DJ and Ant should have a show where they solve mysteries around the shop
@randyd9414
3 жыл бұрын
its called djnoway
@mikeenz8
3 жыл бұрын
@@randyd9414 damn straight
@holdenweese9589
3 жыл бұрын
Scooby an shaggy type shit
@dannyr3346
3 жыл бұрын
Akebono 300z brakes for the win!!
@emryssuddarth4947
3 жыл бұрын
This week DJ and Ant try to figure out who ate all the snacks.
@TheBurton147
3 жыл бұрын
Jimmy and Taylor ray are two of the most informative/knowledgeable non mechanic mechanics we all have the pleasure of watching. Thanks for the quality videos Jim!
@TheCoddfather
3 жыл бұрын
"Grinder and paint makes me the welder I ain't" - BHall - some vid a while back 🤣
@Austinadcock
3 жыл бұрын
Lol I heard that from a KZitemr called AvE first but it’s a great phrase!
@TheCoddfather
3 жыл бұрын
@@Austinadcock It may well have been from Uncle Bumblefuck also!
@snoopy5736
3 жыл бұрын
Thats an old saying guy
@stevengarland895
3 жыл бұрын
I was gonna say the same thing. I tell that to all the wanna be welders that come on my jobs.
@jacob_rozar
3 жыл бұрын
You must not work on cars, lol. That saying is older than all these guys.
@ginseng.7888
3 жыл бұрын
Yup, dropped EVERYTHING I was doing to watch this. Gotta know your priorities people ! :)
@azhomeimprovement5661
3 жыл бұрын
Heck yeah
@bigfootgarage2201
3 жыл бұрын
So did I
@thedetailbooth4070
3 жыл бұрын
Same
@minor7607
3 жыл бұрын
True
@colin6898
3 жыл бұрын
🙌🏼
@Azewzew
3 жыл бұрын
Johnny teaching Ant damn near had me crying, so cute
@seanharrison6162
3 жыл бұрын
2:27 the look of realization immediately followed by disappointment in rj
@Nadhedge
3 жыл бұрын
I thought it was Sammy 😥
@zector0
3 жыл бұрын
The coin dropped, but he was buffering for a moment.
@phenoxs
3 жыл бұрын
Really hate when the vid ends, we need hour long episodes lol. Best channel on KZitem, coming from a mechanical Engineer major.
@QuesoDipp
3 жыл бұрын
Those T3 LCAs are super nice tbh, really good piece of kit.
@LonTierney
3 жыл бұрын
The T3 hating is a bit much...
@QuesoDipp
3 жыл бұрын
@@LonTierney Just seems to me like people who have read stuff and can regurgitate it, but don't fully understand why you would want extended/beefy arms. It happens, I'm not sweating it too much lol.
@Tanner731
3 жыл бұрын
those arms cost more than it would to make 3 sets of stock extended ones, t3 makes nice stuff but for an s-chassis all you really need is extended LCA and cut knuckles
@QuesoDipp
3 жыл бұрын
@@Tanner731 agreed, and some maxima or aftermarket tie rods. Perfect simple steering setup.
@Tanner731
3 жыл бұрын
@@QuesoDipp jimmy should get some good money selling them at least, im sure someone wants them for a track car so they can mess with the swaybar stuff on them
@alicastro6262
3 жыл бұрын
Words of wisdom from Jimmy to Adam LZ 15:30 🤣🤣🤣🤣
@anthonymontilla4807
3 жыл бұрын
@@connormcclain907 I think he has 32
@anthonymontilla4807
3 жыл бұрын
@@connormcclain907 that was the number we counted when he posted the Instagram picture of all his wheels but he just bought another set and people are saying that he has more hidden so it’s probably 40
@chokztogoo
3 жыл бұрын
Anthony Montilla damn 40’s
@jonerickson5469
3 жыл бұрын
Yo lemme get those old LCAs, I’ll pay for them!
@antoinele6305
3 жыл бұрын
bump!
@markschaff9503
3 жыл бұрын
Techno Toy Tuning are THE parts to have in the datsun world haha seeing you take them off was insane, but I totally understand why! Nice work Jimmy!
