im stripping some of those large printers u mentioned. i was using normal Phillips screwdrivers and they worked but some screws were quite difficult to open. then one of the technicians at the company lent me some Vessel screwdrivers and they worked like magic- every screw opened so much more easily.
@MarkFox
5 жыл бұрын
I showed the service guy that was fixing my 36" Roland printer Vessel screwdrivers and he was amazed.
@ScoutCrafter
6 жыл бұрын
Hello Mark! Awesome video!!!!! I recently heard that they use wooden handle Screwdrivers a lot in the aviation industry because they don't transfer heat thru the handles! I never knew that but it makes sense! Thanks again!!!!!!
@MarkFox
6 жыл бұрын
Thank you! You should make a "How To" video on buffing, I just got another old vise in very good condition and I want to buff out the handle to a brilliant shine but I'm not sure of the proper compound or method to use. I recently got a new dual 8" wheel setup but it came with awful buff wheels and I just ordered 2 new ones from Amazon that had good reviews.
@836dmar
4 жыл бұрын
ScoutCrafter I have lots of friends that worked for the airlines and I have helped a lot working on smaller aircraft and do most of my own maintenance. Three friends were TWA mechanics and all had similar knurled aluminum handled Apex bit drivers made by the machine shop there (called “The Hobby Shop”). I have never once heard this wooden handle story at all. And to me it does not make sense(no offense intended). One doesn’t generally work on hot engines and even if they did, SnapOn and other plastic handles don’t transfer heat either. Does any screwdriver really do that? Show me a heat source hot enough that it would transfer through the handle but not so hot that you wouldn’t radiantly burn your hand. Most screwdriver use on an aircraft is removing cowlings and panels. By the time you get the cowling removed, etc. an air cooled engine is already fairly cool. Other than some intake hose clamps and baffling screws there are not really many screws on the deeper hot parts of those engines. I suspect it’s a wives tale. Sorry for the rant but these stories tend to take hold of not discussed.
@robertmills6497
4 жыл бұрын
Wooden handles dont slip as much when your hands are oily and dont melt when they come into contact with heat (Main reason is grip). To be honest everyone I know who works in aviation has boxes of snap on screwdrivers and no wooden handles to be seen.
@stever5887
4 жыл бұрын
J.I.S. is the abbreviation for "Japanese Industrial Standard", for those who don't know. I bought a set years ago when I purchased my '96 Toyota Camry. Prior to that, I used a #1 or #2 U.S. Phillips screwdriver on them, but realized they didn't quite fit correctly. Of course, though, you use whatever you have on hand at the time. My Megadora set has a P00x75mm, P0x75mm, P1x75mm (910 series), plus a P1x75mm, P2x100mm and P2x150mm (900 series). This set has the blue and black handles. I've forgotten just where I bought them, but they were probably ordered from Amazon. I don't have any stubbies, nor any of the flat-blade (slotted) screwdrivers, either. These are comfortable to use and fit well; worth what you pay for them. The Hozans look to be a nice set, too.
@MarkFox
4 жыл бұрын
If You're in the USA Vessel tools can also be purchased from www.vesseltools.com/ I've ordered many Vessel products from them you can't find on Amazon and they have even special ordered Some Veesel and 3 Peaks tools for me. The Hozans are made by Vessel as well, they just don't have the colored handles like Vessel. The Megadoras are my favorite Vessel types and well worth the money spent on them.
@FreedomExperiment
6 жыл бұрын
A lot of these can be purchased through Amazon Japan for a discount. I purchased the Engineer brand pliers pz-59(linesman) and pz-60(needle nose) for $48 US, delivered from Japan in two days DHL. The pz-59 vamplier equivalent is at least 40$ in the US. That red handle and cool branding is very expensive apparently, but the green handle works just fine for me, at nearly half the price.
@holton345
5 жыл бұрын
I could have written this post. My experience, exactly. Go with the green handled Engineer pliers and Amazon Japan.
