Lynn Rodak, Davenport Florida, I bought my Juki 150 QVP at the Lakeland Florida Show. I too, like Frank J would like to see a video on bobbin retrieval and winding as well as threading I just started watching your videos and love your voice and teaching abilities on this machine.
@tinab9542
5 жыл бұрын
Hi! I bought this machine not long ago. Still learning it. Please make more videos on it! What I can do on this machine I love love this baby!!
@Curlygaga
4 жыл бұрын
I have had my machine for about a year. It is not like anything I have ever sewn on before. I absolutely love it. Free motion is just a joy, it almost creates the design for you!!. One thing I might suggest, My local dealer in town (where I got the machine) is having a Juki rep coming into the store to give hints, suggestions and apparently some unknown available stitches for this machine. I am looking forward to this. You might suggest if this is possible in your town. Have fun...
@notesfromleisa-land
2 жыл бұрын
One selecting a 12" throat would never expect to travel with it! My domestic has a whopping 7.5" and it is a pain for larger quilts. A 12" space is something that I'm considering for the sheer convenience coupled with the quilt suspension system that my I devised. I have a Juki coverstitch and my original Bernette Serger from the 90's still works flawlessly and was made for them by Juki. I have a Bernina 910 (whopping 7 stitches) and B 530. The B's are too high of a price point--and my 530 I got significantly reduced on closeout (cheap that I am.). The Juki HXL-NX7 can be had affordably as they are earlier generation. There is just so little about these Juki's. I believe, as you do, that they are under-rated, for price + performance. But there are not so many (such as you) lauding the benefits of these machines.
@sandraengstrand2784
5 жыл бұрын
Looks like a gorgeous machine!
@ylbubbix7
4 жыл бұрын
I have had this machine for 2 years and it has been a real lemon. I have had nothing but problems with it. It didn't come with the proper tools to open the screws and the bobbin is so difficult to put in. The thread constantly breaks. When it works it sews beautifully ...but those times are few and far between.
@matthewporachan1313
2 жыл бұрын
I have to agree. I’m so disappointed in mine. The Manuel is useless and I can’t seem to get any answers on tension settings. Just seems like a lot of money to spend on a machine and not really be able to enjoy it. I did research for over a year and thought I found the best option for my needs…….I truly regret not going with the Bernina 770QE
@ylbubbix7
2 жыл бұрын
@@matthewporachan1313 since writing my comment I found by using a size 18 needle, all my problems are solved. I hope it works for you too.
@imsingin4jesus2
2 жыл бұрын
I just got my new machine and a not sure which loops to place the thread? I’ve never had a big machine like this before
@jacklyntrierweiler6084
Жыл бұрын
Can this machine sew vinyl and thin leather?
@VijayPatel-zo6oj
3 жыл бұрын
Good machine
@imsingin4jesus2
8 ай бұрын
I’ve had mine for over a year and feel like I barely know it. How do you switch from reg sewing to free motion without turning the machine off
@kennawaterman7870
6 ай бұрын
I’m looking for an answer to this also. It gets frustrating having to turn the machine off and back on to adjust stitch length, tension, etc. The only time this isn’t a problem is if the thread cutter is being used. Cutting the thread resets the machine and adjustments can be made. If thicker threads are used the thread cutter cant be.
@minuteman8017
3 жыл бұрын
I bought one yesterday we are setting it up this weekend pretty excited. Can you tell me if this is a high shank presser foot?
@TheHawkeyeQuilter
4 жыл бұрын
Omgosh, it's so quiet compared to the 8700!
@terrigraham3147
5 жыл бұрын
I have the J-150 and love it. I have had trouble with the cutter. It seems to cut the bobbin thread too short so when I start to sew the next seam it won’t stitch. Do you know what setting I may have changed or what I can do that will fix this?
@Nk-qk9rm
5 жыл бұрын
I searched in Sewingmachine.com, there is no j150 qvp in there
@StringandStory
5 жыл бұрын
Hi NK! Yes, at this time this machine is not listed on the website. I encourage you to contact them via phone or email for more information!
@shannonmabry5420
3 жыл бұрын
does that Juki J-150QVP included the wheels?
@matthewporachan1313
2 жыл бұрын
I have this machine and LOVE it! I can’t find a happy tension for 50 wt cotton thread for FMQ. What do you have yours set at? Oh, and for straight stitch too?