@andricodewet3725
3 жыл бұрын
The notification sound didn't even stop playing before the video was opened! And the like followed just as snappy!! Much Love from South Africa!!
@IAustin247
3 жыл бұрын
Loved hearing DJ giggle like a school girl when they stole the calipers lmao. What a heist
@elfalcon666
3 жыл бұрын
Gotta love the good old swiss cheese lower control arms 😂😂
@EnglishCat315
3 жыл бұрын
Watching Jimmy fab is oddly satisfying
@Bmxthegardennj
3 жыл бұрын
Watching Jimmy alone is just oddly satisfying 😌 🎅
@brock83196831
3 жыл бұрын
@@Bmxthegardennj that sounds a lil weird
@hoppy1028
3 жыл бұрын
I do as well, you would love Taylor Ray’s channel then. He fabs 9/10 times he needs something. Both are crazy talented
@EnglishCat315
3 жыл бұрын
@@brock83196831 agreed.. Little sus 😂
@parkd240
3 жыл бұрын
the ball joint part and the music had me grooving. felt like a movie scene
@ReuvendaCamara
3 жыл бұрын
Those lower arm control are technotoytuning lower arms. there amazing
@ClimptonDiddlehopper
3 жыл бұрын
They're
@josemquirozjr4929
3 жыл бұрын
Them techno control arms! I love mine
@snoisulli
3 жыл бұрын
They really did to throw them in the trash as if they were some cheap brand too😭
@josemquirozjr4929
3 жыл бұрын
@@snoisulli Fr...they’re beefy and good quality smh...never have had a problem with them, and I use them for drifting
@OkayJayy_
3 жыл бұрын
Jimmy is the king of engine swaps
@Casey_Jones_
3 жыл бұрын
yo that lower control arm is Techno Toy Tuning, T3. That is one of the best lower control arms you can get lol, they are the Premier company for anything Vintage Datsun Nissan performance parts. Do not get rid of the control arms, use them on the S15 or sell them to one of the S14 drifting homies.
@austinstuart298
3 жыл бұрын
Those are techno toy tuning lca's. 25 mm longer I believe. I ran them on my s14. Solid pieces
@fattynuts2463
3 жыл бұрын
Hey jimmy please get a front gate for the parts shop front door , just that glass won’t do anything so a robber
@macman113
3 жыл бұрын
T3 is actually a great company that supports a lot of older JDM cars
@tun1034
3 жыл бұрын
Jimmy O after work, with dinner......👌🏿
@rsadz2358
3 жыл бұрын
always Great to see a upload from Jimmy and the gang
@lylebarin4317
3 жыл бұрын
Jimmy oakes- new project car - never get finish!
@midnightg3593
3 жыл бұрын
Rockauto is always my go to for lower control arms
@fallenbullseye
3 жыл бұрын
FINALLY, A JIMMY OAKES VID
@YotaguyJosh
3 жыл бұрын
Correct me if I’m wrong but I’m pretty sure the Z32 and R33/4 FLCA’s are the same as the S14. For future reference.
@DaniloIvancevic
3 жыл бұрын
This guy just always makes my day! 🤗Love ya, Jimmy!
@charliesanders6596
3 жыл бұрын
Adam LZ and jimmy out here with the Blitz 03 game. Adam just flexed on everyone with his 24+ sets of them
@igameincolor4597
3 жыл бұрын
Damn wedding in Florida congrats Adam
@NWRuss
3 жыл бұрын
Jimmy..... I need a RWD Civic update man...
@MrRoven009
3 жыл бұрын
Second this
@xxShadowxx-dy2wo
3 жыл бұрын
I woke up from a dead sleep for this and that brake heist was so worth every second awake for this video. Excited for more kouki content!!!