@F16_viper_pilot
Жыл бұрын
The ISO 8764-1 is now being used instead of the JIS B 4633, but the two standards are very close. Vessel, who basically is the longest standing manufacturer of JIS screwdrivers in Japan, makes screwdrivers that fit those two standards and also work properly in Phillips screws. The confusion is that now many screwdrivers from Japan, including Vessel, are not necessarily labeled as JIS screwdrivers, but are still the appropriate drivers to use. In a nutshell, look for Japanese screwdrivers over Phillips screwdrivers, as they are much better for all cross type screws. I only keep Phillips screwdrivers as my disposable beaters and only use them if I am relatively confident they won’t cam out for the piece I’m working on. They’re the ones to hand to the kids, where you don’t care if they are lost or destroyed.
@djosbun
4 жыл бұрын
Excellent video! Love the detail you showed. I just ordered my first Vessel 930 size 2 after getting frustrated replacing an ignition control module in a 1997 Honda CRV. I love my Felo and old Craftsman Professional (USA) and am looking forward to using the Vessel 930 Megadora.
@MarkFox
4 жыл бұрын
The Megadora's are my favorite style for sure.
@jameshanoomansing1442
5 жыл бұрын
excellent review...those vampires will be on my shopping list
@MarkFox
5 жыл бұрын
Thanks for watching!
@firebladex8586
2 жыл бұрын
Not just wide format, but all the Japanese copier/multifunction printers use JIS.
@mdlee52
6 жыл бұрын
Great video, Mark. That's quite the collection.
@MarkFox
6 жыл бұрын
Thank you Mr Lee, they really are nice screwdrivers!
@Planeta-Shelezyaka
8 ай бұрын
Благодарю за отличное видео!
@MarkFox
8 ай бұрын
Thanks for watching and commenting!
@johngibson3594
6 жыл бұрын
Great vid mark I have a Jim driver now all because of your vids and it’s a vessel gel grip they are very nice tools.
@MarkFox
6 жыл бұрын
I love Vessel tools, haven't run across a dud yet.
@ashrafkhokhar8834
2 жыл бұрын
Excellent video
@MarkFox
2 жыл бұрын
Thanks for watching and commenting!
@jeffreycaban5107
2 жыл бұрын
Mark, Nice collection of Vessel JIS screwdrivers. I am adding to my collection as I currently have both the ratcheting screwdriver as well as the ball style screwdriver. I recently placed an order with JDV and was looking for a complete set of the 4500 Power Grip screwdrivers but they are not listed on their site currently. might have to go another route.
@MarkFox
2 жыл бұрын
Lately I've been buying the powergrip models as singles on Amazon. If Vessel ever offered them as a set I've never seen them.
@maycatzhengda.6420
5 жыл бұрын
Good brand,hight quality.
@MarkFox
5 жыл бұрын
My favorite screwdriver brand by far! Thanks for watching and commenting.
@ranacherian
2 жыл бұрын
The mini screwdriver at 10 45, is it made in japan? Amazon doesnt specify where it is made.
@MarkFox
2 жыл бұрын
Yes, mine is clearly marked "Made in Japan" I have owned it 7 or 8 years so things could have changed since then.
@davidstacer
2 жыл бұрын
At 10:38 in the video you hold say "here are the little mini's" I just bought those from Amazon and they are not JIS. Can you check yours in the laptop screws? I'm wondering if they changed them, but the ones I got, don't fit the laptop screws. I have another bit set from Vessel that fit perfectly.
@MarkFox
2 жыл бұрын
I just tried them in my Samsung laptop and they fit perfectly, maybe they did get changed over the past few years.
@jW-xz7sr
5 жыл бұрын
Pretty sure I own a snap on JIS but socket. Maybe I should paint it because I seem to use it by accident every So often. Pretty sure my fellow work mechanics don’t even know what JIS is. Heck I darn near forgot. Thanks.
@big_mike_nyc
5 жыл бұрын
I love this channel now I realize you must work on motorcycles etc.. I was always stripping the float bowl screws on my keihin carbs with a regular philips.. what type of JIS driver would you recommend for the keihin carb screws ?
