Want to see more like this? Check out some of our tutorials & guides below: LEARN To LAND RC Jets: www.youtube.com/watch?v=G-8FX... Learn How to Land HEAVILY LOADED RC Planes: www.youtube.com/watch?v=rVByi... Learn How to Land the F-16 VIPER: www.youtube.com/watch?v=aLn_C... Order your own Viper 70mm v2: bit.ly/Viper70V2 Save 10% off once with this code: ReferralTwobrosRC Save $10 off with an order over $100 using this code: TwobrosRC
@Arm_Chair_Engineers
Жыл бұрын
What I wouldn’t give for a runway.
@Ibloop
Жыл бұрын
Helicopter
@ms888
16 күн бұрын
Thanks for sharing your experience in a beautiful video. As an ultralight pilot I have experienced many stalls on our P92: it usually stalls around 80km/h. In a turn around 20/25 degrees the stall occurred at 115km/h. The only way to avoid the stall in a turn is to have a lot of speed - a lot of engine - and make a coordinated turn with the rudder (to avoid adverse yaw.) I configure the landing of the Viper 80: reduction of speed in downwind, half flaps, landing gear down and on final with the throttle stick at 40%, then before touching the throttle stick at around 30%, obviously the elevator must be pulled back progressively. Greetings from Italy.
@rayhicks262
Ай бұрын
Thanks great learning video!!
@Dangerousrobb
11 ай бұрын
Ill say this, the whole dont land without throttle thing was made by people who never flew a Habu lol. That sucker floats so long that if im about 2 mistakes high i can cut my throttle entirely and glide in from about halfway through the pattern. Some planes like it more than others, but its more the pilot than the airframe. Thank you for making these videos i’ve learned quite a bit from them since i started flying again.
@carbonEYE007
Жыл бұрын
Love your channel, I am one of the guys that bought an edf as a first plane lol. I learned pretty quick, luckily the airframe has held up… now am ripping rolls and loops. Thanks for your hand launching advice
@TwoBrosRC
Жыл бұрын
Happy to help!
@Cosme422
9 ай бұрын
Why did I watch this video! Now I want to go fly my viper, and I can’t because of the weather! 😢 😂😂
@LiftVector
Жыл бұрын
I'm diggin' the music in this one. The feeling of a smooth sexy landing will always keep me trying to improve!
@TwoBrosRC
Жыл бұрын
We recently upgraded our sound library to an actual music library which gives us a massive amount of content to work with that fits the atmosphere better. The old stuff we used was cool, too, but this is a bit more tailored to our style. Thanks!
@acm1pt374
Жыл бұрын
I don't like landing on SAFE mode, but, it has saved me from bad stalls before. Except for that one time I didn't react to hit the switch and corkscrewed the Viper 70 into a lake 😅
@airhammer6203
Жыл бұрын
Great instructional video Jon. No one should ever stop trying learn, because there's always something you may not know. Haha, the trick would be to never forget it. AirHammer out!!
@LoveRC
Жыл бұрын
Love these series!!! Can't wait!
@MWall711
Жыл бұрын
My landing tips. Control direction the plane's with rudder, keep wings level with ailerons, proper pitch and airspeed with elevator and decent with throttle. It's a lot to manage at first but with practice it's doable ... most of the time. When I was first starting out I would make approaches and change only one of those variables at a time for a mock landing attempt and see how a plane would react.
@duonesmith
Жыл бұрын
😂 hey Jon, thanks for sharing my Bad landing.
@TwoBrosRC
Жыл бұрын
Hope it didn't come off as a dig on ya! We made sure to credit you and offer some helpful advice. :)
@duonesmith
Жыл бұрын
@@TwoBrosRC not at all. All fun in the name of r.c 🫡
@mikeyg1829
Жыл бұрын
Thank you for all of your tips, setups and tricks. Flying jets is a love/hate relationship for me. Just when I think I finally get the hang of landing them, I’ll either stall or bounce the viper 90/70. Very frustrating. I also have the F-16 80mm and I only flew it around 7 times because I’m terrified of it. Haha. I’m going to get an 8 channel receiver so I can do your setup and get the most out of it. Thanks again for all your videos. Cheers.
@TwoBrosRC
Жыл бұрын
Happy to help!
