Thank you very much for your video, it is simple and perfect to understand. That's exactly what I needed. Recently my rear controller burned out, I ordered new controllers that I was told would be the new version 2 model, which comes equipped with the TF-100 display. I bought turn signals that have brake flashes and I would like to add the brake light from a mercedes and give me a night light as well. I would like to ask you how many devices I can connect with just one cable that comes out of the controller for the brake signals, and how can I do that, since the voltage of the lamps is the same but it won't have enough power to power all those lights... Thank you for teaching me with all your videos
@Desert-Ecruising
11 ай бұрын
Keep in mind the brake lights line only comes on when you pull one or both brake levers. If the lights you add are LED, it likely will handle a few extra as LEDs generally don’t draw much power.
@pedrogoncalves597
11 ай бұрын
You are a genius, thank you very much
@user-vv3hj1wm5s
6 ай бұрын
Thenks
@marcopeixoto85
4 ай бұрын
If you buy a display with 6 pins, it works
@rokz8309
3 ай бұрын
Need explanation with headlight switch to yunli controllers please
@Desert-Ecruising
3 ай бұрын
3pin male red/blue/black from switch module to 3 pin Female red/blue/black from scoot harness (Octopus cable). 2pin M green/black to left turn signal. 2pin M brown/black to right turn signal. 2pin M with one yellow(may be red on some scoots) and two black wires goes to one of the 2pin F red/black from the Yunli controller harness.
@richardwheatley2352
2 ай бұрын
Is there anybody here that knows of any videos that are this easy to follow but just for one rear running motor and the lighting and throttle braking singal lights and horn wiring setup? If anyone can help thank you
@MrGiodude17
3 ай бұрын
Hello , nice info, where do you buy that circuit board for led lights from ? Thanks
@Desert-Ecruising
3 ай бұрын
I assume you mean the LED driver harness for the tail lights and front running lights. I couldn’t find them on-line but I have one I can give you for $20 to cover shipping. If interested, email me: maikemarx@gmail.com. U could also try to email Laotie at: support@laotie.zone
@MrAniVevo
Ай бұрын
Hi, I’m having a problem with my display when I connect the battery I hear baby noise on the alarm, but the power doesn’t turn on on the display. Do you have any idea where it could be the problem?
@Desert-Ecruising
Ай бұрын
Email me and I’ll try and help you. maikemarx@gmail.com
@simobouryal1604
26 күн бұрын
Hello dear. Where did you bought this led driver harness? I tried to look everywhere but I couldn't find it.
@Desert-Ecruising
22 күн бұрын
They came with the scoot. I have an extra one if you’re interested since I removed mine: maikemarx@gmail.com
@simobouryal1604
22 күн бұрын
@@Desert-Ecruising ok thank you I will email you
@RgbWave
11 ай бұрын
hey, im trying to connect the yunli controllers on my laotie es19, do i have to change the p settings after plugging everything?
@Desert-Ecruising
11 ай бұрын
I haven’t installed mine yet in my ti-30. Want to test the stock ones first so I can compare the difference. Probably will be another month or so. However, with the controllers and display all being swapped, you definitely need to check the P settings. It should be functional without doing that but maybe the speed setting might not be set for 100 or full speed etc. once I swap mine I’ll do a video on the hookup and p settings.
@RgbWave
11 ай бұрын
@@Desert-Ecruising Im asking this because i burnt 2 controllers 🥹, the laotie support team sent me 2 videos and i followed the connections right, i just didnt check the p settings, i didnt change the magnets settings etc, so idk what was the cause, i will wait for one of your videos in case you change to yunli controllers
@Desert-Ecruising
11 ай бұрын
I do have the yunli controllers and will definitely be installing them and doing a video. There is nothing in the P settings that could cause you to burn the controllers regardless of the settings. The magnet setting does nothing more than adjust the displayed speed and mileage on the display.
