This came out just after I converted my printers over to Klipper and just after buying a Ender 5 Plus. I saw this board and really wanted to get it for the Ender 5p, but Lucky for me I had an extra Pi to use, BUT I would like to use the Pi for something else and now I am going to after I get these parts and install all this in that Ender 5 plus! I don't need to, but this looks like something fun to follow along with. Glad you are doing this project for and with us!
@ChrisRiley
Жыл бұрын
Awesome, all the videos on this build should be out soon.
@rdyer8764
Жыл бұрын
Hey Chris, I've been watching you on and off for years. I'm so impressed with your increased professionalism and what appears to be your increased intelligence. (Are you secretly an AI?) I don't know if it's just that you're so much better at scripting, filming and editing videos, or that your knowledge-base has grown, or if it's something else, but this was an amazing video! IMO I can always tell a true Master of a topic if when the lesson is over, I feel like doing everything shown would be (with careful consideration) wholly within my grasp. Bingo! Mission accomplished. (Not the George Bush version.)
@ChrisRiley
Жыл бұрын
Thank you so much! LOL!
@thehappyextruder7178
Жыл бұрын
Very good point on distribution changes headache! Awesome video Chris Thanks !
@ChrisRiley
Жыл бұрын
Thanks for watching!
@DJ-Hollandica
Жыл бұрын
nice job chris loud and clear like we know from you keep it up
@ChrisRiley
Жыл бұрын
Thanks 👍
@philippemaertens4052
Жыл бұрын
Great intro to a great board ! Can hardly wait to see the rest of the installation. Thx for all the work.
@ChrisRiley
Жыл бұрын
More to come!
@sunnyzhu169
4 ай бұрын
Bro you just save my life
@ChrisRiley
4 ай бұрын
Happy to help! Thanks for watching
@fgil45
7 ай бұрын
YES; I have ll, adapters emmc, dongle..... GREAT CHRIS! THANK´S by all
@ChrisRiley
7 ай бұрын
Awesome, thanks for watching!
@willngton
Жыл бұрын
Great video as always!!!
@ChrisRiley
Жыл бұрын
Thank you!
@luisillo26
Жыл бұрын
Dude, this video just came straight from the heavens. I’ve been playing around with the new Elegoo Neptune 4 Pro which comes with this mks skipr board. This series will definitely help to customize this printer beyond the official firmware/and configuration.
@ChrisRiley
Жыл бұрын
That's great! I love it when a plan comes together!
@AlForte13
Жыл бұрын
good video Chris!!!! Tom is just a troublemaker(good trouble). Great video very well detailed!!!!
@ChrisRiley
Жыл бұрын
Don't I know it! Thanks
@moimeme7704
11 ай бұрын
Thanks my friend your video help me !
@ChrisRiley
11 ай бұрын
Glad to hear that, thanks for watching!
@vasilvorobets3051
8 ай бұрын
Thank you so much great video i use it to set up my klipper files thanks
@ChrisRiley
8 ай бұрын
Glad it helped!
@anthonyrich1592
Жыл бұрын
I hope there's room on that soap box for a few more of us: distributing custom images on Dropbox/Google Drive/whatever instead of pushing the appropriate changes upstream via PRs is indeed irksome. How long do vendors intend to keep supporting their custom boards... or is the intention to make money now, leave customers in the lurch later?
@ChrisRiley
Жыл бұрын
I hear that, we have to get out of this mode, this won't last.
@joeldriver381
Жыл бұрын
I agree with you! I have been trying to reverse engineer and build Armbian for a Mellow Ffy Gemini v3. Not a good use of my time...
@ChrisRiley
Жыл бұрын
Thank you!
@Mr.Thermistor7228
11 ай бұрын
I'm using fly Gemini v3 too, I don't like being forced to use their image either, also having big trouble with can bus, as are alot of other users
@joeldriver381
11 ай бұрын
@@Mr.Thermistor7228 I have not tried CAN, but everything else has worked.
@Nurgelrot
Жыл бұрын
Holy cow. Amazing video Chris you tackel the Linux install really well... But yeah I think I'll just stick to RRF. Klipper is awesome but too many hoops for too little payoff for me. Keep up the great work. If I do make the switch I'll be rewatching you.
@ChrisRiley
Жыл бұрын
Thank you! Yeah, Klipper's not for everyone.
@onleditpas
Жыл бұрын
board looks interesting, I did not hear you mention a BL Touch connector…. Look forward to the rest of the series.
