Front Drive Hub eBay goo.gl/d5Fw02 Front Control Arms eBay goo.gl/ZKz71a
@W3BL4Z3D4NK
10 жыл бұрын
I never take the time to post video comments but I really appreciate your videos man. You make knowing how to diagnose and fix all this on my 05 Lancer Es so much more simple. Keep up the good video work.
@DarkDragonWing
10 жыл бұрын
cheers
@thomascrown5220
6 жыл бұрын
Your mechanical aptitude is amazing. You keep yourself calm n composed as you work n seem to be enjoying it. That's bec you know what you're doing. Did you know there's a Safety Recall involving Lancers and that Control Arm you're working on. It's about rusting control arms that eventually fails.
@DarkDragonWing
11 жыл бұрын
ขอบคุณครับ ดีใจที่มีคนไทยด้วยกันมาดูครับ
@DarkDragonWing
11 жыл бұрын
Yes! I think so. I'm looking at a very nice set of body kits and I think no one will be disappointed. Cheers!
@DarkDragonWing
11 жыл бұрын
1. It's old, and it's got about 160,000+ miles on it. 2. It's in Minnesota, we got snow every year and we use salt a lot. (Salt is bad for metal) 3. I drive like I play Need For Speed. LOL Yea.
@pust134
11 жыл бұрын
done a real man in the house
@DarkDragonWing
11 жыл бұрын
No problem. Cheers!
@jamespoon1724
11 жыл бұрын
I'm in the same boat with you man .... NO AIR TOOLS!!! 20 times of pain 40 times of anger management lol
@katherinetupalow4321
6 жыл бұрын
I'm learning so much from your videos
@montysport94
10 жыл бұрын
You've got talent, man. We have the same car, except mine is manual. I'll hopefully be doing an Outer tie-rod replacement video, and possibly a torque mount video as well. Either way, thanks for the tutorials!
@DarkDragonWing
10 жыл бұрын
cheers!
@tunnut086
11 жыл бұрын
พี่เก่งมากเลยอะ ทำเองทุกอย่าง
@donathanleon692
10 жыл бұрын
always a pleasure to see your vids men . great work. i will need to get me some more tools to work on my car myself.
@josephmelville1
11 жыл бұрын
lol dude i have the same car and i love working on it myself, right now my timing belt had gone so i am replacing it right now, i got myself some cheap electric power tools, works good enough, i think i will put up a post man.
@9shadnaushad824
7 жыл бұрын
Excellent job Boss👍
@DarkDragonWing
11 жыл бұрын
Thank you! Cheers!
@reloaddan
11 жыл бұрын
Have the same car a 2002 your videos has help me alot
@SirRav73
11 жыл бұрын
You are a very impressive mechanic
@mAdAsZaC
11 жыл бұрын
great styling of videos
@31deathreaper
11 жыл бұрын
hey all... from trinidad and tobago dark i like your vids man...
@DarkDragonWing
11 жыл бұрын
Cheers!
@lewisluigicobos7822
7 жыл бұрын
The best videos brother
@jdg8676
8 жыл бұрын
Okay good work but could you please do this videos outside or with brighter lights thanks
@ubemejor
10 жыл бұрын
Gracias. Desde Costa Rica.
@katherinetupalow4321
6 жыл бұрын
I have the exact same car your videos are a blessing thanks soooooooo cool
@mitsi2010
7 жыл бұрын
Nice.. Got it done!!!
@countrychloe
11 жыл бұрын
I want you to live next door to me. lol Great job! :):)
@DarkDragonWing
11 жыл бұрын
I see what you did there. :)
@guillenduarte1084
10 жыл бұрын
very useful vids bro!!!
@DarkDragonWing
11 жыл бұрын
It's still processing. :D Give it a couple of hours, then it should be in 720p HD. Cheers!
@DarkDragonWing
11 жыл бұрын
:D Still working on it. I don't know when I will be done though. Kind of busy lately.
There will be a video of me painting them calipers and drum brakes sometime! Cheers! :D
@42svb58
6 жыл бұрын
Great video, but I don't think I saw Jack stands for safety. It seems like Mitsubishi's are designed very similarly with other videos on control arm replacements are the same. There aren't a whole lot of videos on the 4g eclipse but everything looks the same. Thanks!
