Joshua, Love your channel. I believe i'm a better woodworker cause of you. Thanks for sharing.
@WoodAndShop
4 жыл бұрын
Ah, thanks for the kind words. Glad it's been helpful!
@insanusvir
2 жыл бұрын
This is the clearest and best explanation I have seen on dovetail layout. I have gone back and watched others again and they are easier to understand. Thank you
@CinkSVideo
Жыл бұрын
I’ve watched this process many times but yours is the first time I’ve seen the steps so clearly explained.
@ingwiefreak
4 жыл бұрын
Ive seen lots of videos on this technique and yours is the most clearly explained .
@WoodAndShop
4 жыл бұрын
Great to hear! Yeah, this skill is usually hurried through in a full tutorial, which is why I wanted to focus in just on this part.
@vernonraines3002
2 жыл бұрын
Thanks. Answered a lot of question.
@timothymallon
Жыл бұрын
That's just about the easiest way I have seen to layout dovetails. Thank you!
@chriscorley7034
4 жыл бұрын
This is one of the most practical easy to understand no nonsense approach to beginner dovetail work. Thank you, you are really making better woodworkers.
@einsteinbpc
2 жыл бұрын
You blew my mind with the spacing. And thank you so much for throwing the angles out the window. We overthink things too much these days rather than just making.
@znoot
4 жыл бұрын
"Do what looks good." Thank you. So many people always put up those rules, like you have to use 1:6 for soft woods and 1:8 for hard woods. I always use somewhere around 1:6 so around 9°, and i've never had hard wood split or anything like that.
@MermaidMakes
10 ай бұрын
It’s gatekeeping! Every craft or art has people like that in it. You just do what works for you. My husband and I recently built a fiddle and broke a lot of the erroneous rules. It works and sounds awesome, but we didn’t have all these expensive tools and things they tell you that you need. We didn’t use the highest quality wood. We didn’t have any fancy gadgets. We just did it for fun, and that’s all that matters!
@cds957
7 ай бұрын
Great video sir, it's nice to watch your site without a lot of hype...thank you.
@DH-ry2ho
6 ай бұрын
Such a great teacher. Thank you!
@The78bluedevils
4 жыл бұрын
Thanks, you made it look so simple .
@WoodAndShop
4 жыл бұрын
You're welcome Tony!
@animeclips7232
4 жыл бұрын
Thank you for sharing your knowledge, it is indeed very helpful for me and I am following these ways.
@Arco326
3 жыл бұрын
Love the way you organized the pins...no fuss... easy to do...
@HansHoffmeister
2 жыл бұрын
best layout explanation I have seen, thank you so much!
@richardsilva-spokane3436
7 ай бұрын
Excellent video! You explained it so simply 👍👍👍
@ronhau1542
Жыл бұрын
Okay, I’m about to start trying learn this and layout is what I wasn’t following. I can follow this. TY!
@prspastor
4 жыл бұрын
Perfect! Thanks for this great lesson.
@WoodAndShop
4 жыл бұрын
You're most welcome!
@ryanallthewiser
3 жыл бұрын
Great and easy to follow video Joshua.
@tworiversworkshop6111
Жыл бұрын
Very good, thank you!
@horncraftindiawoodenhandic6055
4 жыл бұрын
Good way of explaining your work
@WoodAndShop
4 жыл бұрын
Thanks!
@skippylippy547
6 ай бұрын
You made that look so easy! Very nice video. Thank you.
@chriscunicelli7070
4 жыл бұрын
Great! Thanks Josh.
@kevbishupstate2115
3 жыл бұрын
Just found your channel one video and had to subscribe I believe I will be learning a lot from you 👍
@Rich32262
2 жыл бұрын
If you haven't already, get yourself a mechanical drafting pencil. When you want more graphite it comes out in shorter increments and therefore it doesn't break as easily. I paid about $10. wouldn't consider going back to the cheap ones. Great instruction as usual.
@ikust007
4 жыл бұрын
Clear and clean explanations. Thank you ! God I love those Moravian benches
@WoodAndShop
4 жыл бұрын
Thanks! Come by and try a Moravian Workbench out sometime!
@ikust007
4 жыл бұрын
I bought the video you made with Mr. Myers:)) this is my DREAM bench . Can’t wait to start it. There is something about it that I love that I can’t explain. Btw: did you make a video about the Moravian step stool!!? I live in Quebec .. it’s a bit far for a weekend :((
@WoodAndShop
4 жыл бұрын
@@ikust007 Cool! Yeah, it's my favorite style of workbench, because it's sturdy without being heavy. Yes, I made the video about the Moravian Footstool. Well, you can imagine that you're here in the school!
@ikust007
4 жыл бұрын
Wood and Shop The video is for sale ?
