I appreciate you. My board came with nothing on it, and this helped me get it up and running!
@ChrisRiley
7 ай бұрын
That's great! Thanks for watching
@COYOTH
11 ай бұрын
great video! now do what everyone else can't with this board! connect canbus without host usb bridge cable on mcu!
@ChrisRiley
11 ай бұрын
Thank you! I need to get into CAN, I will see what I can do. ;)
@z28z34man
11 ай бұрын
I would love to see that myself as I just purchased an ebb 36 to use with my makerbase mks skiper
@joeldriver381
11 ай бұрын
Yeah, my head hurt when up updated my Mellow Fly Gemini. Excellent info!
@ChrisRiley
11 ай бұрын
Glad it helped!
@martinverbaas
10 ай бұрын
You are my go to men! You rock
@ChrisRiley
10 ай бұрын
Thanks!
@FactPulse-f4k
11 ай бұрын
Thanks chris ❤
@ChrisRiley
11 ай бұрын
Thanks for watching!
@vanlife4256
6 ай бұрын
Chris, you are doing an exeptional job of explain to us this challenging subject! Thank you!
@ChrisRiley
6 ай бұрын
Happy to help! Thanks for watching
@Rok_Satanas
3 ай бұрын
2:30 "...It's not very easy actually get these plugged in wrong..." 2:48 procceds to plug them wrong... I laughed way too hard at this
@ChrisRiley
3 ай бұрын
I'm skilled.
@Anycubic_Kobra_2_Max
Ай бұрын
say can't driver put in wrong and press the driver at 2:44 wrong in the socket
@ChrisRiley
Ай бұрын
Yep, good time!
@helgesverrerisan7938
4 ай бұрын
In really struggeling to make canbus work. I have a EBB36 can connected by the canbus to a skipe but i cant figure out how to make it work. Do you know about it? Can you please have a look at it? Love your yt Clips.
@ChrisRiley
3 ай бұрын
I have made it work, but it's not always easy. I will see what I can do to make a video on it.
@helgesverrerisan7938
3 ай бұрын
@@ChrisRiley Would have been a saver :) Im completely lost.
@Paulo_Araos
11 ай бұрын
Thanks Chris for your videos, could you talk about the BTT Pi 1.2 and its access to the GPIO to control a Relay? plissssss😅
@ChrisRiley
11 ай бұрын
I'll check it out!
@martinverbaas
10 ай бұрын
Using WinSCP to get the .Bin file is the way to go for any board.
@ChrisRiley
10 ай бұрын
👍🙂
@dukezillo
11 ай бұрын
normaly i copy the klipper.bin to the directory of the config files, so i can download the file on the web interfase
@ChrisRiley
11 ай бұрын
That's what I have been doing lately. I was told about a python command that makes it way easier, it will be in the next video.
@karlohorcicka7388
11 ай бұрын
if you can't find bin file, AVR uses hex so it's okay
@ChrisRiley
11 ай бұрын
Thanks for the tip!
@merlinbk
2 ай бұрын
Where do you plug in the 3/4 pin filament sensor?
@ChrisRiley
2 ай бұрын
It goes in MTDET, the pin is PA13.
@merlinbk
2 ай бұрын
@@ChrisRiley What if its a 4-pin?
@ChrisRiley
2 ай бұрын
@@merlinbk No clue what the forth wire is, what kind of endstop is it?
@merlinbk
2 ай бұрын
@@ChrisRiley So it's actually a 4 pin connector with only 3 wires. Can it be plugged in elsewhere on the board? If not what is the connector called, so I can convert it to 3-pin.
@ChrisRiley
2 ай бұрын
@@merlinbk Yeah, you just need to covert it over to a 3, most endstops are 4 on the switch side, but 3 on the board side, not sure why. These are the ones that fit the board. geni.us/jYAAkk (aff)
@emulator7503
9 ай бұрын
how to get mainsail running on this board?
@ChrisRiley
9 ай бұрын
Here you go. kzitem.info/news/bejne/p6CDwK6NmImHhG0
@aaronnbb7470
10 ай бұрын
Hey , is this the same process for the duet wifi? 😬
@aaronnbb7470
10 ай бұрын
My problem is: i‘m flashing the firmware but the port is not changing… And what about the sd card, is the firmware called „firmware“ or is it „duetwififirmware“ ? Thanks 😄
@ChrisRiley
10 ай бұрын
I've never tried it, in theory, it should work the same, just with a different chip. This is the only walkthrough I have seen. meki.medium.com/adventures-with-klipper-and-a-duet-2-wifi-on-an-flsun-qq-s-pro-f9eec5981cfc
@Tristan-ge1lx
10 ай бұрын
"promo sm"
@ChrisRiley
10 ай бұрын
🙂👍
@PaulFulbright
11 ай бұрын
There was no printer_data folder for me, it was in /home/mks/klipper_config just fyi. Gotta love linux...
@ChrisRiley
11 ай бұрын
Good to know that there could be differences, thanks for posting.
@Teh-Stig
3 ай бұрын
Anyone else struggling to get the MCU to flash. I have a small 2GB FAT formatted SD card, have built according to instructions but it just seems to ignore it altogether, the version is definitely different (factory v0.10.0-530-g3387a9c2-dirty-20220807_204823-mkspi on it, rpi updated fine to v0.12.0-192-gb7f7b8a3)
@ChrisRiley
2 ай бұрын
Some times the board gets confused and won't flash. To try and get back to where it will flash sometime I flash to a version of Marlin or something else, then try Klipper again.
Пікірлер: 50