Lol. I've maneuvered into a harrier trying to land a twin engine plane for the first time. I didn't even know it was a maneuver. I can now say though, harrier with twin engine is super stable
@Gavinfootball734-vlogs
Жыл бұрын
Then you’re pretty good at landing
@justaguy8841
Ай бұрын
Thanks for posting John, that was a great video and I learned a lot!
@SteveGergetz
8 ай бұрын
Dang man, you can fly! But more importantly, I really liked the simple, straight-forward, no-frills, no-stupid music, clear explanations of HOW to do various maneuvers. Thanks! I subbed.
@TwoBrosRC
8 ай бұрын
Oh, you'll probably hate our new vids then. We use music extensively to set the mood, but it shouldn't be too overbearing. Appreciate the view, and hope you'll stick around!
@timelewis
2 жыл бұрын
Thanks for these training videos. Get well soon!
@SteffenRC
2 жыл бұрын
Jon, Outstanding instruction. Always appreciate you videos and learning what is possible with the right setup and technique......
@monchichis333
Жыл бұрын
I love flying in wind, once you flow with it, you just feel like you're surfing in the air. I also live in a valley in southern california, so the wind never stops. I got mad practice and stick time by just easing into the wind.
@TwoBrosRC
Жыл бұрын
That's the right attitude to have!
@jive7777
2 жыл бұрын
Great job again, Jon! Thanks for the tutorials, very helpful and informative. Love those knife edge spins! I had my Extra 300 out today, went well. Not much for 3D tho, as I am too nervous to try much😆 In Real Flight 9.5s, I am a master at hovering and torque rolls. In real life, I don't have much luck. I'll keep trying. Thanks again for all the fun content!
@madatthesky7588
Жыл бұрын
You are just as good and capable in "real life", you just need the confidence to do it
@Technicallyaddicted
3 ай бұрын
Holy crap I’ll never doubt your ability again. Bro my bad. On another video I commented that you had no skill or something like that(I don’t even remember context). Boy was I wrong. Thanks for this info 🤴. Pro tip for anyone who needs it: If you get confused when coming towards you, imagine a little model of your plane on the right stick. It’s going to mimic that imaginary model regardless of direction.
@OaklanAaron
Ай бұрын
The dude is a pretty sick RC pilot. He is my favorite pilot to watch
@procatprocat9647
10 ай бұрын
Great video. I used to fly 3D and would like to start gentle rc flying again. Unfortunately, as an alcoholic, my coordination and general loss of abilities make it impossible. Enjoy it while you can !
@alanjust
Жыл бұрын
Just the video I’ve been searching for. Awesome step by step instruction in clear non technical language. Thank you John.
@stevenpaulin448
Жыл бұрын
So impressive. I can't imagine how much time, over how many years, that it must take to get this good. You fly so many planes so well, too. Stumbled over the turbo timber on floats video first. Subscribed and watched many more, in awe. How often do you fly on a weekly basis?
@TwoBrosRC
Жыл бұрын
Thanks Steven! I've flown full scale simulators and arcade flight games since I was a kid - I'm 38 now. I only got into hobby grade radio control in August of 2020. January of 2021 is when I decided to stop wrecking Timbers and do almost anything without crashing. That was a long learning curve of flying almost daily for six months. I only fly once or twice a week at most these days. A lot of the content you see on the channel now was shot a week in advance, minimum.
@HORRUS29
9 ай бұрын
I've been flying since I was 16, I'm 41 now and loved this video. My cousin taught me to fly and he built all my planes. He recently passed and now I'm trying to learn to build them myself. Could you do a video on how to set up the electronics inside the plane? Such as where all the connections plug into?
@TwoBrosRC
9 ай бұрын
This is a bind and fly model, meaning all the electronics work is done by the factory. Other channels have gone over that process though!
@lesterstanislas5590
2 жыл бұрын
Thanks again Jon.
@A.M.-RC
2 жыл бұрын
Great video! Practice makes perfect but describing what you actually need to do to get started helps a lot, thanks for the video!
@captnjim.
2 жыл бұрын
Great job with this video, I really like the narration. (I also like the play-by-play as you fly but this was great.) I look forward to seeing more in this series.
@GStrauss
Жыл бұрын
Another great video Jon! Thanks! Can u please explain how to do a perfect high alpha? How different it is from the hover going forward?
@TwoBrosRC
Жыл бұрын
Didn't we cover that in the vid for you?
@nathanyoder4312
2 жыл бұрын
I wouldn’t mind u making some more vids of u flying the turbo timber or a similar model of off the water some more! I have watched you wringing out the tte on floats probably 15 times I love it! That’s what I have and have been practicing a lot!