@DarkDragonWing
11 жыл бұрын
haha cheers!
@sammyrobot1
11 жыл бұрын
You did an awesome job but u should repaint your brake calipers red again so it will make your car look even cooler :)
@tunnut086
11 жыл бұрын
I like it (ผมเป็นคนไทยครับ)
@REDROBRCFPV
11 жыл бұрын
I don't know how u do it! I hate working on the floor! Good work though.
@DarkDragonWing
11 жыл бұрын
Yes, it's the same car.
@gpskate
10 жыл бұрын
What are tools you need to get off and put back on the control arm?
@DarkDragonWing
10 жыл бұрын
14mm 17mm 19mm Jack stand
@jezabelmae3201
5 жыл бұрын
Could you show a moderate video or explanation of the rear side alignment parts of your car? I have a 2002 Mitsubishi Lancer ES 1.6L Automatic & my tires are getting bold from the inside thread, my outside outer thread is ok. Thank You Awaiting For Your Prosperous Response from You Or Anyone Please...
@autopartesjimenez7929
5 жыл бұрын
Hi, I just bought a Delphi control arm for my 2006 lancer ralliart, but I can move the ball joint with my hand (doesn´t need a lot of pressure). I asked for a replacement but the new one has the same issue. So, since the control arm u installed should be the same as mine (not the same brand), do u remember if the ball joint was like this? or it was more stiff (almost impossible to move by hand)? Thanks
@МухаммедСаурыков
5 жыл бұрын
I thank you for video, is that it was necessary for me
@DanielGuzman-pc1wo
5 жыл бұрын
4:28-4:45 how did you manage to get that control arm bolt out...i managed to un-thread it but cant slide it out...
@ImRAn.03
5 жыл бұрын
How are you Mickey hope fine. ....... I have Mitsubishi Lancer 2005 but I have an issue with its oil pump where is it located 1.3 liter 4G13 engine waiting for your reply
@XavierRivera128
10 жыл бұрын
you are a lifesaver! but do you have any idea how many control arms a 2003 lancer OZ has? I'm trying to buy all to change all but i don't know. after seeing your video i figure you, or someone in the audience, might! lol thanks ahead of time and thanks for the video!
@DarkDragonWing
10 жыл бұрын
I know there's 2 control arms at the front, and two at the rear. The front and the rear control arms are different. hope this helps
@XavierRivera128
10 жыл бұрын
So there is one per wheel at the front wheels and one per wheel at at the rear?
@DarkDragonWing
10 жыл бұрын
yes
@travisluther5467
7 жыл бұрын
Hey man I need help with my lancer it's an 03 ...what I need is starting like when I crank the engine it won't start ...i bought new spark plugs n the wires n bought a new fuel pump n battery ..n yet it won't start
@Trials-and-Tribulations
10 жыл бұрын
I know this was done a year ago but have you had any problems with the left control you bought from ebay I've heard suspension parts are terrible from ebay and is you Lancer a 5 speed or automatic. Your video reminds me of Jafromobile. Very straightforward easy to follow video. props
@DarkDragonWing
10 жыл бұрын
No, the control arm is still fine. The car is AUTO. Thanks, cheers!!
@p0serj0nes
10 жыл бұрын
Nice videos man, did you change the sway bar bushings when you changed the control arm?
@DarkDragonWing
10 жыл бұрын
Oh no, I just changed them shortly before this video. So yea Cheers
@BrianAXStorm
9 жыл бұрын
you ever find a tool to remove the hub other than a hammer and socket, if not what size socket were you pounding that out with, I have alot of words, very inappropriate words at this moment about my feelings and this hub ... and btw, thanx. loving your videso
@DarkDragonWing
9 жыл бұрын
Brian Alexander Xavier Storm It was a 19mm socket. And you should use this: kzitem.info/news/bejne/qZqBz42Yo5GnrGk
@armandomagana2084
7 жыл бұрын
do a video on the rear lower control arms
@23ud
9 жыл бұрын
When you bent your front axle did it effect the steering wheel. Like steering was off to the right?
