It should be a NZTA requirement that all cars idle like that
@smellslikeahh
4 жыл бұрын
damn♥️ what engine mounts are you using?
@nadizahadi1183
Жыл бұрын
How did you do the cam/crank timing? U followed like stock one said at the manual book?
@ManatoreCZ
12 жыл бұрын
got your idle a little low, but it has an awesome sound :) good job man!
@coreyvicary
13 жыл бұрын
air leak fixxed now runs heaps better more responsive
@coreyvicary
10 жыл бұрын
Sorry Gabriel cant buy a cam for it have to have it re ground to be like that. I dont have the specs on it either had it done so long ago sorry. as for the other questions i didnt reply to I dont have the car in the same state any more and havent driven in 2 years so not sure of all the details now. hope to move back home at some stage and get it out on the road again. Maybe do a conversion.
@StuartBermingham
9 жыл бұрын
How do you put the new cam in? Do you have to lift the engine out or can you just slide it in if you remove the grill?
@coreyvicary
9 жыл бұрын
Hey mate yeah I had the engine out to do it. you would have to remove the grill and radiator at least to get it out. Also if you do that dont let the cam followers fall into your sump when you pull the cam out or you will be taking the motor out anyway.
@bgrushbr
7 жыл бұрын
she run's mate great to see and here
@George-MCX10R
9 ай бұрын
Deadass sounds like a lawn mower
@blackkijang3309
5 жыл бұрын
Great sounds
@Qay1996
4 ай бұрын
when you installing the cam are following the crank timing mark based on factory manual or how? im just wondering how you adjust the timing, retard or advance. btw sick build you have there 🔥
@coreyvicary
4 ай бұрын
Yeah it was all put in as factory settings still adjust timing with distributor and it's driven off the cam
@CptAwesomeYo
7 жыл бұрын
Cammed as fuck, loving it! Haha definitely reminds me of my first startup in my 3K after building it, check out the vids of it on my channel :)
@gabrielpagliaro1834
10 жыл бұрын
hello where can i buy a cam for that engine=?
@AEnythingWerks
12 жыл бұрын
mind sharing the size of the jetting you're using ? thankyou
@mickbyers07
12 жыл бұрын
what cam are you using and where did you get it?
@milkmane7838
5 жыл бұрын
Auto and manual starter motor the same?
@coreyvicary
5 жыл бұрын
Sure are
@milkmane7838
5 жыл бұрын
Hmm every time I look for one they say on eBay manual starter motors won't go in auto
@milkmane7838
5 жыл бұрын
Auto one are expensive as
@coreyvicary
5 жыл бұрын
Just get one from wreckers they are cheap. Maybe they are different but thiught they were the same
@milkmane7838
5 жыл бұрын
Cheers
@december3rd1990
11 жыл бұрын
mate how much is it to get the cam install and where??
@griggsyxx1
12 жыл бұрын
I ran the same carb on my 120hp 3k only difference is mine had a 50hp wet nos base plate under it that push it passed 120 hp
@Membangunindonesiaid
3 жыл бұрын
That quite big power for 1.3litre engine
@amerulwahid
10 жыл бұрын
insane
@rollercuz
11 жыл бұрын
Can't tell if cam or just shit timing and idle
@azwan_cool
7 жыл бұрын
kenapa bunyi macam traktor bajak sawah? 😰
@lenzehonk426
5 жыл бұрын
Hahahahaha i used google translate and the result were funny!🤣🤣🤣
Пікірлер: 36