Great instructional video! Concise, yet thorough, with good commentary. Anyone watching should have absolutely NO problems working with one of these carbs!
@hansguthrie5153
6 жыл бұрын
Super helpful video! My Toro snowblower wouldn't start because the fuel jet was completely clogged. I was able to get it running in one evening thanks to this video.
@nathanmitchell493
5 жыл бұрын
Thanks for the video. Used it to clean the carburetor on my snowblower and now I'm ready for winter.
@ombuild7727
7 жыл бұрын
Thank You, after 2 years of letting my snowblower sit this six min video video fixed the problem!!!!
@sydneywithers7067
6 жыл бұрын
Excellent Video. This is my first time dealing with a small engine carburetor and your directions are very clear and concise.
@josepheblack
10 жыл бұрын
MrPuttputter. I must say Thank You. I broke my carb down and found my jet was clogged. You're the MAN!
@bobbymiller2951
8 ай бұрын
Great video, You forgot about the plastic jet on top., The one under the plastic idol screw. That thing usually gets clogged up., And where the fuel line hooks., You can pull that Chrome thing off., And clean the screen that is behind it., I am no expert., I was given A. Snow Tech, That's like brand new., It's like a burn find., And the carburetor had stuff growing out of every area., So I am just now learning., And I have learned a lot., From these amazing KZitem videos., I still ended up buying a $14 carburetor off of Amazon., Put it on and it worked perfectly., But I really do want to put the original back on., Just to see if I did it., I put it on and off about 16 times, And it would run a little better every time., And right when I was going to clean it one more time., The Amazon truck pulled up.😂 Anyways, thank you for the video., And since today is Christmas Eve., Merry Christmas. Bobby Miller Detroit.
@piotrsipika2493
3 жыл бұрын
Thank you! Was able to take my ltc carb apart and verify it’s up to snuff. Respect!
@dakewlndn
7 жыл бұрын
Thank You soo much for this video It got my push mower back up after cleaning the carb several times using different videos. This was the one I should have watched first!! Saved me time and money!! You are Awesome!!
@CMC5961
6 жыл бұрын
One of the best videos teaching people how to clean the carburetor on LCT engines!
@scubby1080
5 жыл бұрын
Awesome video! Following your process and especially spraying the idle circuit like you demonstrated totally fixed by 1/4 choke/surging issue. Thanks!
@kenlucas1016
10 жыл бұрын
Excellent video, very clear and concise...thanks it saved me time and money!
@barryconner5004
7 ай бұрын
Excellent video, thanks
@robertomendez701
8 жыл бұрын
great video thanks for explaining so clearly!
@mariolamarre543
5 жыл бұрын
Thanks for being so clear , you should be a teacher!
@silverstar4289
Жыл бұрын
Outstanding. Anyone should be able to work on their carburetor with this. I have a 208 on a 30 ton splitter. Carb is acting up now. I suspect a good cleaning will do it. New carburetor is around seventy dollars for these
@jonienglish3231
6 жыл бұрын
Good Video i have a Briggs 15c107-0014-f8 snow engine 250cc very similar cleaned the main jet and emulsion tube 3 holes plugged now unit surging at idle took apart carb again soaked main body in CLR then soaked in Varsol 8 hrs blow out passages with compressed air running better
@lostjalopygarage8150
6 жыл бұрын
Thank you. This video is a big help!
@davidrollheiser2344
6 жыл бұрын
Very clear, with a good video also. Thanks. How about a 'how to adjust this model carburetor '?
@IremiaGreece
6 жыл бұрын
Saved me! Thank you sir
@kdeltatube
6 жыл бұрын
great job, thanks!
@jamespowers2848
6 жыл бұрын
Thanks. Worked like a charm
@fyrfox2000
3 жыл бұрын
Good video thanks.
@jimskorupa2614
7 жыл бұрын
Did what you said and seems to have worked. Thanks. One thing I noticed that in the carburetor bowl the coating in there is coming off. It was very corroded in there and I wiped it out. I noticed little teeny specs of it they were peeling off the sides. Noticed the color was missing off of most of it inside so it's obviously going through the system I Bet that contributed to clogging it up. Have you noticed that? I wonder if it's a flaw in the manufacture of it.
@philjerome9795
5 жыл бұрын
Regular carb cleaner will destroy the bowl gasket if you leave it on. There is a special cleaner for small engine carbs.
@PaulSikkema
10 жыл бұрын
I have one question, the engine on MTD products is a PowerMore brand. The LCT engine is used on Husqvarna, Ariens AX and Snow Devil. The two brands do not use the same parts. So my question is, did you take this carb off of a Powermore engine or an LCT?
@nicktobey1004
7 жыл бұрын
Paul Sikkema well played
@tech45
7 жыл бұрын
LCT bought Tecumseh tooling!
@PaulSikkema
7 жыл бұрын
No, Please research this. Lawson power which owns Tecumseh is not part of LCT.
@tech45
7 жыл бұрын
you say potatoes i say potatoes
@mrbriggs68
6 жыл бұрын
Paul Sikkema tecumseh bought out Lawson in 1956 and Lct is a new version of tecumseh
@garydeimer3592
3 жыл бұрын
Great video...question...if the carb leaks gas through the throat after shutting the engine off are there vent holes that are blocked?
@MRPUTTPUTTER
3 жыл бұрын
No I’d say that the needle and seat are leaking Possibly from a bad needle or even a bad float
@dgficklin8830
6 жыл бұрын
I have one of these on a 208 CC Yard Machine rear tine tiller. I have cleaned the carburetor in a soaking cleaner with basket. I couldn't get a new needle and float locally, but decided to put it back together because it didn't look too bad. Engine starts on choke, runs off choke, idles, and runs at operating rpm but shuts down as soon as any load is applied. Too much throttle opening also shuts it down. Will not start without choke even if warm. I think the float level may be too high, but that doesn't explain the need to choke it. I'm stumped.
@chancesanborn7932
7 жыл бұрын
why does everyone forget about the idle jet?
@teamslaiyans3808
5 жыл бұрын
Great vid ! What are you spraying in that Carb ?
@katpis9121
7 жыл бұрын
Have a quick question. I have a sno tek 24". It was running like crap so I followed this video cleaned the carb good as it was very very dirty. Started up and runs amazing. But I did notice my idle was very very high. Is this normal? Does the adjustment screw near the throttle arm allow for the idle (or operation speed) adjustment? My black screw is backed almost flush with the carb housing
@brianwhitehouse8380
Жыл бұрын
I have the same question. Did you ever figure it out?
@robertomendez701
8 жыл бұрын
question my sno-tek wont start unless you put a little gas in the plug. Any ideas?
@kimmerzl194
9 жыл бұрын
"MrPuttputter, Can you let me know if all jets are removal, I notice my LCT carb will not come loose.
Пікірлер: 45