@StringandStory
2 жыл бұрын
Make sure you set your bobbin tension for the J150-- if it's too high or too low, that will make it hard to get the whole thing balanced. I have a tutorial here: kzitem.info/news/bejne/ymqotKBroGeaY3o
@VijayPatel-zo6oj
3 жыл бұрын
Needle sizes
@jojorey6886
4 жыл бұрын
I just purchased this machine it’s very nice. I’m trying to FM a quilt, which I’m not new to, but I’m having trouble with the thread breaking, the thread thins out from friction, thins out then breaks. I’ve tried everything I can think of, changing needle (manual says use #18 needle). Decreased tension but I need more tension to get a proper stitch. I’m using Aurifil 50wt. I used the machine for ten minutes then I got an error message saying Overload of Motor. Can’t be right, I barely used it. Do you have any suggestions as to what the problem might be?
@StringandStory
4 жыл бұрын
Hey JoJo! Two quick thoughts: is your oil reservoir full? Have you tried lowering your presser foot a bit to reduce the pull that way? Beyond that, I would call your dealer ASAP because that doesn't sound a like a normal issue at all
@jojorey6886
4 жыл бұрын
HollyAnne Knight at String & Story thank you for responding. The oil is fine. I did lower the foot, it was a little high. I also ever slightly turned the needle counter clockwise, I thought maybe it was a little off and caused friction on the thread. It improved the problem. My dealer said, I needed to change the feed dog locus to box....the feed dogs drop so how is that supposed to help. She told me to watch JukiJunkies’ video on machine settings for FMQ on the J-150 and that’s what they said. Change the feed locus to box in the sewing mode then switch to FMQ mode. That doesn’t make sense because they are two different modes with two different settings apart from each other. I thought it might be the thread. Do you use Aurifil 50/wt? If that error message pops up again I will contact them. You probably have better dealers in your area than I do where I live.
@jojorey6886
4 жыл бұрын
HollyAnne Knight at String & Story one more thing. The manual says to use size 18 needle when FMQ. (I think that’s too big). What size do you use?
@daniellebedotto7688
4 жыл бұрын
I have the ddl 9000c. It has the same interface but I'm struggling with my thread splitting above the needle. I've tried everything, all threads, cleaned machine, new needle, etc.... This is a new problem over the last 6 months. Can you please share what settings you are using for fmq?
@StringandStory
4 жыл бұрын
Hi Danielle! It sounds like your foot is too high. Have you tried increasing the presser foot pressure?
@daniellebedotto7688
4 жыл бұрын
@@StringandStory yes.... Can you please share the settings you are using for free motion? Thanks
@debjive
4 жыл бұрын
Where can you purchase this machine in uk?
@bbbdco
5 жыл бұрын
I have tried this machine at my local dealer and it sews and quilts beautifully. My one reservation is that I cannot find a way to change any of the settings while I’m actually sewing. For example, If I am piecing at 2.5 mm, and decide I want to change that to 2 mm, it is not possible. You must either exit by cutting the thread, or turn the machine off and on again. All other machines today allow you to change stitches on the fly. My dealer also cannot find a way to do this. Are you aware of this issue? If this is a problem, Juki needs to upgrade the software to correct this. Or is there a way around this that I am not aware of? Any feedback would be appreciated.
@reneekrupp2333
4 жыл бұрын
I have the same problem ..... I’ve looked everywhere I know of for a solution. I WOULD LOVE TO KNOW THE ANSWER !
@oosterkamps
4 жыл бұрын
Strengthmedia1 hit the thread cutter first. Then you can get in to change settings.
@rebeccahempe5144
2 жыл бұрын
There is apparently no way around this. One flaw about this machine.
@frankjanvari8650
5 жыл бұрын
hello very beautiful juki sewing machine does it have a servo motor or clutch motor please kindly film how to thread and wind the bobbin and how to operate the sewing machine foot pedal how its used please kindly film ok ?please kindly reply back ok?thank you very much
@StringandStory
5 жыл бұрын
Hi Frank! I'm not sure which motor off the top of my head, but I recommend calling SewingMachine.com to find out. Yes, I'm planning to film more tutorials for this machine.
@gmukesh1979
4 жыл бұрын
price
@rsplatt100
5 жыл бұрын
I see the Duluth sign in the back. Is that Duluth Mn? Sara
Пікірлер: 41