Thanks dude, this is going to help me immensely tomorrow!👍🏻
@richmillsap3541
4 жыл бұрын
I just finished using this technique and it worked great. One thing I did different was trim the locking edge off with a utility knife instead of cutting it with my table saw. Other than that everything was the same and it worked prefect. Thanks Brian.
@brianmckimmey3624
3 жыл бұрын
I'm glad it helped you! Thanks
@peterlynch5965
2 жыл бұрын
Tk u. It really helped n gave me confidence to tackle it.
@wayneguy6043
4 жыл бұрын
Great job on the underlayment.
@brianmckimmey4421
4 жыл бұрын
You can... You may have to clean out the groove on the area you glued. May be a little time consuming.
@MajorC202
3 жыл бұрын
The cuts in the moisture barrier have compromised the integrity of their purpose. This is especially relevant in southern/humid climates. Apply a couple of strips of moisture barrier tape over the cuts and your good to go.
@brianmckimmey4421
3 жыл бұрын
Yes, you can if you know the slab has a high moisture reading. In this situation the minor scars in the underlayment should not compromise the floor. Clear packing tape would work well if you are concerned with moisture.👍🏻
@baconair
3 жыл бұрын
Aren't there any grooves on the shorter edges, that had to be cut aswell?
@dougsimmons5422
2 жыл бұрын
How much would it cost for the repair u just did. I just installed my own floor and of course damaged one near end of job. Hiring may be better bet for me
@abbyanderson4171
Жыл бұрын
I'm impressed,Sounds needs addressing though...
@coreyperez13
2 жыл бұрын
Thanks Brian. That tool is absurd at $130 for a hinge and 3M sticky tape!
@brianmckimmey3624
2 жыл бұрын
It is on the pricey side. Worth it if you use it a lot. The tape is nice as it it doesn't leave a tough residue to remove if you ever use it to correct separation at the end joints.
@williewilliams9220
Жыл бұрын
Good job
@jasonblow3668
3 жыл бұрын
Thx I now know what I need to do.
@brianmckimmey4421
3 жыл бұрын
Glad it helped.
@ciscodimas1597
2 жыл бұрын
I go fix one for a client the piece is in the middle of the living room how much is the right price to charge?
@brianmckimmey3624
2 жыл бұрын
$150-$250
@ciscodimas1597
2 жыл бұрын
Thanks Brian McKimmey 👍
@robertmendenhall1350
3 жыл бұрын
Where do you buy the the tool that you use I have the double back tape on it
@brianmckimmey3624
3 жыл бұрын
You can get them on Amazon. Quickstep tapping tool
@thebunnyluvr
4 жыл бұрын
what tool is that that sticks to board to move it?
@cesaralfaro7946
3 жыл бұрын
X2?
@keithpaldino5439
2 жыл бұрын
Where you located out of? Need some boards replaced.
@djhec2083
4 жыл бұрын
Thanks for the great tips .
@okinake
Жыл бұрын
Thank
@jassingh6744
3 жыл бұрын
What is tool name to push the plank?
@brianmckimmey4421
3 жыл бұрын
Quickstep tapping tool
@coreyperez13
2 жыл бұрын
Unifix Repair Tool (By Quick-Step) Thing costs $130 on Wayfair! Crazy for a hinge welded to a piece of steel and some 3M sticky tape....
@wayneguy6043
4 жыл бұрын
I guess if you had to repair that board again you are screwed because all the planks are glued together....
@edinm.6264
Жыл бұрын
We’ll done
@MrCabimero
2 жыл бұрын
Needs a new dust collector.
@brianmckimmey3624
2 жыл бұрын
What do you mean?
@MrCabimero
2 жыл бұрын
Looks like your vacuum wasn’t working propery
@fernandoullaguari9073
3 жыл бұрын
Wrong once you cut the locks even if you glued eventually it will lift up in the future. Right way is to open up from the closest wall, replace the damaged ones and reinstall again. If you want it done the right way.
@brianmckimmey3624
3 жыл бұрын
Glue a board together and try takeing it apart in a day. You will be surprised.
@dtjs61
4 жыл бұрын
This type of flooring is junk and water make it swell junk junk junk ..
@johnstonjeremy86
4 жыл бұрын
Yup, vinyl is better.
@delta1_6
4 жыл бұрын
then why do you watch this video
@MajorC202
3 жыл бұрын
@@johnstonjeremy86 Vinyl looks like garbage. If real wood isn’t an option, today’s laminate products are virtually indistinguishable from real wood.
@brianmckimmey4421
3 жыл бұрын
All laminates have there pros and cons. With these types of floors it's usually for the look of wood for a reasonable price.
@delrokosh1902
4 жыл бұрын
Brian, obviously you don't bother to review your own video. Almost no sound and you speak very softly.
@brianmckimmey3624
4 жыл бұрын
Hopefully it helped with your issue.
@annjohns350
2 жыл бұрын
Can't hear you talk up
@cascaravia1
4 жыл бұрын
not good repairs you not suppose to cut the tang you need to cut only on the bottom of the groove in the long side also in the end side
@brianmckimmey3624
4 жыл бұрын
To be honest you can do both ways and be successful. thanks
@jodypenn2009
Жыл бұрын
Can't even see what you're doing..you're off camera...I can hear the saw.
Пікірлер: 48