@DarkDragonWing
9 жыл бұрын
***** No, it will not effect the steering wheel. If your steering wheel is off to the right, you will need an alignment. Also, if you mean that when you step on gas and the steering wheel wants to turn right by itself, it means that the steering rag is bad. I have the same problem, Most Lancers do have this problem I noticed.
@grantwilson9364
10 жыл бұрын
Hello, when you changed ur control arms was there any bolt fasteners that went into the frame for the verticle bolt?
@DarkDragonWing
10 жыл бұрын
Yes. 4:19
@grantwilson9364
10 жыл бұрын
Wow really? You know what I mean right, I feel like I didnot explain it enough.
@DarkDragonWing
10 жыл бұрын
There was one that bolts the control arm to the frame at 4:19
@mrbeatdoctor
10 жыл бұрын
I think, if you are talking about the horizontal bolt with the captured nut inside the frame, then you already know what the risk could be. I did my control arms exactly like his video and it went as smoothly as his but my car has no rust. I did use the tire jack to lift the gearbox instead of a pry bar. All of the people with serious problems seemed to be from Canada or the northeast and have rust problems. There is no way to know if the bolt will fall in until you try the job. Good Luck.
@cjnunez8426
2 жыл бұрын
Have u ever change out the sub frame on a lancer 2003 or similar if so any videos of how u did it?
@DarkDragonWing
2 жыл бұрын
Nope, I haven't done that before.
@jonmccarthy8790
9 жыл бұрын
Did you have to remove any mounts to have movement in the trans for the front bolt on the lca
@DarkDragonWing
9 жыл бұрын
Jon McCarthy No.
@josephgeorge2300
2 жыл бұрын
Old video but yeah, I have a question, why at the starting of the video did you change back the rims?
@DarkDragonWing
2 жыл бұрын
So that the wheel can hold the hub in place while I try to un-tighten the axle nut.
@ddmishomisho811
10 жыл бұрын
Sup your seem to be the person to ask about the Lancer. hard to find INFO on it. Have few Question need to ask. 1) the Strud Bar, at 5:47 you reassemble it all back, how tide you have to tide the nut?? I'm about to change my, my broke off a while back on both side. 2) AC Sensor, if you turn the AC to max, and look at the AC Sensor under the Hood, there should be a clear glass looking sensor, my have bubble running in there, is it normal? or is it time for me to recharge the AC? i own the car for 11 years and not much hardcore tune up i did no it. beside the oil change and spark plug, Thank You.
@DarkDragonWing
10 жыл бұрын
1. Screw the nut in until you see the bolt coming through the nut. 2. It is normal. Are you having this trouble also?: Lancer Fix | Changing A/C Heater Control Gears - Ep.4
@ddmishomisho811
10 жыл бұрын
Thx for the respond. Yes i also have that problem as well. since day one i got the vehicle. just didn't bother me much, so did not change it. so the AC liquid suppose to be Bubbling??
@DarkDragonWing
10 жыл бұрын
Yes, bubbling
@LittleMsKelly
11 жыл бұрын
Thank you!!!
@Thr33Sh33ts
10 жыл бұрын
What size sockets did you need to use for the control arm? I hit a pot hole and bent mine, along with the sway bar end link.
@DarkDragonWing
10 жыл бұрын
I would suggest you to buy the whole set. It is cheaper that way and you won't have to buy more when you need the other ones. You will most likely need 12mm 14mm 17mm 19mm cheers
@Thr33Sh33ts
10 жыл бұрын
The DarkDragonWing Thanks.
@ราวีสําราญกลาง
7 жыл бұрын
สุดยอดครับ
@DarkDragonWing
11 жыл бұрын
Ahaha Yes, but no more hitting curves with the new rims on though. haha :D
@169Phoenix
10 жыл бұрын
Where did you buy your lower control arm? What size socket did you use for your CV axle end NUT a 30mm? or 32mm? Do you know what size are the Mitsubishi lancer CJ ES 2010 use? Im Viet too :)
@DarkDragonWing
10 жыл бұрын
Sorry I don't know much about the tools, I would say buy the whole set. I bought the control arm from eBay.com Like this pair that fits my car: www.ebay.com/itm/02-07-Mitsubishi-Lancer-Front-Control-Arm-with-Ball-Joint-Pair-Set-Kit-New-/370885431629?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ALancer|Submodel%3AES|Year%3A2003&hash=item565a7e914d&vxp=mtr cheers
@169Phoenix
10 жыл бұрын
The DarkDragonWing Hey buddy, what made you change your front drive hub? What was the problem?
