Hopefully people see this before they start - the washers are only used on one side - the side with the shifter. Would be good to put that in the description or in an update to this video. There are some comments lower down asking this, but putting this as a "top level" comment hoping people see this.
@dirtniron
4 жыл бұрын
i dont thing you are correct, there are washers on both sides, check the oem diagram
@pearsth
4 жыл бұрын
Dirt N Iron There are a total of two washers needed. If you look at the swingarm, the two washers go on the side to the left of the rear shock in the swingarm. On the right side, you don’t use any. Are you saying you used four washers when you did this, or only two?
@dirtniron
4 жыл бұрын
Things With Wheels why do you think you only need washer in the left side? They are identical.
@pearsth
4 жыл бұрын
@@dirtniron Only one side is needed. Kits come with only two washers. I actually thought my kit was missing washers when bought it. Take a look at this image. Part 12 in OEM diagram is the "stop disc". Only two required per swing arm. photos.app.goo.gl/3pCGE5PAzdefHziBA
@tractordirt5167
2 жыл бұрын
Just tearing apart the swingarm…there appear to be 4 washers in there, but my all balls kit only has two
@JayGee6996
5 жыл бұрын
It's nice to see you using a technique that the everyday man/woman can replicate
@JayGee6996
3 жыл бұрын
If you’re stupid, do what these two idiots are saying. I’d thoroughly recommend being scammed, it’s a once in a lifetime experience.
@xterrential
5 жыл бұрын
Was thinking about you and your build this morning. Glad to see another step in the right direction👍.
@brandonaga9042
5 жыл бұрын
Nice old craftsman vise!!!🤘💪
@dirtniron
5 жыл бұрын
Yes, that vice remembers times when 2 stroke was raced in supercross ;)
@FteamHyper
5 жыл бұрын
I really wish the videos are much longer I love em keep me entertained for hours 😁
@dirtniron
5 жыл бұрын
Thanks brother :)
@nicholaschai4458
5 жыл бұрын
really wish your video could be more longer,can't wait to see the next progress ..love it...keep it up
@dirtniron
5 жыл бұрын
Thanks Nicholas ;)
@bpowa
5 жыл бұрын
1st.. I feel like a winner. Though I rather be riding today. :)
@dirtniron
5 жыл бұрын
Me too, I wanted to go but it was raining. Hopefully tomorrow no rain, dirt should be great!
@doubledown9333
5 жыл бұрын
I think there is nothing like the feeling of new bearings on an old bike that you have ridden beforehand:)
@dirtniron
5 жыл бұрын
I hope the bike will feel like new
@doubledown9333
5 жыл бұрын
Yes,it will take a few rides to bed everything in,like a new bike:)
@mxrider2strokebraaap54
5 жыл бұрын
Great video!👍 next video: the build:D
@dirtniron
5 жыл бұрын
Yeah, finally hopefully. ;) Still waiting for my prescious engine to arrive
@xterrential
5 жыл бұрын
For the heating up of the swing arm I would recomend a digital heat gun next time. That way you don't bring the aluminum to the point of fatigue by heating it up too much. Still a really easy way to do this. DIY moto rebuilds.
@dirtniron
5 жыл бұрын
yea, thats nice upgrade. I didnt heat it for very long, should be ok
@Dendyredyre
5 жыл бұрын
Thanks man!
@dirtniron
5 жыл бұрын
welcome ;)
@michaelzamora9206
5 жыл бұрын
Great video rado keep up the good work!
@dirtniron
5 жыл бұрын
Thanks Michael!
@RAD_Family
5 жыл бұрын
Awesome job brother!!!
@dirtniron
5 жыл бұрын
Thanks bro!
@iandavies2745
2 жыл бұрын
1 washer either side on the sprocket side, no washers on kick-start side,
@dirtniron
2 жыл бұрын
Thanks
@ratedredneck96
5 жыл бұрын
Arent the bearing needles open? Cameron niemela said they were held in by grease so shouldnt you be super careful to keep from losing needles...like i did.
@dirtniron
5 жыл бұрын
not these bearings, usually linkage bearings are like that
@tomm5712
2 жыл бұрын
Do the final rings you install into the seals sit completely flush against seal? Mine sticks out a little bit
@eschrader
2 жыл бұрын
Some swing arms have shim washers, check your service manual or rebuild kit instructions if possible
@bigos.motoowens5813
5 жыл бұрын
👍👍👍😁
@egar1m
3 жыл бұрын
thanks for this video! i see that there are number on one side of the bearing, that side must facing to external correct? thanks
@dirtniron
3 жыл бұрын
arent they identical? I think either way is ok ..
@egar1m
3 жыл бұрын
@@dirtniron yes one side is flat with number and the other side is little bit rounded! I found that is correct to put the flat side outside! BUT i also found the washers only on one side !! WHY? I can't understand that... Do you have any idea? Thanks regards PS I love your videos!!!
@laz288
3 жыл бұрын
@@egar1m Did you figure out the washers? I thought I lost 2 washers then looked at the schematic and noticed the washers are only on the sprocket side (left). Wonder why seems both sides take the same seals, bearings and spacers.