@ikust007
4 жыл бұрын
Wood and Shop I am looking on your site to find the Moravian footstool: love the angled legs
@kevindowd7769
4 жыл бұрын
Excellent Video... Thanks!
@WoodAndShop
4 жыл бұрын
You're most welcome Kevin! Would you mind subscribing to my channel?
@thewoodlesworkshop.157
4 жыл бұрын
Very useful video ... Thank you. Take care of yourself and good luck.
@WoodAndShop
4 жыл бұрын
Thanks!
@mrbotak9011
3 жыл бұрын
Tq..best explanation..
@johnroth8275
4 жыл бұрын
Thanks. Very helpful.
@WoodAndShop
4 жыл бұрын
Glad you liked it!
@sawyerphillips9493
9 ай бұрын
This was a great video, I'm definitely going to use this technique. How do you layout the other piece though?
@philstevens6934
3 жыл бұрын
Excellent video. I have always laid out pins first. I would be interested to know why you start with the tails. Many thanks.
@walterrider9600
4 жыл бұрын
thank you
@WoodAndShop
4 жыл бұрын
You're most welcome Walter!
@andrewooddotcom
4 жыл бұрын
Thanks for video :)
@WoodAndShop
4 жыл бұрын
You're most welcome!
@bradiannantuono8225
4 жыл бұрын
Thanks somehow I could not get my mind around how to measure them out.
@WoodAndShop
4 жыл бұрын
No measuring required! Just pull out a board and try it, and it'll make sense to you.
@distortedodin
8 ай бұрын
This showed up in my KZitem list. I know it's older...but still well done. Unfortunately the link to the dividers is not working. Does anyone have a link to one they use and like, please?
@MRrwmac
4 жыл бұрын
Well explained and demonstrated. I’ve done dovetails but still wonder if it’s more the ascetics than the strength (because of the better glues today) that make them so appealing to us woodworkers?
@WoodAndShop
4 жыл бұрын
For me it is definitely aesthetics, but also strength. There aren't any stronger joints for holding cases together. But funnily enough, dovetails used to be seen as provincial, so higher society would have them hidden. Here's another one of my videos that shows this: kzitem.info/news/bejne/wqB9mGp3iWiGlWU
@markjohnston7172
4 жыл бұрын
MRrwmac Historic hide glues were just as strong as the glues used today by furniture makers.
@edvaldolopesferraz1109
4 жыл бұрын
Muito bom!
@mrferris4379
4 жыл бұрын
Would of been good to have mentioned the 1-6 (mark 1 up from a edge 6 alongside and match the 2 points to find the angle)for softwood or fast grown or 1-9 for hardwood or figured as a general guide line though I have found very little need to worry about it except in maybe draw fronts or where a lot of stress will be exerted.
@FrissOderLassEs
3 жыл бұрын
7:40 In my head I hear: 'I usually don't break the tip off that often, since I really like a pencil, but this is just for demonstration purposes"
@FredoJ
4 жыл бұрын
Hi, I liked your video... I was just a little nervous when you used the beveled square with the tip upwards, when usually one tends to lean our face and eyes towards the layout
@WoodAndShop
4 жыл бұрын
Yeah, it's like an 18th Century execution tool!
@DonsWoodies
10 ай бұрын
I don't understand why the end cuts are called half pins. The actual pins are smaller than the "half pins".
@ot9180
4 жыл бұрын
Hope everything’s good, it’s been a while.
@MrAmisto
4 жыл бұрын
Wish you would show the other half of the job, creating the connecting piece, so if the measurements are kept the same, the other piece will fit? Does it not have to be cut in reverse? Why not do the rest of the video for inexperienced wood cutters. This leaves many questions...
@WoodAndShop
4 жыл бұрын
Because there are a ton of full tutorials on KZitem on making the whole dovetail joint...including my channel and website. This specifically shows how to lay out the tails in a uniform manner.
@DeeegerD
4 жыл бұрын
You're the second guy I've watched use the step method to divide the tails. Wouldn't it just be quicker to measure and divide by the number you want, then set your divider to that measure?
@WoodAndShop
4 жыл бұрын
Nope, not for me! It really only takes a few seconds to do it this way.
@przybyla420
3 жыл бұрын
What about the half pins...
@StrateLaceD
3 жыл бұрын
you dont show pin layout
@przybyla420
3 жыл бұрын
cut the tails, tidy them up with a chisel and then mark the pins directly from the tail board with a knife and then use a small square to make connect the line from on the end grain down to your baseline.
@goldendogwoodworks6675
4 жыл бұрын
thank you, but i must give you one complaint. I am not searching everywhere for vintage tools. Thanks for the fun.
@WoodAndShop
4 жыл бұрын
Most of the tools I listed are brand new
@GUYV3RZ3RO
4 жыл бұрын
Disrespecting Frank that way just cause me to completely ignore your videos. Good luck
Пікірлер: 79