Quick tip : TIme is money - complete the pipework first, then while u pulling vacuum you can do electrical work. Let the AC run while you pack your van, if the job is a distance away , manually throw water in driptray to test, especially above a TV
@MarcelHVAC
Жыл бұрын
i do all that, i have even a special bottle with straw to shoot water in the inside unit tot test the drain.
@maracservices
Жыл бұрын
Thanks mate, appreciate it
@nbctcp3450
5 ай бұрын
agree with u. my worry only water drop from indoor to tv
@richardbartlett6932
3 ай бұрын
Definitely pipework in and done then faff around doing the other stuff , seems a very strange way of working and extremely slow. I'm guessing rates must be very good split bashing down under.. . Couldn't quite understand your accent regarding why you didn't come straight down and across as I see no reason not to have done. I also would have brought the outdoor unit right forward on the brackets for better airflow and cleaning. Overall a really neat and tidy job . Fair play
@craigladewig3158
Жыл бұрын
NIce work, some advice - get clients to remove TV's before you work , eliminates who pays for what if u where to damage the TV . I hate when I get to site and then need to spend time moving furniture and things around before I can actually get to installation. I also use old bed sheets to cover the area I work in, makes clean up much easier and also protects clients furniture and floor. All our houses are build from brick, so dust is the worst
@maracservices
Жыл бұрын
Thanks mate appreciate it
@andrsz3119
2 ай бұрын
You need to put crimp and lug terminals on the wire ends, twisting is not enough, otherwise it can cause an electrical fire in the long run. In EU this would not pass the inspections. Last time I saw these wire twisting techniques was in indian videos.
@MarcelHVAC
Жыл бұрын
Nice Mitch, i think the offset of the outside unit worked great. Minimum lengt of the lineset should be 3 meter and dont think you wil have reached that when going straight to the outside unit.
@maracservices
Жыл бұрын
Yeah it would have been pushing it going straight down. Cheers mate!
@scottk0623
Жыл бұрын
Perfect as always. I too only mount the center but when I drill my inside pilot hole I continue straight thru to the outside. I OFTEN wondered about you seeing snakes 😳I’m not liking spiders either. Great video stay well.
@maracservices
Жыл бұрын
Thanks mate. Haha this is the time of year the snakes are waking up so when I heard slithering noises in the bush I was just being safe by making noise but I’m 99% sure it was just a blue tongue lizard which are harmless and a great animal 😅
@gokhanturkyilmaz3443
3 ай бұрын
You could always measure from centre to exit hole. Then use stud finder. This will save a little time also and not have to drill then move
@44whip
Жыл бұрын
Hey man good video, you should feed the interconnect in off the drum as soon as the hole is cut. Wire it in then hang the indoor and shes all gravy
@robalexander7348
Жыл бұрын
A nice neat job Mitch. i am so Pleased that a Red Bellied Joe Blake never sprung out from under that thick growth 🥺 BTW a nice 26c here today, a great afternoon for a spin on my TREK MTB 😉
@maracservices
Жыл бұрын
Great weather to get out and about on the mountain bike!
@hamfish225
Жыл бұрын
not sure why I'm watching a video on how to install a heat pump but hey. I like the trunking, makes what could be ugly, look flash!
@maracservices
Жыл бұрын
Haha thanks!
@daneattard8640
2 ай бұрын
Good vid man , do you wire indoor before putting it up ??? Saves a little time I think
@Samuel-dc2mq
Жыл бұрын
You’re a true perfectionist….whats the brand and model of electric screwdriver you use for your finer work and electrical ?
@maracservices
Жыл бұрын
Thanks mate. So the brand is called Vessel. There’s a link to it in my video description section where you can see the model etc. cheers
@ronaldochea1259
5 ай бұрын
Good job! Clean and tidy
@mucca15497
8 ай бұрын
Loving these videos mate 👌🏽 Do you use the same measurement (and what’s the measurement in your opinion for the cleanest look) from ceiling to top of indoor bracket ? Or does it change with different sized units?
@maracservices
8 ай бұрын
Thanks mate, I honestly just eye it. Roughly 100mm I think is good. To high and to low looks weird to me.👍🏻
@angelberthoteroful
24 күн бұрын
Where did you get your electric screwdriver? I like it
@maracservices
24 күн бұрын
@@angelberthoteroful I bought it from total tools. The brand is called Vessel and it’s made in Japan. I like it. It’s good for electrical terminals but definitely doesn’t have enough torque for anything else. I find myself using my 12v impact for everything and the Vessel screwdriver for electrical work.