@ericevans6080
Жыл бұрын
All of my Viper 90 crashes have been caused by a bounce. The plane tends to bounce even if I landed smoothly, sometimes due the battery being too far forward, others from bumps in the runway. Are you saying a lower air speed helps with the bounce?
@TwoBrosRC
Жыл бұрын
Lower touchdown speed reduces the chances of bouncing. Bouncing usually happens because the aircraft is still flying while the wheels are rolling.
@adamrodgers2377
Жыл бұрын
I like these segments, even though I have been flying for years I always appreciate hearing from other RC Pilots about all aspects of RC Flying. I always pick up good tips from you, Model AV8R, and Tailheavy, hell I even enjoy watching Bryan Philips (spelling) long set-up videos. Thanks again 🤙🏼
@TwoBrosRC
Жыл бұрын
Happy to help, and honored to be listed among the greats!
@adamrodgers2377
Жыл бұрын
@@TwoBrosRC You are very welcome, all of y'all have helped my Daughter, Girlfriend and myself become better at flying and I appreciate each and everyone of y'all.
@GrantEscalera
4 ай бұрын
i watched an earlier video you did with using cro for landing. doesnt this make it exponentially easier to land? i noticed you did not mention anything about that in this video but it seems thats the primary way you were landing in this video.
@TwoBrosRC
4 ай бұрын
That only tends to work with larger jets or ones with bigger control surfaces than the Viper 70, unfortunately.
@OneHappyCrazyPerson
Жыл бұрын
You flying this with a gyro makes it fly like this not you. I use gyro's myself but you go the road of know it all while letting the electronic really fix it.
@TwoBrosRC
Жыл бұрын
kzitem.info/news/bejne/koSAvX2gbqyCgag
@wtfmimshag
Жыл бұрын
Lets kick things off in the comments. Landing flaps on downwind or nah 😅
@TwoBrosRC
Жыл бұрын
Landing flaps whenever. Upwind, downwind, crosswind, all wind.
@1212354a
Жыл бұрын
I have practiced and practiced landing jets on RealFlight. That said, all my 64mm jets bounce a little, but my 6S 70mm Yak-130 has shocks, so it just greases the runway.
@Robot_Child_Productions
Жыл бұрын
Skill issue
@FlightLogProductions
Жыл бұрын
What flap settings do you use for the FMS Viper?
@TwoBrosRC
Жыл бұрын
Just minimal settings, as little as possible to be frank. The more flap used on that jet, the more it bounces on landing.
@feelgooddany
Жыл бұрын
Good video!
@garygasser6760
Жыл бұрын
Good video!
@nirlachman007
Жыл бұрын
Thanks for another great and informative tutorial 🙏🏻
@tughillrc6327
Жыл бұрын
Good advice but as all advice application is the evidence of learning what is taught. No matter how good the pilot is we are all subject to wind/ turbulence. Look forward to your next landing lesson on heavy jets.
@TwoBrosRC
Жыл бұрын
Hence the short guide on wind and turbulence toward the end. :)
@Scooge420
Жыл бұрын
Amazing video. Precise, detailed, educational, and full of personal experience that only comes from someone who has done this a lot and has learned from their own mistakes. Thank you!
@TwoBrosRC
Жыл бұрын
Happy to help!
@jeffsuriano629
Жыл бұрын
This is the Best instructional video on how not to turn an EDF foamy into a pile of trash I've ever watched- big fan of twobros but this takes the cake - been rc flying for 30 years and still have a lot to learn.TY!
@TwoBrosRC
Жыл бұрын
Happy to help, Jeff! We're trying to improve our video quality by focusing on shorter vids with voiceover instead of the "talk into a camera, live" approach that used to dominate the RC videos on YT.
@redfishtom
Жыл бұрын
Every plane, every landing is different as every condition is ever changing. Hit all your marks in pattern and you are good. I would t recommend power off landings, it really doesn’t transfer to turbine A/C. Heavier, etc. how many times does a scale plane or airliner do a power off approach.
@TwoBrosRC
Жыл бұрын
Turbines are another story entirely - we're definitely not covering those here.
@dlm5536
Жыл бұрын
Hey thank your for this . I also wanted to thank you for your advice on on the Gain settings for an eflite rare bear . It actually worked better (less oscillation ) than than the default setup . Much appreciated for sharing these settings . 😃👍
@TwoBrosRC
Жыл бұрын
Glad it helped!
