Thanks I just started by Kubota after a couple of years of sitting - my pedal did the same - not stopping but I found the spring in the middle of the driveway so I know for sure what it was for and where it goes - I need a new spring ! To all you woman out there - yes you can fix it !! I am almost 72 - there is always someone with some smarts to make these video's for us !!
@MrStubat
2 жыл бұрын
Finally …someone actually found the problem. Thanks so much. All the others were so far off the mark at the actual problem.
@bwax1542
2 жыл бұрын
Excellent information to solve a problem on my B6100HST. Thanks and please keep the B7100 videos coming.
@lmoore5264
Жыл бұрын
I bought my B7100 a year ago and it has always crept forward and I find I have to reverse it a little to get it to stop. It is a real pain in high range and in low range it is so frustrating to control it smoothly. I maxed out my tensioning spring as you did but it hasn't helped. So seeing your video is certainly gonna make my life much easier. Thank you for posting.
@dclrepair3869
5 ай бұрын
Genius, Mine just did the exact same thing, Looked in the manual and nothing just going to put it on my lift. So I figured KZitem......bam you nailed it. Thanks
@MrStubat
2 жыл бұрын
Excellent.
@organicvids
Жыл бұрын
My b21 doin the same. Just verified with kub dealer. There is a nylon bushing that fails along with bearing. Replace both
@pah9314
2 жыл бұрын
OMG...that's the exact problem I am having. How were you able to bend that bar? I was thinking it needed a spacer of some kind to keep it in place.
@bucksgarage1
2 жыл бұрын
I just used a pry bar
@mattseward6329
6 ай бұрын
Ive got one of these ... Its doing funny things and when you push the peddal down it whines a lot and then occaisionally the forward makes it go Backwards and backwards makes it go Forwards ? Any Ideas greatly appreciated... I have managed to settle it down to forward making it go forward gor now with little whine but thinking it will probably fault again ?
@bucksgarage1
6 ай бұрын
I haven't torn into any issues like that but I would bet something is going wrong in the hydrostat. It would probably be worth you time to try a fluid change. See if you see any metal flakes in the oil and in the hydraulic filter.
@mattseward6329
6 ай бұрын
@@bucksgarage1 That’s my next port of call. I get the impression there is air in the wrong places which is stopping the Swash plate from properly being engaged and engaging the drive. Going to drop the hydro Oil and put a new Filter on it and clean the mesh screen ..
Пікірлер: 12