@atomx261
4 ай бұрын
Thank you 👍👍👍👍👍👍👍😂😂❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@TangoOne
4 ай бұрын
I tried a waterfall on my T-28 and it was immediately apparent that it was outside of the Trojans flight envelope.. Also upon trying to complete the maneuver while inverted I was flying with the wind so it also stalled the wing. It plowed into the ground and was a total loss. I'll buy the Extra 300 before I try more 3D
@TwoBrosRC
4 ай бұрын
Yeah, that's not a 3D airframe lol Good on you for trying out something different though!
@nathanyoder4312
2 жыл бұрын
Thanks been wanting a video like this!
@TwoBrosRC
2 жыл бұрын
No problem!
@trondaustad8617
Жыл бұрын
Good video. I start to try this 3d flight so this was very useful for me. Still working on that harrier and 4 point rool . Lot of and plenty of frustration.
@user-ii4ff9bk2l
7 ай бұрын
I feel ya Jon on the CV19! It put me a day away from being in death's coffin.
@TwoBrosRC
7 ай бұрын
CV19?
@lamaranderson3048
2 жыл бұрын
Good vid my guy!
@schraubergott46
Жыл бұрын
love this video, i think this will help me so much with my first 3d test flight :) thank you!
@lamaranderson3048
2 жыл бұрын
What up Jon!? I’m still trying to fix my Fms arctic camo A-10 but the front retract hasn’t been in stock for 30 years… you happen to know of any other front retract that would work for it??? With as little modifications as possible??
@TwoBrosRC
2 жыл бұрын
Buy it off AliExpress. It's probably in stock there.
@hotheadedfilmshhf6734
8 ай бұрын
Great video, thank you. Im sure ill be back time and time again because its impossible for me to retain all of this at once. 😂 one quick question. How much harder are planes like this to fly then ones like the Eratics?
@TwoBrosRC
8 ай бұрын
It's a little harder. More prone to stalling, requires more knowledge of flight - but a lot of it can be mitigated by proper throttle usage. Follow the guide and you'll be OK!
@andrewasdel4230
2 сағат бұрын
Why is inverted harrier flown at much lower AoA than upright? I usually see it that way, as here. With my own plane, if I try for higher alpha in inverted harrier, the plane wants to go into an inverted spin, but idk if that's just a quirk of the airframe.
@TwoBrosRC
Сағат бұрын
It can be flown more aggressively. Just depends on how comfortable you are with the maneuver.
@waynemiller6070
Жыл бұрын
Very helpful. Thanks.
@smacfe
2 ай бұрын
Would you recommend learning to fly in a normal/ precision manner before 3d? Most guys I see trying to fly 3D can’t fly worth a darn and then get frustrated thinking they are a step away from sponsorship.
@TwoBrosRC
2 ай бұрын
Depends on you. 3D skills translate to every other aspect of flight. We learned how to do 3D and can perform precise maneuvers easier because of it.
@austinlangley4539
2 жыл бұрын
Glad to see you back
@derekterry4157
2 жыл бұрын
Thanks for another great Video Jon! I found it very useful. You deserve all the KZitem success in the world.
@juliandevr1
2 жыл бұрын
Awesome what you can do with those models Jon! Im just getting started in the hobby and got my first plane. I find it difficult to keep the throttle at a certain position when steering with rudder. Any tips on that?
@TwoBrosRC
2 жыл бұрын
Practice! Focus on learning to control the rudder while throttle is maintained. It'll be vital to growth as a pilot. Even if it feels weird or uncomfortable, keep working at it. You'll show improvement if you keep doing it.
@Coops777
Жыл бұрын
Great video thankyou!!
@TamiamiParkFlyers
Жыл бұрын
Excellent video!
@ChrisB...
2 жыл бұрын
No idea why this video showed up in my feed, but I have two 3D planes (electric and 4-stroke gas) hanging in my garage that I haven't flown in 10 years. Going to give it a go this weekend if I can get the batteries charged!
@amarinnemesis
2 ай бұрын
Trying to figure out the Harrier setup. Did u remove the AR 631 capacitor installed in Channel 6 and connect the alerón to it to enable the dual aleron for the harrier feature?
Brilliant flying John. I take it you have removed the gyro RX?
@TwoBrosRC
Ай бұрын
Nah, it's flying with it. Thanks
@user-to3ir3wd2t
Ай бұрын
@@TwoBrosRC then how do program both ailerons to raise together. They're both on the same channel aren't they?
@simons6208
Жыл бұрын
Looks another of Fun
@viensonvarouler3351
10 ай бұрын
always remember to get the 3 mistakes high when you're learning it might save you a LOT money
@jasegazzard3743
Жыл бұрын
Hi nice vid, is the cg best slightly tail heavy nose heavy or straight level? Cheers
@TwoBrosRC
Жыл бұрын
CG is a matter of personal opinion - find what works best for your style of flying and go with it!