@DarkDragonWing
10 жыл бұрын
Oh nothing just thought that the wheel hit the curve, the hub must got bent too.
@seresa1983
7 жыл бұрын
I hit a curb as well and my passenger tire wont turn like my other tires would.. i bought a new lower arm cuz it was bent.. bt when i turn my wheel it makes a clocking sound.. so im trying to figure out whats making that clicking noise
@DarkDragonWing
7 жыл бұрын
Could be the sway bar links.
@DarkDragonWing
11 жыл бұрын
Please help me win a lottery, man. :D
@delly8623
10 жыл бұрын
Hey man I like your video,I have a question I recently install coilover But everytime I hit little deep bump or dip it make a popping noise from the front. It sound like metal to metal any tips I should check at it? Bc coilover lancer gts
@DarkDragonWing
10 жыл бұрын
Could be the inner and or outer tie-rods.
@ZionOngCH
10 жыл бұрын
hey The DarkDragonWing , whenever I go through some little holes on the road, I can hear metal knocking sound on my driver side. which part of the wheel contributes to that sound? just name out all the possibility! thank!!! (installing 4 struts and inner tie rod end next week when my parts arrive)
@DarkDragonWing
10 жыл бұрын
Ok, it could be the strut or the control-arm or the sway bar or missing sway bar link(s)
@ZionOngCH
10 жыл бұрын
The DarkDragonWing just bought the control arm. you seem to be right after some readings. I hope it will settle the noise!
@DavidGomez-ov4ib
11 жыл бұрын
Hey mackey have u came across any halo headlights for your lancer?
@rehlek
9 жыл бұрын
"On today's episode of unnecessary replacement of parts!"
@DarkDragonWing
9 жыл бұрын
haha good one
@Leidy101985
11 жыл бұрын
Buenos dias, e visto varios videos de usted, y me gustaria saber si es posible aplicar estas reparaciones en el Lancer Cedia GDI, seria de mucha ayuda, gracias por los videos
@iiMViruZ
11 жыл бұрын
She's in love ^^
@midnitebo
5 жыл бұрын
You should have had the weight on the suspension before tightening the bushing bolts on the control arm.
@katherinetupalow4321
6 жыл бұрын
My car was broken into and the ignition lock cylinder was destroyed but for some reason I can't get the new one to install I've tried two so far now I'm trying to grind it to fit I don't get it it's the same lock cylinder any suggestions?
@DarkDragonWing
6 жыл бұрын
I would let the locksmith do it for me.
@DarkDragonWing
11 жыл бұрын
oh that was the other side.
@stevenayala2407
11 жыл бұрын
I think a body kit Wuld be nice
@piratealumni03
7 жыл бұрын
Hi Mackey, I have a 2005 Lancer ES, and it seems when I drive and let go of the gas pedal I hear a rumbling sound. But when I step on the gas pedal again the sound disappears. Does that mean my control arms are bad/worn/damaged? Any advice will help. Thanks!
@DarkDragonWing
7 жыл бұрын
That could be the brake pads, or the calipers need to be lubricated. Is it shaking? If so you will need to get your front wheel balanced.
@piratealumni03
7 жыл бұрын
brake pads are new, calipers are lubricated amd the wheels are balanced. its a klunking sound and yes its shaking.
@baweralp6013
7 жыл бұрын
Cas q
@md5hash932
11 жыл бұрын
Didnt the axel got pulled out??
@DarkDragonWing
11 жыл бұрын
haha alright cool
@nadinegallero8126
9 жыл бұрын
can this procedure be done in a mitsubishi eclipse rs 2004?
@DarkDragonWing
9 жыл бұрын
nadine gallero I'm not sure
@nadinegallero8126
9 жыл бұрын
It's all good man! Thanks a lot tho. I'll be working on my car soon and I'll be doin the same thing. Hope it's the same..:)
@DarkDragonWing
9 жыл бұрын
Good luck!
@juanvelasquez566
8 жыл бұрын
Wassup Makey when you added the hub did you change the bearing as well?
