That's a great video. It gives me the courage to try it myself. The toilet in my main bathroom is too close to the wall behind it and it doesn't seat very well. I'll have to chip away some tile in addition to the concrete but what the heck. The toilet is out right now because the metal ring is messed up from the torque caused by the toilet sitting crooked. Today is Tuesday, I just may bite the bullet and give this a try Saturday when I'll have more time. Thanks for posting this!
@jonathandiyvega5486
3 жыл бұрын
You’re very welcome let me know if you need any more tips! Check out my other videos as well they might be very helpful!
@misterfung
2 жыл бұрын
How did it go??? Curious if it went well Dave!
@LrngToFly
3 жыл бұрын
Thanks for this video- finally getting around to completing a 1/2 bath in my basement in my house that I had built nine years ago. I had my builder do the rough plumbing. Where I put the wall for my bathroom it’s only 13 inches on one side of the wall. Am going to have to chisel the same fake wood tile I put in that looks exactly like your job! Wish I had learned about the 15 inch rule before I put in the tile! I think I noticed yours ha a crack- hopefully I won’t crack mine. And I thought finishing this bathroom was going to be easy!
@jonathandiyvega5486
3 жыл бұрын
Yeah that 15 inch rule sucks but I really wish you the best if you’re gonna tackle this job
@ATHSRV
2 жыл бұрын
Did this fix your problem. I have exactly same situation 13 inch from wall. I hope this will help to move 2 inch
@curtisroyston936
2 жыл бұрын
Great job 👍🏿
@LrngToFly
3 жыл бұрын
Wish I could add a photo to show just how similar my issue is to yours!
@davidjessee7701
3 жыл бұрын
Are u moving this to the side?? Because 12" is from the back wall center
@jonathandiyvega5486
3 жыл бұрын
Yeah moving to the side, the back was spaced perfectly
@el_ra
3 жыл бұрын
The previous owners of my places used an offset but installed it incorrectly and set the bolt in grout instead of the designated flange location now I got to chip into the tile to place a new flange correctly 😞
@jonathandiyvega5486
3 жыл бұрын
Good luck with your project ! I Hope my video helps you
@bill_nye_the_russianspy_9642
3 жыл бұрын
Will this work to slide my toilet over 2 inches? I'm 2 inches short for a new vanity i want to put in
@jonathandiyvega5486
3 жыл бұрын
These flanges usually only give you one to one and a half inches of offset hopefully you’ll find one that extends more than that but I doubt it
@bill_nye_the_russianspy_9642
3 жыл бұрын
@@jonathandiyvega5486 ok thanks! I may have to go with the smaller vanity to save a headache lol
@jonathandiyvega5486
3 жыл бұрын
@@bill_nye_the_russianspy_9642 oh okay but hopefully I was helpful enough for you good luck with your project !
@broadcastdepth3686
3 жыл бұрын
Good Video btw :) I watched the end 3X and could be in error, but it looks as though you merely glued two ends of pipe with the same diameter together at their ends. Although it might get by without leaking or otherwise causing a problem in the short term, I don't see that "joint" taking the punishment of the weight of the toilet and people without working its way loose in the ground causing the toilet, flange, offset joint and all to come out of the floor. If this is the case, It wouldn't fly where I come from.Respectfully, Negron
@Allegiance_Outdoors
2 жыл бұрын
I was thinking the same thing. I may just try cutting an inch off and have at least 1/2” overlap.
@davethezonie912
2 жыл бұрын
It isn't an end to end connection. The offset flange fits inside the pvc pipe that's in the concrete. He's swabbing the inside of the pipe in the ground and swabbing the outside of the offset flange before inserting the offset into the pipe in the ground. When I followed this procedure it worked perfectly for me. If anyone is concerned about cutting off the top of the pipe in the ground, here's a video that shows how to remove the glued in flange to keep the height of the pipe in the ground. kzitem.info/news/bejne/uaaAp6eImn18mHo
Пікірлер: 25