@zerohourdrift
3 жыл бұрын
Maaaaannn those arms and spacers are for a reason lol. Techno toy tuning arms are baller. and the spacers are supposed to help with the scrub radius and stuff with angle stuff. Supposed to be better than a full on upgraded lca like wisefab and stuff. People like naoki, yashio, etc all run stockish arms with big spacers
@Azarathal
3 жыл бұрын
They all run fully stock arms with big spacers as it helps, on a twin arm like a Skyline extended can help but on Schassis it ruins the feel
@snoisulli
3 жыл бұрын
At the JimmyO Garage they don't believe in race cars, they bag on tubed front ends all the time haha
@zerohourdrift
3 жыл бұрын
@@snoisulli it doesn’t have to have a tube front to be a race car... and they don’t dick on em lol they just don’t personally have any because it’s easier and simpler to keep a stock core support lmao. You don’t see jimmy telling Adam his s15 is trash lol
@snoisulli
3 жыл бұрын
@@zerohourdrift have you seen any of the E30 videos after the incident? He hates them and says they ruin cars and are "tacky"...
@jimshort6576
3 жыл бұрын
Lunch brake and JimmyO? Cant get better than that! Love all you guys stay safe! Yalls videos are the highlight of my day, always laugh and learn something new.
@chrissharples8027
3 жыл бұрын
Gotta love techno toy tuning control arms
@ctco223
3 жыл бұрын
Lower control arms are techno toy tuning extended for those inquiring minds.
@t2iskyler
3 жыл бұрын
Less wire speed on the welds. Favour the thicker strip of the metal and whip it to the thinner metal when doing those. I always recommend doin a test chunk of scrap the same thickness before going straight to the part. Dial settings there so your not grinding off and doing it again.
@lachlanstewart-tonkin2180
3 жыл бұрын
I was actually keen on the green
@zector0
3 жыл бұрын
Don't feel pressured, there should be no tension. Be one with the force.
@ScooterswanttheD
3 жыл бұрын
i have an S14 and recently discovered LCas are a pain in the ass to get your hands on
@jamesamato9419
3 жыл бұрын
Makes my lunch breaks better when I see he uploaded a video🤘🏼
@nickg4135
3 жыл бұрын
take a shot every time jimmy says boom
@chancebrittin8928
3 жыл бұрын
I feel you dj I don’t trust presses either, to much pressure.
@themikeyfrisco
3 жыл бұрын
Anyone else find that “BING BING BING BONG” ball joint pop as satisfying as I did...?
@franklinsantos3587
3 жыл бұрын
Yes!! Lunch break upload!! Thank you Jimmy.
@EndroEndro
3 жыл бұрын
Ah, nice fresh green color you use there :)
@TAT760
3 жыл бұрын
Christmas vibes! 👍
@pbb547
3 жыл бұрын
A grinder and paint makes me the welder I ain’t 😂 love it
@KellenS128
3 жыл бұрын
I kept wondering why it was a problem to be over built... then ya made perfect sense.
@austinh1028
3 жыл бұрын
If you're up north, Dust shields only exist to catch rocks and rot away
@Chocolate_dragon
3 жыл бұрын
I didnt know Brian was on Grinder. You do you man!
@aceburgers8801
3 жыл бұрын
I did it all for the kouki, the kouki
@kanethomo2483
3 жыл бұрын
11:40 how Ant gets all his car parts lol
@asutton179
3 жыл бұрын
The red and green remind me of the Volkswagen from forever ago
@sukeetoboodo
3 жыл бұрын
always catching a fresh upload on the refresh
@JAGZBUILT
3 жыл бұрын
Jimmy and the squad are the friends I never had 🥺
@Turtlewang75
3 жыл бұрын
Green and red just like the OG Volkswagen
@calambres6614
3 жыл бұрын
Not going to lie im glad you changed your mind on the honda powered s15. Throw that shit in to a basic ass s14 the s15 deserves better
@ben_rps1341
3 жыл бұрын
S14 LCAs are only about 7-8mm longer than s13, the increase the overall track width 15mm, so the 15mm each sides probably gonna be better than original s14 LCAs anyway
@2k12Chris
3 жыл бұрын
Damn. Feels like yesterday that I watched the video of you extending the low arms on the coupe.
@JB-qy1gx
3 жыл бұрын
The aftermarket lca's are techno toys tuning and they're actually really good quality.