@burlingtonfilms
2 жыл бұрын
Does your rudder tail wiggle by itself sometimes? Mine wiggles now and it doesn't stop.
@TwoBrosRC
2 жыл бұрын
Move the pushrod in a hole on the servo arm and recenter it. The servo can easily hit a harmonic resonance and flutter until the battery dies if you don't do this.
@herded1932
2 ай бұрын
are the stock servos, ESC and motor good? Also, how much does your battery weight? Is it safe to order it from Amazon? (2x cheaper in my country than local stores)
@TwoBrosRC
2 ай бұрын
The stock equipment is completely fine. No idea on what the specific battery weighs, not sure why ordering from Amazon wouldn't be safe.
@herded1932
2 ай бұрын
@@TwoBrosRC Thanks! Also, with 2200 4S battery, how long flight time can I expect? And is it for one flight, or maybe 2/3?
@SiangHng
5 ай бұрын
How is it both the ailerons are up together with his elevator on harrier? How do you set that?
@TwoBrosRC
5 ай бұрын
kzitem.info/news/bejne/u5Voq4OJe4SmlmU
@SiangHng
5 ай бұрын
Thank you so much. I’ll go check it out…
@SkySurferG
Жыл бұрын
How do you get BOTH alierons pointing up ? Do you have ELE mixed in with AIL somehow ?
@TwoBrosRC
Жыл бұрын
kzitem.info/news/bejne/u5Voq4OJe4SmlmU
@SkySurferG
Жыл бұрын
@@TwoBrosRC Thanks !
@superjusty2336
Жыл бұрын
Where do I get your setups? Just found your channel I love it !! Thanks
@TwoBrosRC
Жыл бұрын
Search YT for "Two brothers extra 300 setup"
@UAV_61
2 жыл бұрын
This is not stock setup, cause you are using spoilerons, right ? How to make spoilerons setup, in which channel on RX need to connect left ailerons and right (Left on channel 2, right on channel 6) ? Thank you.
@TwoBrosRC
2 жыл бұрын
Setup info is in the description. Follow the link to the vid describing what to do.
@shahram677
6 ай бұрын
Did u add any weight to the tail ?
@TwoBrosRC
6 ай бұрын
Nope.
@ryanyoung54
8 ай бұрын
🙌🙌🥳
@old-rcplane-phart
2 жыл бұрын
Perfect 3d bird! BUT, HH has lost their minds on the $$ of the Extra 300! 1st 1 I bought was $329. 2nd was $359. $400 is way overpriced for what little u get. NO avian, pinch hinges (good rudder hinges), cheapo esc, is too much. IMHO! That being said, for $50 more 1 can get into 80mm edf's!🤷♂️
@old-rcplane-phart
2 жыл бұрын
AS much as I love mine, it's rarely flown nowadays.
@TwoBrosRC
2 жыл бұрын
It's still best in class at its price and size. There aren't really any other models this good out there.
@imtherandom1-780
Жыл бұрын
Did you have to change any of the servos for it to move the flaps that much?
@TwoBrosRC
Жыл бұрын
Nope, the servos are capable of throwing that far.
@Boeing767DriverAA
2 жыл бұрын
Get Well Jon
@donalddodier9022
Жыл бұрын
How did you setup the ailerons to both go up? I have been trying with no success. FYI I have an IX12 so I would expect it would be done the same way you have your IX20se.
@TwoBrosRC
Жыл бұрын
kzitem.info/news/bejne/u5Voq4OJe4SmlmU
@waynemiller6070
Жыл бұрын
We got the Extra 300 yesterday. It started raining during radio set up. Looks like I wont be able to fly it for nearly a week. Argh. I'm thinking I'll run it pretty stock at first. I'm interested in the Harrier configuration on your set up video, but more importantly, this plane really should have come with onboard battery monitoring through the transmitter. Is that called telemetry? Sorry, I'm new to electrics. I see that you have set that up, but do I need to swap out receivers to do it? edit: I'm using an NX8.
@TwoBrosRC
Жыл бұрын
You'll need to run a voltage wire to an AR637T or use an Avian 60 amp ESC connected to the stock AR631 receiver to get voltage telemetry.
@DavidParkerMedia
Ай бұрын
Do you use xpo?
@TwoBrosRC
Ай бұрын
Of course.
@akmalmarzuki8660
5 ай бұрын
What brand plane is this??
@TwoBrosRC
5 ай бұрын
E-flite
@mattoprc
2 жыл бұрын
Eflite ultimate 3d or extra 300? Better choice?
@TwoBrosRC
2 жыл бұрын
Extra is a better model in general.
@MWall711
Жыл бұрын
What do you use for expo for your 3D flying?
@TwoBrosRC
Жыл бұрын
About 50% these days.
