your really getting the barn and everything around it in shape man
@farmboy30117
11 жыл бұрын
I appreciate that. I'm just happy to have a place I can fit a vehicle in and close the door if I need to.
@cowcowsam1
11 жыл бұрын
Hi Jay, looks like you did a real good job taking that thing apart. I'm glad you used an impact wrench to loosen up the bolts, I always use my impact wrench for that kind of stuff. Can't wait to see your next video. Pete
@farmboy30117
11 жыл бұрын
It's the best way! It'll either break it free or wring it off. I need a bigger impact though. Thanks Pete.
@farmboy30117
11 жыл бұрын
I hate buying used equipment. You never know if the person that had it knows something you don't. I reckon replacing or fixing the bar and other odds & ends will put it in good shape for at least another 10 years.
@cableholder100
11 жыл бұрын
Nice video, keep em' coming!
@farmboy30117
11 жыл бұрын
It's getting there. Thanks
@farmboy30117
11 жыл бұрын
That's good. I had the same issue on mine about seven yrs ago
@farmboy30117
11 жыл бұрын
Thank you!
@cole1066turbo
11 жыл бұрын
looking good
@farmboy30117
11 жыл бұрын
That's a good idea. It's a Sparta. Made in the USA
@1995jug
11 жыл бұрын
Be a good time to inspect you gearbox for wear bearings, seals and whatever at least new oil, I would have to say that's a good breaker bar.
@farmboy30117
11 жыл бұрын
You've blown the inner seal in the cylinder. The hole allows air into the cylinder when you let the bar down. It'll have to be rebuilt. The kit is available from Kuhn. It's not too hard to rebuild them.
@danielking596
11 жыл бұрын
I ended up being able to lift the bar into the vertical position and collected the hydraulic fluid that continued to come out. It will still probably need to be rebuilt but it was working well enough to get the first cut done!
@farmboy30117
11 жыл бұрын
Gotta have a strong back for that one! I really need a 3/4" impact.
@XMSTARSHIP2
11 жыл бұрын
AMEN
@danielking596
11 жыл бұрын
I appreciate the videos! I've been watching through them. I have a GMD 600 and there's a small vent hole/ breather port at the top (away from where the hydraulic hose enters) of the hydraulic. I went to use mine the other day and it started spewing out of the hole when I tried to lift it. Any idea what the problem might be?
@1995jug
11 жыл бұрын
Looks like you need you torch out there for them rusted bolts heat does wonder on them. i know you dont want to buy another mower but i might be your best bet might find a used one for not much more than repairs on yours. carry on
@slowride55
11 жыл бұрын
My neighbor has a 1" impact. Its roughly the size of your arm from your elbow to your fingers lol
@cableholder100
10 жыл бұрын
Do you maybe think you could do a update video on the disc mower? Thanks
@farmboy30117
10 жыл бұрын
I just used it yesterday to cut some hay. Was going to video it, but too windy. I'll get an update video next time.
@cableholder100
10 жыл бұрын
Haha wow your cuttin all ready! We don't have anything ready yet, it will Be a couple more weeks here. And thanks! I appreciate it
Пікірлер: 23