@alejandroguillen1159
3 жыл бұрын
Ants a dope addition to the team lol good sht homie, if you don’t know about cars you’ll deff learn something during those short explanations
@antonrouse2731
3 жыл бұрын
That skid factory reference was classic !
@jordangarneau8817
3 жыл бұрын
Pressing the new ball joint in like that can dent the joints cup and cause premature failure.
@Skirasa
3 жыл бұрын
Jimmy could put windshield wipers on a car and it would “transform the car” / “look amazing” / “absolutely in love with it”
@JamesSmith-nd5kr
3 жыл бұрын
People reinforce extended lower control arms because if it fails at speed you could die.
@jayraymars
3 жыл бұрын
I just need to know what’s good with you turkeys everything I open KZitem. Missed y’a bud
@jayraymars
3 жыл бұрын
Every time lol
@BenjySparky
3 жыл бұрын
Jimmy and gang y'all rock! I'm here for the algorithm! Peace easy and get that v!
@fezcarstuff5851
3 жыл бұрын
Sorry wrench every day Jimbo posted
@krisstofffrontin8994
3 жыл бұрын
Still miss the Wilwoods
@tuss4
3 жыл бұрын
Those old control arms were meaty!
@gg2xrivers207
3 жыл бұрын
That’s crazy I’m going to Florida on the 2end
@kellytaylor3134
3 жыл бұрын
Jim needs to do a track build
@terrypickette118
3 жыл бұрын
Happy Birthday Elvira
@DELirious97
3 жыл бұрын
Grinder and pain make you the welder you ain't
@PsyduckSWAG
3 жыл бұрын
Give us a "Guuuuuudbye" shirt or we riot jimmy
@mathesonbw108
3 жыл бұрын
red and green, tb to the Jetta with the Kelly green plastidipped wheels lmao
@mathesonbw108
3 жыл бұрын
as seen in one of lzs first webisodes
@zachhalverson1450
3 жыл бұрын
Isn’t t3 Techno toy tuning? Always thought that was ae86 stuff. Keep up the good work Jimbo!
@danielhunter2254
3 жыл бұрын
They make a lot of stuff for datsuns, AE86, 240’s and a lot of older car that are hard to find parts for. Very good quality stuff I had a bunch of parts on my AE86!
@TheRelaxingAvenue
3 жыл бұрын
those are techno toy tuning lca probably really expensive ahah
@nathanbennett9025
3 жыл бұрын
LMAO THE GTA MISSON 💀 🤣 😂
@iamnobody3793
3 жыл бұрын
Shamefully raises hand. Did mine upside down once. Never again.
@nikkyng8141
3 жыл бұрын
t3 is actually a good company
@goldenratio183
3 жыл бұрын
Dj an ant doing naughty things is too funny
@motive1723
3 жыл бұрын
buy a press < buying two more lifts
@alexrin8273
3 жыл бұрын
WHATCHU MEAN JIMMY TECHNO TOY RACING LCAS ARE SICK match them with some modded knuckles and mad angle
@jrodjeremyflanigan7935
3 жыл бұрын
Looks good!!!
@mattyoung2880
3 жыл бұрын
The hydraulic press channel is DJs nightmare lmao
@timzagarella8230
3 жыл бұрын
Jimmy Fab Oakes over here
@LiquidSquidYT
3 жыл бұрын
Jimbo with the welds?!? sheeeeeeeeesh
@zzZZZempahz
3 жыл бұрын
Ayee if yall ever get bored or something I have an e36 vert in need of a ls swap 🤣🤣🤣Love the videos keep it up
@dariososa3799
2 жыл бұрын
The side mission 😂
@GutZ_47
3 жыл бұрын
bro, t3 is lightweight legendary in the game, yall did their products wrong man. couldve been a great business partnership too lol
@bryanmcguire6274
3 жыл бұрын
Why don't you use the four post lift that you have for your Dyno setup
@Jayburney325
3 жыл бұрын
no guard jimmy back at it again
@LMSCa18det
3 жыл бұрын
1:40 Or go Nismo on lower control arm, they still make them either for S13, S14 or S15 :)
@jeremygonzales9478
3 жыл бұрын
Those lower control arms are from technotoytuning.
Пікірлер: 295