@MarkFox
5 жыл бұрын
This is always my recommended set for your first JIS drivers www.vesseltools.com/handtools/screwdrivers/motorcycle This is the USA Vessel distributor, they have them in stock and ship fast.
@gregblau8082
4 жыл бұрын
Great video as always Mark. I'm looking mainly for a #1 for ignition switches and such. Might get a set if it's a good deal. I really like the blue one that you grabbed a couple times. Also thinking a ball handle might be good in tight spaces. How do the 2 compare?
@MarkFox
4 жыл бұрын
I like the Megadora (blue handle models) best but it just depends on what fits your own hand the best.
@VishalJoshi-sk8ll
3 жыл бұрын
Dis should be Taught/Trained in Schools...
@MarkFox
3 жыл бұрын
Agreed!
@danielch6662
4 жыл бұрын
I don't understand. Japan is no longer using JIS screws? What standard are they switching to?
@MarkFox
4 жыл бұрын
Japan is very much still using JIS screws, purchase any brand new Japanese manufactured motorcycle, large format printer (Roland brand) or vehicle manufactured in Japan in 2020 and you will see JIS screws.
@Flockingtheherd
3 жыл бұрын
Which stubby ratchet do you like better actually.. I see you have the blue version and clear version?
@MarkFox
3 жыл бұрын
The clear model is a ratcheting type, the blue one is the Megadora. I would use the Megadora model is most cases.
@threesons270
5 жыл бұрын
Great video. If you put your hand behind the screw the camera should focus on that and not blur out the fastener
@MarkFox
5 жыл бұрын
It's just the cheap kit lens that came with that camera, has no macro capability.
@jeffreycaban5107
2 жыл бұрын
Wanted to ask if the handle material/feel is the same between the Megadora and the Impacta?
@MarkFox
2 жыл бұрын
Yes, they just have different colors between the two.
@Flockingtheherd
3 жыл бұрын
How much did you pay for your 820fx vessel stubby ratchet driver? I’ve found them on eBay for like 150 bucks :(
@MarkFox
3 жыл бұрын
The majority of my Vessel tools come from here www.vesseltools.com/handtools/screwdrivers/screwdriver-sets
@AGfrom83
Жыл бұрын
Wait is there JIS flatheads?
@MarkFox
Жыл бұрын
No flathead JIS, they just come with the Vessel kits.
@ilildragon
4 жыл бұрын
Hello Mark, will these JIS screwdrivers work on phillips screws, or will they strip the phillips head? Thank you.
@MarkFox
4 жыл бұрын
They will also work great on Phillips head screws
@ilildragon
4 жыл бұрын
@@MarkFox , Thank you so much for the reply, much appreciate it.
@martingalvez503
5 жыл бұрын
I appreciate your video it’s help me a lot to decide for which one screwdriver i can buy.
@MarkFox
5 жыл бұрын
Thanks for watching and commenting!
@nickshowsstuff435
4 жыл бұрын
Turns out vessel makes impact screwdrivers for craftsman believe it or not. Look it up if you don’t believe me.
@MarkFox
4 жыл бұрын
Yes it is widely known Vessel makes the Craftsman 2 piece impact screwdriver set.
@nickshowsstuff435
4 жыл бұрын
Mark Fox is the craftsmen jis also?
@MarkFox
4 жыл бұрын
I'm not sure if they are JIS or not, hasn't been a Sears around my area in a long time so I've never been able to look at them in person.
@cuongly523
4 жыл бұрын
Hi. Should I the get Vessel or Hozan brand?
@MarkFox
4 жыл бұрын
The Hozans are a good buy at $20 but I do prefer the Vessel handles. That is my personal preference though and the Hozans might feel great to you.
@fazehasoon5559
3 жыл бұрын
Hey, so how would you use the Vampliers to take out the stripped head?
@MarkFox
3 жыл бұрын
Just grab onto the head of the screw with the tip of the pliers and go to town, it has worked every time for me.
Пікірлер: 75