@maddadbikes
2 жыл бұрын
Do you prefer the extra 300 or ultimate biplane for 3d?
@TwoBrosRC
2 жыл бұрын
Extra, generally.
@bgblindt
Жыл бұрын
Curious what you are using for dual rates on this plane?
@TwoBrosRC
Жыл бұрын
150% throws with 70% expo.
@moschidreamer
10 ай бұрын
2:47 Äh... both ailerons up? How do I do this?
@TwoBrosRC
10 ай бұрын
Look for our setup guide.
@Razor-gx2dq
2 жыл бұрын
I have a UMX Timber X, will learning 3d flight be harder on this plane (because of its size) as oppose to the full size Timber X?
@TwoBrosRC
2 жыл бұрын
Yes. Being smaller makes it more difficult to fly some of these maneuvers.
@Razor-gx2dq
2 жыл бұрын
@@TwoBrosRC well, I guess I'll just have to suck it up and learn, I don't have the space for a larger plane.
@millerrc5829
2 жыл бұрын
@@Razor-gx2dq if you have room for em,a 32 profile plane will be easier for leaning 3D. I’d recommend any of the twisted hobby’s 32in standard series’s planes or if on a tight budget motion rc’s skynetic Piaget will do easier 3D than a Umx.
@WickedMoto
2 жыл бұрын
i want to learn 3d but cant bring mysellf to do it outside the sim.. i doubt myself and dont think i can do it
@TwoBrosRC
2 жыл бұрын
Practice makes perfect. The more you do it, the easier it gets.
@WickedMoto
2 жыл бұрын
@@TwoBrosRC been trying it on the sim for 2 years now and can barely hover and thats 98 days worth of hours just on 3 d
@TwoBrosRC
2 жыл бұрын
Try it up high IRL with a model that's designed for 3D. Sims aren't really that useful for practice.
@jordyb323
2 жыл бұрын
I feel like my CG is too far forward won't stick the nose up enough
@TwoBrosRC
2 жыл бұрын
Use a lighter battery.
@arrobrewer2730
Жыл бұрын
0:38 just dont move the sticks that far. I fly 3D full throws all the time. Only reduce throws to take off.
@TwoBrosRC
Жыл бұрын
🆗️
@SquiggyWigginz
Жыл бұрын
Yea, get all that kid?
@TwoBrosRC
Жыл бұрын
???
@Krash_fpv
Жыл бұрын
Dude rolling harriers are killen me I can't do them fast in high alpha like that I felt like I can't get the throttle control down...I can do them little slower high up in a circle but that's level not high alpha.....shit is roug
@TwoBrosRC
Жыл бұрын
The more you practice the better you'll get at it. Keep trying and you'll get it!
@JohnSolimanMBA
2 жыл бұрын
Is this Kurt?
@TwoBrosRC
2 жыл бұрын
Do what now?
@Bombadil195
Жыл бұрын
Realflight evolution :No help for europe Customers !! we need german , french , spanish , italian speech !!!!
@TwoBrosRC
Жыл бұрын
???
@gabryrc9439
Жыл бұрын
That’s not how you should do 3D
@TwoBrosRC
Жыл бұрын
OK, thanks for sharing your super insightful opinion.
@gabryrc9439
Жыл бұрын
@@TwoBrosRC I am preparing an exam for engineering so I have not a lot of time to reply, my comment was not offensive, after the exam I will explain why I think that this is not the way of doing 3D
@gabryrc9439
Жыл бұрын
@@TwoBrosRC sorry for my bad English btw
@gabryrc9439
Жыл бұрын
@@TwoBrosRC ok I have 5 minutes of break: first of all when you do a snap roll you don’t have to hold up elevator but it’s just a tap and then only rudder and ailerons. Another important thing is to avoid changing rates and expo mid-flight. To master the 3D flight you have to build sensibilities around rates that you use during your entire 3D flight. The harrier should be done without using mix with ailerons but you have to achieve it only by using throttle and elevator. Another important suggestion is to start learning knife edge while speeding ‘cause in this manner you have to input a lot less rudder and you avoid correcting too much on planes non that balanced Btw that’s my point of view, I am open to any replies!
@MoralConflict
11 ай бұрын
No elevator in your knife edge spin?
@TwoBrosRC
11 ай бұрын
Look closer.
@loganclark2887
8 ай бұрын
I did this with my jet, I just had to spend a lot of time coding a gyro to help, still super hard Basically I used code to make my jet do this kzitem.infotYl6RNlZg74?feature=shared but stabilize its self with me inputting throttle and rotation, took months to make work good
@HabaianmaLaoan
7 ай бұрын
Thanks again Jon.
@old-rcplane-phart
2 жыл бұрын
I feel ya Jon on the CV19! It put me a day away from being in death's coffin.
Пікірлер: 135