E02 can be fixed by changing the filter, but if the error is persistent, you’ll usually hear the filter pump grinding, which means the lime scale is interfering with the flow of the water thru the heating unit. Best way to fix is to remove the pump from the tub, then run a garden hose thru the inlet to flush out the scale. Lay the unit on its side with the inlet and outlet pointing up. Then pour in some white vinegar and let it sit overnight. That should break down some of the scale that’s blocking the water flow. Flush out the vinegar with hot water, then run the garden hose thru the system again. You can then reconnect to the hot tub and see if the e02 clears.
@stuartbrown5136
3 жыл бұрын
Also I found that the flow sensor magnet de magnetises after a while so I turn it on and just as I hit the filter or heat button I use a small strong magnet on the front part where the water flows out and has worked a treat for months now
@kellyfletcher3593
4 жыл бұрын
Thank you! All fixed ❤👍🏻
@stevenbell7902
5 жыл бұрын
Also remove the outlet that you were cleaning to clear the inside. This can get full of white deposits.
@roberthomer6209
5 жыл бұрын
Steven bell this is the Paris model, the outlet does not unscrew unfortunately, you can poke a cocktail stick through the holes though which also helps
@stevenbell7902
5 жыл бұрын
I think you will find that they do. Although mine is a Vegas model, that kit will all be the same.
@louisekjellberg3101
2 жыл бұрын
Long shot but I really hope you’ll answer. How am I supposed to get the outlet removed? I’ve tried but it seems to be stuck. How do you remove yours?
@stevenbell7902
2 жыл бұрын
@@louisekjellberg3101 I just unscrewed the top one but even I didn’t manage to remove the bottom fitting
@katienolasco5789
4 жыл бұрын
Do you know where or what the “filter sensors” are? I’ve been troubleshooting everything I can on the E02 message, and think it’s getting down to that, but can find nothing on them other than brief mention in the manual troubleshooting guide.
@MartinBannister
3 жыл бұрын
Hi. Do you know how to attach the best way vacuum? Can seem to get it to fit anything!
@dackombe1
4 жыл бұрын
My word you’ve stopped a lot of swearing and moaning on my part.My neighbours will be pleased.Many thanks
@lpatterson5005
3 жыл бұрын
I have a new lay z spa vegas hot tub with freezeshield technology it worked for a few days but then the eo2 error came on. Outside in the cold about 2 degrees c it comes on and won't go off but when I take it in the house and its warned up the eo2 disappears the pump is supposed to be made for colder weather can anyone help please??
@jaytol1
4 жыл бұрын
Stop putting so much chlorine in it chokes your heater element up and damages seal and most parts in the pump, anybody need advice i repair these and sell all parts.
@rickorider
4 жыл бұрын
Thanks...how do we contact you for parts etc?
@jaytol1
4 жыл бұрын
@@rickorider i sell on ebay hottubparts17
@rickorider
4 жыл бұрын
@@jaytol1 Thanks..will.have a look
@rickorider
4 жыл бұрын
@@jaytol1 Cannot find you on eBay under hottubparts17. Any other way?
@rickorider
4 жыл бұрын
@@jaytol1 It's ok have found you!
@pamelapaquette4916
4 жыл бұрын
Thank you so much it works
@roberthomer6209
4 жыл бұрын
Pamela Paquette no problem, keep that part clean regularly and you won’t have problems 👍🏻
@Lullabyhaven3
5 жыл бұрын
Help!!! My jets work, heat works, but it's not filtering water anymore and they're clean and no blockages???
Пікірлер: 31