@ChrisRiley
Жыл бұрын
Stay tuned!
@Teh-Stig
Жыл бұрын
Hoping the future videos will cover drivers (uart vs spi) and sensorless homing? Actually I'm hoping I figure it out without waiting for the video but that's not likely 😂
@ChrisRiley
Жыл бұрын
More to come! Good luck with your projects
@HelgeKeck
Жыл бұрын
Flipper Klipper Yeah!!!!
@ChrisRiley
Жыл бұрын
🙂👍
@danman32
Жыл бұрын
For Windows, you can right-click on the Start menu where you'll find a shortcut to Device Manager
@ChrisRiley
Жыл бұрын
Cool, thanks for the tip!
@Mr.Thermistor7228
11 ай бұрын
Didn't know that either that is sweet thanks
@FactPulse-f4k
Жыл бұрын
Thank you Chris… the board is so low cost with lot of functionalities.. but lets see how it runs the printer…
@ChrisRiley
Жыл бұрын
We'll see, stay tuned!
@winandd8649
11 ай бұрын
@Chris : Please test the Canbus functionality of this board! (seems to be troublesome) and also; The KLIPR has it's own on board 'raspi like board' , but would it be possible to connect the board using an external Raspberry pi? (so not using the internal one?)
@ChrisRiley
11 ай бұрын
Will do on the can bus stuff, it's on the list. Yes, it responds to USB just fine, so you can use an external PI if you would like.
@winandd8649
11 ай бұрын
@@ChrisRileyGREAT!! thanks man!
@Mr.Thermistor7228
11 ай бұрын
What's the point of getting this board then? Why not just get a board with mcu only? Like monster 8 for example
@winandd8649
11 ай бұрын
@@Mr.Thermistor7228 Of course you plan to use the on board pi clone, but it's not entirely a raspberry pi so you could find out that it does not suit your needs (f.e. too slow when using x camera's) or it'snot entirely stable. That's why it's nice to have an escape route to use a external raspberry pi if you fel the need for it.
@moimeme7704
9 ай бұрын
if you can test canbus whit this bord its very nice!!!@@ChrisRiley
@onewa712
4 ай бұрын
Awesome video as always! By the way, do u know if the Rpi could be used as standalone, without a local network? I mean, if I happen not to have a local network, could I connect with my laptop to the printer somehow?
@ChrisRiley
4 ай бұрын
Thanks! You would use a network cable, maybe a switch cable and plug it into a computer network port. So it would be network port to network port.
@onewa712
4 ай бұрын
@@ChrisRiley alright! I'll try it, thank you Chris!
@Thomllama
Жыл бұрын
Lololololol “Aroooga” horn!
@ChrisRiley
Жыл бұрын
I'm glad you like it! Thanks for your help Thom!
@billkaroly
4 ай бұрын
Today the skipr board is $59.95 on Amazon. I wonder if the Artillery Sidewinder X4 Pro can be hacked because its basically a MKS SKIPR modified for Artillery. The firmware for the X4 sucks.
@ChrisRiley
3 ай бұрын
It could be, but Artillery likes to use there own consolidated plugs for wires and such. That makes it a lot more challenging.
@christianmontagx8461
Жыл бұрын
Thank you! At first sight it sounds great but the showstoppers for me are the incompatibility for other Linuxes like Debian and the missing Bluetooth dongle. Also the "wrong" language setting confuses me as it should be english not mandarin :)
@ChrisRiley
Жыл бұрын
I hear you, I wish they would all get together and decide on a distro to go with, very frustrating.
@linkin987456
9 ай бұрын
If you're like me and cant get your SKIPR to connect Via usb: check the cord. I had a power only cord, wasted over an hour on that
@ChrisRiley
9 ай бұрын
Thanks for the tip!
@bleach_drink_me
7 ай бұрын
Did you happen to try and install the Bed distance sensor with this board? If so what pins did you get to work? I have this board on my vzbot and it's been pretty good.
@ChrisRiley
7 ай бұрын
I haven't tried the BD on the MKS board yet, just about any pins should work for the sensor.
@bleach_drink_me
7 ай бұрын
@ChrisRiley I ended up getting it working. I ended up using the probe pins, gnd from X min and the 3rd pin bottom row (closest to the notch) on exp2. I tried a few different pins but didn't get it to work. BTW on my board the exp headers are 180° off from what mks shows them on the github. Seems others have had the same issue with the monster8 as well.
