3521 Do you have a measurement for the move or just wing it?
@rykermod3521
Жыл бұрын
@@ShaughnGray we provide written instruction and pictures with the kit. The video also gives the required dimensions.
@ShaughnGray
Жыл бұрын
@@rykermod3521 I installed it by instructions. You said move it to clear the oil canister. How many inches do I add to the original instructions?
@BLRTUNING
Жыл бұрын
Great video on how to troubleshoot this issue.
@rocboy70
2 жыл бұрын
What's the advantage of going with the upgraded version?
@rykermod3521
2 жыл бұрын
Ohlins is a truly superior stabilizer, used in most competitive arenas like Moto GP, Motocross and the like. The technology built into their product is considered industry best. To find out more on what makes them so good visit www.Ohlins.com . It's more than I can cover here. Now a quick comment on the JFG Universal stabilizer. It works and works well for the everyday rider. It is a good quality unit and is a great application for anyone wanting to improve stability and confidence.
@rocboy70
2 жыл бұрын
Thx for the info. I'm interested and will look into this.
@rykermod3521
2 жыл бұрын
@@rocboy70 www.rykermod.com
@randyashman6532
2 жыл бұрын
What are the torque specs. Lol.
@rykermod3521
2 жыл бұрын
They are supplied in the printed instructions, delivered with the kit.
@andreysmirnovusa
3 ай бұрын
@rykermod3521 can't you just tell what they are?
@cjonescustomz
2 жыл бұрын
Need the link to purchase.
@rykermod3521
2 жыл бұрын
www.RykerMod.com
@YoloVib3s
2 жыл бұрын
is this meant to be an alternative to replacing the sway bar?
@rykermod3521
2 жыл бұрын
This system eliminates handle bar shake or pull away while riding on rough roads or riding over large bumps. Improves handling in turns and gets rid of the drifty feeling in the straights. We've used them forever on road bikes for the same reason, (Common term Tank Slapper) we just developed a way to apply the technology to the Ryker. Sway bars and end links really do not do the same thing. Please read more on www.RykerMod.com Video coming soon.
Пікірлер