I had a blast making this knifes! First off I tried out making a tanto style blade, and second I experimented with acid etching. I made two knifes, one crude, almost post apocalyptic looking, and one high polished. I hope you enjoy!
Web Shop: inmyshed.godaddysites.com
1. Checkering File - amzn.to/3Sn8i4Q
2. Files I like - amzn.to/3YCbo6D and amzn.to/3ZxZko4
3. Tetra Gun Liquid Blue - amzn.to/3xH2zgR
4. 123 Blocks I use - amzn.to/3UgktkM
5. Hardness tester file set - amzn.to/3mg3q5T
These are amazon affiliate links.
FULL DISCLOSURE
I earn from qualifying purchases.
Heat treating
I got the data from looking at manufacturing sheets, youtube and varies blade forum post.
The blade
1. Preheated at 1472F / 800c for 15m
2. Held at 1940F / 1060c for 20m
3. Plate quenched about 2m
4. Put in regular freezer for 60m
5. Tempered at 437F / 225C 2x2 H. Air cooled in between
The spring
1. Preheated at 1472F / 800c for 15m
2. Held at 1940F / 1060c for 20m
3. Plate quenched about 2m
4. Air cooled to room temperature.
6. Tempered at 1099,4F / 593C for 1H
Pocket clip
1. Preheated at 1472F / 800c for 15m
2. Held at 1940F / 1060c for 20m
3. Plate quenched about 2m
4. Air cooled to room temperature.
6. Tempered at 1099,4F / 593C for 1H
0:00 Making the blade
0:35 Checkering
0:46 Nail nick
1:06 Stamps
1:20 Making the back spring
1:54 Heat treating
2:55 Making liners
3:52 Making handle scales
4:25 Test the fit
5:45 Prepping for etch
6:38 Etching
7:59 Making pocket clip
8:50 Etching the blade, spring and liners
9:07 Stone wash
9:34 Assembly
Негізгі бет Тәжірибелік нұсқаулар және стиль Knife making - Two small pocket knives
Пікірлер: 23