@RgbWave
11 ай бұрын
@@Desert-Ecruising thank you!, i will be waiting then
@Desert-Ecruising
11 ай бұрын
@UnboxWave For reference, if you don’t mind, send me those videos from Laotie. maikemarx@gmail.com
@davecherry-tree9294
11 ай бұрын
Muchas gracias por tu tutorial explicativo.¿Que ocurre si le coloco al ti30 un converter DC-DC 60V-12V-5A max para ue todo el circuito electrico funcione a 12?.¿tendria que anuar alguna placa de circuito del tentaculo de cables?..yo creo haber visto en algun video de "pirate" escooters donde al colocar un converter identico crei aver comprendido que se tenia que anular esa placa circuito plana..Te lo pregunto porque estoy en ese punto donde le puse todo tunig y ahora es momento de conectar todo y me falta tener claro ese punto. En el video e "PIRATE" no se ve claro ni el como ni el donde..¿podrias hacer un video explicativo dobre este asunto?.gravis por tu canal .pasa un buen dia
@Desert-Ecruising
11 ай бұрын
The flat circuit board is not a converter, it’s just a distribution board. The stock lights all run off of the battery voltage. Yes you could connect up a dc to dc converter to run some other 12v lights. I installed a dc to dc (5v) converter to run some RGB LED lighting on mine. Just connect the dc to dc converter input to the same place as the input to the lighting cable (orange/black 2 pin female) as shown in the video. Make sure the dc to dc converter can accept an input up to 67.2v which is the battery voltage when fully charged.
@kierankindle4507
11 ай бұрын
If my scooter is 35ah controllers is it ok to get a 25ah battery?
@Desert-Ecruising
11 ай бұрын
Yes, that’s two different, unrelated things. The controllers are rated in Amps “A” and a 35A controller will push a max of 35A to the motors. The battery is rated in amp hours “Ah” which is just the capacity of the battery. The bigger the Ah rating, the more capacity the battery has. Think of it like the gas tank in a car. A bigger tank gives you more range.
@kierankindle4507
11 ай бұрын
Ok thank u 🙏
@Gumis2323
10 ай бұрын
Witam mam pytanie o kontrolery. Czy lepiej działają niż oryginał? Oryginalny jak dla mnie działa tak 0 albo 1, brak płynności podczas dodawania gazu. Czy nowe kontrolery działają lepiej? Bardzo proszę o odpowiedź
@Desert-Ecruising
10 ай бұрын
I have not yet installed the Yunli controllers but they are supposed to be more linear since they are sine wave controllers. I’m testing out the stock controllers now and will swap them out in a few weeks.
@Gumis2323
10 ай бұрын
Myślałem że masz już zainstalowane nowe kontrolery sinusoidalne, dlatego pytałem. Aktualnie jest spora obniżka na banggood. Prawdopodobnie kupię je ...
@Desert-Ecruising
10 ай бұрын
@@Gumis2323I have them but have been modifying the scoot since I got it. Have only ridden it one time. Want to test the stock controllers awhile before I swap them so I can compare the differences.
@Gumis2323
10 ай бұрын
Dzisiaj zamontowałem nowy sterownik.... Działa lepiej niż oryginalny, na razie testuję. Reakcja na przepustnicę jest opóźniona, dziwne uczucie puszczasz akcelerator a hulajnoga dalej jedzie... Nie wiem jakie mają być optymalne ustawienia P- setings, Jak masz jakieś porady proszę o pomoc
@laurentiumartian1470
3 ай бұрын
Hello. Can you help me connect an alarm on my electric scooter?
@Desert-Ecruising
3 ай бұрын
What scooter do u have?
@laurentiumartian1470
3 ай бұрын
@@Desert-Ecruising angwatt T1
@Desert-Ecruising
3 ай бұрын
Did it come with an alarm module?
@laurentiumartian1470
3 ай бұрын
@@Desert-Ecruising yes. The supplier said yes.
@Desert-Ecruising
3 ай бұрын
I don’t understand. It came with an alarm module installed but it doesn’t work? Is that what you mean? You can email me at: maikemarx@gmail.com
Пікірлер: 38