@ottersdangerden
Жыл бұрын
I think hell will freeze over when Llama has a klipper printer... the conversations we have had about it. LOL
@ChrisRiley
Жыл бұрын
HA! :) We will see what we can do.
@jescheffler
Жыл бұрын
As an added bit of info 'ipconfig' doesn't work on every distro 'ip a' usually works better as well as being shorter.
@ChrisRiley
Жыл бұрын
Did I say or enter ipconfig? Shocked that works at all, I was thinking ifconfig. You’re right though, I should start using ip instead.
@jescheffler
Жыл бұрын
@@ChrisRiley you probably used ifconfig. Hazards of working with *nix and Windows... 😛
@emulator7503
7 ай бұрын
Thanks for your videos. Can you make one about pairing MKS skipr to MKS thr 36/42 for can bus configuration?
@ChrisRiley
7 ай бұрын
I'll look into it!
@brasscog8890
Жыл бұрын
Just right click the start menu and choose device manager
@ChrisRiley
Жыл бұрын
Thanks for the tip!
@carlhaw2601
10 ай бұрын
Been watch videos learning you are great.....question wondering how to get dual z motors working in klipper main board is skr 1.3 or where to look. Trying to learn the script for klipper
@ChrisRiley
10 ай бұрын
Thanks! If you are using the second extruder driver for your second Z I would start here. You will have to update the pin numbers to match your board. [stepper_z] step_pin: P0.22 dir_pin: P2.11 enable_pin: !P0.21 step_distance: .01 endstop_pin: probe:z_virtual_endstop position_min: -3 position_max: 220 homing_speed: 50 second_homing_speed: 5 [stepper_z1] step_pin: P0.1 dir_pin: P0.0 enable_pin: !P0.10 step_distance: .01
@carlhaw2601
10 ай бұрын
@ChrisRiley thank you very much
@benzweers1291
Жыл бұрын
Dietpi OS maybe a good fit supports lots of different boards this may fix your problem including rpi
@benzweers1291
Жыл бұрын
htop is nicer
@ChrisRiley
Жыл бұрын
Thanks!
@Mitsuolevel
Жыл бұрын
Classic lama
@ChrisRiley
Жыл бұрын
For sure!
@el_mario_reus
Жыл бұрын
this is the perfect board for a bcn3d sigma r17? 😮
@ChrisRiley
Жыл бұрын
Yeah, it should work fine.
@HelgeKeck
Жыл бұрын
nice board, does this support additional motor power input per driver? for 48V
@kellyjordan
Жыл бұрын
Does not look like it. Also, driver capacitors are 35 volt rating.
@HelgeKeck
Жыл бұрын
@@kellyjordanthanks
@ChrisRiley
Жыл бұрын
👍🙂
@peterbeery643
9 ай бұрын
Great video series. I couldn't get the wifi doggle since Amazon is out of them. But I found another with the same chip and it shows up on ifconfig. But I can't get armbian-config to show wifi under network. Instead I get 'Clear' in that position. Any ideas on how to move forward?
@peterbeery643
9 ай бұрын
Ah. I just saw your "No Wi-Fi after reboot video" (head smack...ow). Thanks Chris!
@ChrisRiley
9 ай бұрын
I'm glad you going! Thanks for watching
@EduardoSousa-fk6oy
Жыл бұрын
Belive its better to use a good fast SD card , than emmc, the adapter is separated.
@ChrisRiley
Жыл бұрын
I think so too! Thanks
@Mr.Thermistor7228
11 ай бұрын
Thought emmc is the way better option? Constant read/write on sd card wear them out quick?
@EduardoSousa-fk6oy
10 ай бұрын
@@Mr.Thermistor7228 MKS emmc is to slow , test your self and you go to see i AM right, on teory you are right as i think it to wen i orderd it, but since the MKS emmc is to slow , we were rong🤷🏻♂️
@last-zura8899
2 ай бұрын
Is there any way to update the OS packages of MKS SKIPR?
@ChrisRiley
2 ай бұрын
You can, but you will have to use the ones they give you for now. drive.google.com/drive/folders/1tTuSvF9OL2qtPXElau8YOXn2sWbdxa9e
@last-zura8899
2 ай бұрын
@@ChrisRiley thank you man
@stiggybishope5449
Жыл бұрын
hi chris i wonder if u can help me ive tried to follow ur video on configuring uart mode with gpio pins on pi 4 with skr mini v3 but it does not cumminicate with skr board
@ChrisRiley
Жыл бұрын
What firmware are you trying to setup? It can be a bit different depending on which one.