@DarkDragonWing
8 жыл бұрын
+Juan Velasquez No, I didn't, here I changed it in this video: kzitem.info/news/bejne/qZqBz42Yo5GnrGk
@josuealvarez354
5 жыл бұрын
Where did u buy the rims
@702xRyder
11 жыл бұрын
where can I send you a picture of my lancer I wanna show you it's 02 es it's clean I think you would like it
@donathanleon692
10 жыл бұрын
BTW my mission this weekend is to spray my calipers Lancer Fix | Red Calipers, Polish Headlights, 180km/h - Ep.17 and shin my lights.
@WhosMega
11 жыл бұрын
How come the car is breaking a lot?
@giovanniperez9307
9 жыл бұрын
How can i fix the rear camber since the stock camber arms are not adjustable
@DarkDragonWing
9 жыл бұрын
I have no idea
@GG-jm6gi
8 жыл бұрын
+Giovanni Perez BUY updated after market parts. seen a few if you look around
@evan937
9 жыл бұрын
So how much did the control arm cost you. That sucks that you paid 900 to have the other one changed at a shop.
@DarkDragonWing
9 жыл бұрын
Evan93 It cost me $35 for the control arm in this video. Also, if I change the front axle, it would cost me only $50. So it should have cost me $85 instead of $900 if I have done it myself. But.. it was just one of those unlucky days.
@namjanamja747
9 жыл бұрын
+The DarkDragonWing where did you buy the control arm?
@DarkDragonWing
9 жыл бұрын
wut wat www.ebay.com/itm/PAIR-2-FRONT-LOWER-CONTROL-ARMS-AND-BALL-JOINTS-/191387193744?fits=Year%3A2002|Model%3ALancer&hash=item2c8f90d190&vxp=mtr
@xxar080xx
9 жыл бұрын
Again lol where did you purchase the bearing online or store?
@DarkDragonWing
9 жыл бұрын
alex ramos Online
@teraguy
7 жыл бұрын
พี่มีคลิปถ่ายน้ำมันเกียร์ไหมครับ
@DdgeShelby
4 жыл бұрын
Great video Maggi. I'm about to do both lower control arms and CV axles in my 02 Lancer ES. It's a little rusty tho. I'm not looking forward to it. 170k miles on a Minnesota car. How many miles are on yours? Does your car see winter time driving?
@DarkDragonWing
4 жыл бұрын
This one is about 180k miles on a Minnesota snow and salt car. In some cases, the axle may be impossible to be removed from the knuckle by simply hammering on it. In that case, you can take the whole assembly to the shop and have them separate the axle and the knuckle using a high temp torch and a hydraulic press.
@namjanamja747
9 жыл бұрын
you said you paid 35$ for the control arm. where did you buy it? and are they good quality?
@DarkDragonWing
9 жыл бұрын
+wut wat They're pretty good. www.ebay.com/itm/PAIR-2-FRONT-LOWER-CONTROL-ARMS-AND-BALL-JOINTS-/191387193744?fits=Year%3A2002%7CModel%3ALancer&hash=item2c8f90d190&vxp=mtr
@GG-jm6gi
8 жыл бұрын
+wut wat uhh i bought mine for 35 from oriley's auto parts ball joint was going to be 20 then the guy said might as well get the whole thing because it had new bushings.
@kevinnjenga3060
8 жыл бұрын
hi, good stuff. what's the size of those rims and the tire profile...?
@DarkDragonWing
8 жыл бұрын
Watch this one, and look in the description. cheers kzitem.info/news/bejne/lXturKpvr3-ji4o
@tunnut086
11 жыл бұрын
อ๋อครับ ผมจะรอดู :D
@oki885
5 жыл бұрын
My car Mitsubishi Lancer 04 MT idle speed gauge 2000 help
@settawitjujaiboun3465
9 жыл бұрын
ครับ
@abdulrahmanamjad8245
8 жыл бұрын
at 2:08when mackey hit the hammer there is a spark
@MatDaSilvaa
9 жыл бұрын
WHATS WITH THE NAIL VANISH?
@DarkDragonWing
9 жыл бұрын
MatDaSilvaa I know.... My friend(a girl) painted it for me, she was bored.
Пікірлер: 198