@Katana_00
2 ай бұрын
Clean work!
@musyorable
10 ай бұрын
Can you tell me the make of your cordless screwdriver please? Nice n good job 👏
@maracservices
10 ай бұрын
Thanks mate. The one I use in the video is, www.amazon.com.au/VESSEL-Rechargeable-Screwdriver-Cordless-No-220USB-1U/dp/B09C2W1NRY/ref=sr_1_6?crid=9YN7KMQPTMZZ&%3Bkeywords=vessel+electric+screwdriver&%3Bqid=1688415855&%3Bsprefix=vessel%252Caps%252C287&%3Bsr=8-6&_encoding=UTF8&tag=mitchattwood-22&linkCode=ur2&linkId=118e4b6f9b1b03fefbc655051e511ddb&camp=247&creative=1211
@terryharmsworth4663
2 ай бұрын
Nice clean work
@markharcourt2214
Ай бұрын
yes. I enjoyed watching him throwing all the wire the clippings over the place . Guess the guy has never thought of a bag
@omarfahil1602
Жыл бұрын
Nice job, where is your Rothenberger pipe cutter? Did you lose it? :)
@maracservices
Жыл бұрын
Still got it mate. I have another set and I just grabbed the first one I saw. All good, the rothenburgers will make an appearance again haha
@cristaljones809
7 ай бұрын
Tidy Install Mitch!
@mickhadji1793
Ай бұрын
Pour les cables souple il faut des embouts !
@rufinomolina6578
6 ай бұрын
Surge protector! Other than that amazing work 👏
@Superman3638
Жыл бұрын
beautiful work, pay much attention to detail ! by the way where can I find that electric hand screw driver?
@maracservices
Жыл бұрын
Thanks mate. The brand of the screw driver is called vessel. The link is in the video description. Cheers
@1967friend
Жыл бұрын
Was that a press nut used in the top mounting? Never seen that before, but I would question the security of such a thing in sheetrock. I would have had the customer remove the TV before hand. At bare minimum placed a towel over it.
@maracservices
Жыл бұрын
If you’re talking about the indoor unit, I used hollow wall anchors. These things, costlessbolts.com.au/hollow-wall-anchor-use-with-tool-ha-sthd/
@JitenderSingh-yr2np
11 ай бұрын
Good work sir
@ashutoshgupta224
5 ай бұрын
Can copper get corded near drains?? Reducing life of which ac you suggest to install in these areas
@zanelancaster2007
Жыл бұрын
Hello, my grandad's house got flooded and the Daikin unit did as well. The outdoor unit was completely submerged but the remote and indoor unit were not. Do we fix it or replace it?
@shaunchapman646
8 ай бұрын
Do you not do a nitrogen test for leaks?
@wanaraz
Ай бұрын
Worried about snakes? LOL Are we in Aussie land?
@maracservices
Ай бұрын
@@wanaraz haha yeah mate I’m in Australia. If that was indeed a snake, it was most likely venemous however it might of just been a blue tongue lizard. Lol
@harshchaudhary5380
4 ай бұрын
Is it made in India or made in Malaysia or Made in Thailand model?
@maracservices
4 ай бұрын
Made in Thailand
@Ohkeh640
10 ай бұрын
Hey Mitch Can you recommend someone good in Melbourne??
@maracservices
10 ай бұрын
Unfortunately not mate. I have contacts in QLD and NZ I could recommend but unfortunately I don’t know anyone is Melbourne. Id recommend just asking around. Word of mouth recommendations are the best way of finding good tradies. Goodluck!
@Pdcst2.0
9 ай бұрын
I know all type of air conditioning and refrigerating works
@tomm5712
Жыл бұрын
What size hole saw for the peno?
@MarcelHVAC
Жыл бұрын
around 60mm
@maracservices
Жыл бұрын
I think I used 52mm on this one because it was only a 2.5kW unit
@Pdcst2.0
9 ай бұрын
Hey mitch
@Pdcst2.0
9 ай бұрын
I want to work with you
@davidheacock1192
Жыл бұрын
Love your videos. But may just be my OCD but is the unit straight @ 13:34?
@maracservices
Жыл бұрын
Come on you know me better then that surely 😂 100% it’s level. The ceiling matches the pitch of the colourbond versiclad roof. So it’s the ceiling that’s purposely not level which makes it look like the unit is on the piss 😂
Пікірлер: 61