@egar1m
3 жыл бұрын
@@laz288 no :) This will be remain a big question without answer.. :D
@TC07YER
3 жыл бұрын
I am wondering the same thing. I installed mine but didn’t check that the text was facing outwards. Do you think they will be okay?
@RAD_Family
5 жыл бұрын
Hey Rado I’m heading to San Diego in March we should meet up?
@dirtniron
5 жыл бұрын
Cool! Let me know ahead, would be nice to meet!
@RAD_Family
5 жыл бұрын
Dirt N Iron will do brother
@Cockers96
4 жыл бұрын
Great vid! Whats that tool you used to remove the seals?
@dirtniron
4 жыл бұрын
i think you mean pick..
@everettkellner
5 жыл бұрын
What size socket do you use to press out and press in the bearings? Also did you notice any circlips in your swingarm? I’m having a very hard time getting mine out and wonder if there’s a circlip holding me back. Thanks
@dirtniron
5 жыл бұрын
i dont remember the size but make sure it sits nicely on the outer rim of the bearing, no clips just seal and a washer I believe. If there is one you would be able to see it
@rasputin.republic.acidtiger
Жыл бұрын
Bro if it's not too much Can you please mention me 1. Bearing dimensions 2. Swingarm pivot 3. axle dimensions
@moikkamoikka874
5 жыл бұрын
what kinda bike i should buy i want 2 stroke and i m 167cm long and i m only 56kg. i have been riding moped half year i would ride in swamp forest and in the gravelled road should i buy 125cc or 80cc is the 125 too powerfull and what is pros and cons in 80cc and 125 and honda suzsuki rm or yz?
@dirtniron
5 жыл бұрын
How old are you?
@moikkamoikka874
5 жыл бұрын
@@dirtniron im sixteen
@dirtniron
5 жыл бұрын
I would get 125
@moikkamoikka874
5 жыл бұрын
@@dirtniron thanks : )
@motokid1492
5 жыл бұрын
i have a rod that needs greasing so im gonna get my gf to grease it upp for me :) Nice video man this build is making me really jelaous keep upp the good work if u gonna respond to this commment i wont see it afterr like 30 - 40 mins i gotta run down to the store and get som "Grease"
@dirtniron
5 жыл бұрын
thanks for the comment dude.. .. you know, I was never big fan of this kind of jokes, I guess I am old-school guy
@motokid1492
5 жыл бұрын
the world needs more old school guys i think also are u gonna put a bigger tank on the bike ?
@motokid1492
5 жыл бұрын
im just wondering what humor do peoplae have in america i have never been to america but in Skandinavia where i live most of the people have really dark humor (including me)
@broughttoideas
5 жыл бұрын
@@motokid1492 in America if you think it you say it offensive or not i remember hearing the old say thin skinned or grow some skin now it seems everything's being censored and sissyfied you dont wanna offend someone oh no lol
@storken756
4 жыл бұрын
My kit only includes two washers but i will need four. Right?
@dirtniron
4 жыл бұрын
I am not sure, it should have all the parts needed
@storken756
4 жыл бұрын
Dirt N Iron its an original ktm kit and it only contains two..:/
@zoeboudreault
4 жыл бұрын
Emil12232335 mine too!
@storken756
4 жыл бұрын
@@zoeboudreault You only needed two!! I bought two more and it was too thick. ONLY USE TWO
@dustinmoore8909
3 жыл бұрын
@@storken756 did you put the washers on the inside or outside on each side? I forgot which side they were on when I took them out!
@MCCVIII
7 ай бұрын
Greasing your bearings without putting a glove on… you must be an anarchist!!!!!😂
@MCCVIII
7 ай бұрын
Thanks for a great video! Helpful, I’m rebuilding my 2003 Ktm 525 exc
@dirtniron
7 ай бұрын
have fun with your project!
@spymaine89
5 жыл бұрын
what was wrong with the bearings
@dirtniron
5 жыл бұрын
I guess nothing too serious, but I want this bike to feel like new
@spymaine89
5 жыл бұрын
good teaching project.
@dannyb9055
4 жыл бұрын
Can you help me with bearing number?
@dirtniron
4 жыл бұрын
look it up online, I dont have the numbers anymore
@osvaldodavia8844
Жыл бұрын
at minute 8.42 insert the washers, but in the KTM manual they are only on one side, that is the one of the chain why?
@ahmadrozi3899
3 жыл бұрын
Number bearing swing arm husqvarna ??
@vegasromaniac
5 жыл бұрын
I don't use bearings... Anymore.... I'm done
@dirtniron
5 жыл бұрын
What do you use ? :)
@vegasromaniac
5 жыл бұрын
@@dirtniron it's a misterious substance only found in Romania, it's called " fate in whatever is there already" haha
@nicovanduin1553
5 жыл бұрын
@@vegasromaniac They say some extra play here and there increases suspension travel
@vegasromaniac
5 жыл бұрын
@@nicovanduin1553 oh yeah, they woble over rocks loke nothing
Пікірлер: 90