@motionsic
Жыл бұрын
Great landing lesson. Thanks!
@TwoBrosRC
Жыл бұрын
Glad you liked it!
@jacktar4421
Жыл бұрын
Thanks, great tutorial!
@robieosborne7369
Жыл бұрын
5:50 absolutely LOVE that quote 😎
@Djray54
Жыл бұрын
Very well explained. I’ve heard some of these things mentioned but never well explained on how to implement them.
@TwoBrosRC
Жыл бұрын
Glad it was helpful!
@jimmeyer3374
Жыл бұрын
What a great video does this technique good for tail draggers war bird type planes?
@TwoBrosRC
Жыл бұрын
Taildraggers require a more specialized landing and takeoff approach which we've covered before: kzitem.info/news/bejne/qGivyoOwkpWcYHY
@Jellybean17771
Жыл бұрын
outstanding
@Lonsome1223
Жыл бұрын
Land in SAFE mode should help.
@TwoBrosRC
Жыл бұрын
Not really. It will exacerbate any stalls due to automatically holding elevator input.
@Lonsome1223
Жыл бұрын
@TwoBrosRC During landing you often get sudden gusts of wind that can catch you out sending a wing into the ground. Safe has faster reactions than you have and could save a crash
@TwoBrosRC
Жыл бұрын
It'll crash if you're not keeping your airspeed up in SAFE, too. Fly it that way if you'd prefer, but it opens up significant potential of stalling that we'd rather avoid.
@Lonsome1223
Жыл бұрын
@@TwoBrosRC The thing that worries me more is that sudden gust of wind at the last minute before touch down that can catch you out. The wing goes up then hits the ground.
@enriquekramer4590
Жыл бұрын
Great video. Would love your comment on using negative ailerons in butterfly configuration for landing.
@TwoBrosRC
Жыл бұрын
This video covers crow (butterfly) landings and normal flap landings: kzitem.info/news/bejne/qGNurIykraOna2k We personally recommend the crow setup for turbulent landings, but not all aircraft make it easy to set up, nor do all modelers have the budget for a radio/receiver combination to do it.
@enriquekramer4590
Жыл бұрын
@@TwoBrosRC Great! Thank you. Made me realize I had watched that video already when you posted it, but it was wonderful to go and watch it again.
@brendanshroyer7696
Жыл бұрын
Something I've noticed at my field is that a lot of people are scared to get too low and end up diving into their landings. While technically this can work (and I have landed planes from a vertical dive) it tends to leave them struggling to bleed off the extra speed and prevent their plane from ballooning back up into the air. My preferred approach is to get as low as I can with the goal of crossing the front edge of the runway a foot or less above the ground so I can cut the throttle and let the plane drop back onto its mains in about ten to twenty feet. I practiced this approach with an overweight Freewing F-8 more times than I can count and it's really helped my landings. Optimal speed for this depends a lot on the plane's stall speed unless you can harrier the plane for long distances.
@TwoBrosRC
Жыл бұрын
It all depends on the jet and how you want to approach with it. Dive approaches can work if you've set the plane up for maximum drag. Your approach works if you're looking for precision and scale appearance while landing.
@1212354a
Жыл бұрын
I like to get my F-8 low and just kill the throttle. It glides right onto the mains.
@brendanshroyer7696
Жыл бұрын
@@1212354a Do you have the stock 3S fan in yours still? I've found that my 3S F-8 is very floaty, but the 4S upgrade makes it fly like a rock. I always needed a substantial amount of power in order to land my 4S F-8 smoothly.
@brendanshroyer7696
Жыл бұрын
@@TwoBrosRC I think the biggest benefit for me of landing low and long has been the amount of power I can carry through the turn to final. I can keep plenty of airspeed through the turn by keeping the fan at 25-50% power and by the time I reach the runway my flaps have bled off enough energy that the plane just settles onto the ground as soon as I turn the fan off. I really make use of the entire length of my airfield though because the extra energy takes a while to bleed off fully.
@madatthesky7588
Жыл бұрын
Bah, 77 minutes wait time!? I wanna watch nowwww 😅
@TwoBrosRC
Жыл бұрын
More like 12 hours! Sorry about the mixup.
@madatthesky7588
Жыл бұрын
@@TwoBrosRC no problem, thanks for the awesome content!
Пікірлер: 76