@stiggybishope5449
Жыл бұрын
im using kiuah klipper but i have mainsail not sure if thats is intferfereing with it
@ChrisRiley
Жыл бұрын
@@stiggybishope5449 It could just be the GPIO pin need to be changed when you do the make menu config. You can usually find them on the schematic. github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/hardware/BTT%20SKR%20MINI%20E3%20V3.0/Hardware Looks like you would need to use PA2 and PA3 if you are cabled to the TFT pins.
@stiggybishope5449
Жыл бұрын
i that the tx2 and rx2 on the skr min e3 v3 and do append the exclamation mark? in gpio on start up in make menu?
@ChrisRiley
Жыл бұрын
@@stiggybishope5449 In communications interface in makemenu should say PA2 PA3. No GPIO change.
@neo39wfpv72
8 ай бұрын
hey , im about to start my adventure to instal makerbase skipr on a anycubic kobra max , i have a ? . the drivers i need , what drivers and how many should i use ?
@ChrisRiley
8 ай бұрын
Here's a link to the drivers. I know you need at least 4 but maybe more depending on what you want to do. TEQStone TMC2209 Stepper Motor Driver with Heat Sink and Plug 5 Pack on Amazon: geni.us/9OXR
@emulator7503
9 ай бұрын
35 buks? In UK you pay 93 gbp for this board alone from ali cheapest price is 71 with tax but at least it comes with screen, emmc, wifi dongle. I guess UK is just wrong country to live in.
@ChrisRiley
9 ай бұрын
I can't find it at that price anywhere either. ¯\_(ツ)_/¯
@emulator7503
9 ай бұрын
how to log into skipr as user not root.
@ChrisRiley
9 ай бұрын
User username mks and password makerbase
@thediscoman2001
10 ай бұрын
amazon dont sell the board and its now 60 on aliexpress so not so cheap a board
@ChrisRiley
9 ай бұрын
I haven't been able to find one that inexpressive either.
@The_original_Reth
Жыл бұрын
How about converting a prusa to klipper
@ChrisRiley
Жыл бұрын
The MK3 is pretty difficult to convert due to the serial chip. Personally I use all my Prusa's for daily printing and enjoy the stock firmware, so I never wanted to alter one to install it.
@333donutboy
Жыл бұрын
Not to be that guy but the board on Amazon is $60. Maybe it had a huge price jump from the time you made the video.
@ChrisRiley
Жыл бұрын
He must have gotten a deal. We couldn't find the $35 board either.
@333donutboy
Жыл бұрын
Hopefully he shares his source for that deal. That's a lot of capability for that price. Even at $60 it might be worth it.@@ChrisRiley
@Thomllama
Жыл бұрын
yea, I think it was a pre order deal, had to wait about 6 weeks for mine. Still low cost at 60 bucks for all it is!
@ChrisRiley
Жыл бұрын
@@Thomllama Looks like the Monster board is the new cheap board and it's almost the same as the SKIPR
@Thomllama
Жыл бұрын
@@ChrisRiley monster 8 board is old, and doesn’t have the pi/computer on board… unless there is a newer one?
@Mr.Thermistor7228
11 ай бұрын
35$ !!?!?!? That is a freaking STEAL!! it is pretty much double now at 60$!!! A lot of boards have increased in price too, sucks bad
@ChrisRiley
10 ай бұрын
No kidding!
@airheadbit1984
5 ай бұрын
While you protest the method vendors use for software distribution what you should be doing and all others that review 3D printers should be doing is just say no, no review of a product that is obsolete the day it is release due to the total lack of updatable software. I own a printer that uses a version of the Makerbase MKS Skipr, Two Trees SK1, it has never had a working camera, it's display subsystem is serial because it lacks a HDMI connector (left it off the PCB to save money?), reviewers like you reviewed the machine and never mentioned how broken this machine is, some did mention the noise caused by 4 fans trying to keep the Makerbase MKS Skipr cool enough to run. At any rate, you and others that publish reviews of junk like the MKS board should just stop, there are plenty of controllers that work to review, just say no to junk, perhaps the manufactures will stop this disgraceful practice of producing worthless junk, I doubt it, Rockchip has been doing this since they started, making one day wonders that become pet rocks overnight collecting dust taking up space.
Пікірлер: 130