What Type of Vehicle Should I Build with the New MK2 i6 LPE? Drift car, Baja off road Truck, Rally car...? Comment your Ideas Below!
@DJSI3434
2 жыл бұрын
Drift Supra or BMW?
@mrtnaub
2 жыл бұрын
probably a "Race truck " ?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
@@mrtnaub Baja truck would be cool
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
@@DJSI3434 Good idea
@mrtnaub
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop yes, it will be easier ( rear live axle, suspension) but you will build a 2wd or 4wd baja truck ?
@redshoebox
2 жыл бұрын
Good work, love the engine. I see that the small cylinders have metal shafts on them, is this a custom modification? And does it improve the engine performance?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thanks, yes they have metal shafts for improved performance. The engine runs smoother under load at high rpm. They are available on my store, manufactured with metal shafts then custom modified for improved air flow. Very high quality and can handle up to 150psi - www.greengeckoworkshop.com/p/aina3u/
@zecharjatheunisse6602
2 жыл бұрын
Nice work! Could you see yourself making a W16 in the future? That would be epic!
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thanks. Yes I will do
@letsgoplay5731
4 ай бұрын
Best engine sound from all the engine videos I've watched so far.
@memeAlexcheramie
Жыл бұрын
1:28 that purr
@TribitFanOpex
2 жыл бұрын
@1:51 sounds like it's worthy of being a Lego P51 mustang engine!
@AiOinc1
2 жыл бұрын
Awesome to see a new engine, would you ever consider making a vacuum engine as well?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thanks, I could make one in the future
@demirkeskin2264
Жыл бұрын
This engine Feels REAL!
@chrisskyr623
2 жыл бұрын
This is great job
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thanks!
@kaylebrigger125
2 жыл бұрын
Sick as always!
@anderesgooglekonto6869
2 жыл бұрын
Yaaaay another video :)))))) Still tuned for the ripsaw ;) xD
@Tylerharrell64
Жыл бұрын
These engine are more suitable for a boat, they mainly have massive long stroke engines. You should build a cargo ship with three or four 2liters hidden inside. Might have decent runtime and would be pretty sick.
@theannihilator665
2 жыл бұрын
I wanna see an engine with the new longer pistons and longer crankshaft throws, would be a lot more displacement potentially a lot more power
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Great idea for a future engine
@Dudeface167
7 ай бұрын
Sounds sweet and its so smooth! Makes me want to build an i6 LVE.
@Aston3003
Жыл бұрын
Just like a irl i6, it's very balance. You gatta love that almost 0 vibrations
@nyxiph
2 жыл бұрын
Could you try to build a W16 style engine as a pneumatic engine? you are very good in building these and I am sure you can do it!
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes that is on the list to make
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Buy the Engine Here, In Stock Ready to Ship (15% OFF) - greengeckoworkshop.com/p/complete-kit-mk2-6-cylinder-lego-pneumatic-engine-inline-6/ New Engines Coming Soon (New i3 Switchless, Small 1 Cylinder and V12...) Stay Tuned
@bobski1151
2 жыл бұрын
Awesome work on your builds and your amazing shop.
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thank you very much!
@TM450FI
Жыл бұрын
I work with pneumatic machines and we have oil tanks between the compressor and the pistons to oil them. If puts a Little of vaporized oil inside and keeps It all lubricated, maybe It would make It run even smoother and higher
@LeleganceCoral
9 ай бұрын
Bought one of these (i love it, great purchase) and was wondering if a turbo is possible to add on, not a working one but one that makes sound off any exaust the i6 has.
@GreenGeckoLegoTechnicWorkshop
8 ай бұрын
Thank you, you can only add a spinning turbo to switchless engine designs. As there is no exhaust tube on a Switch Type Engine.
@SpacedHawk
2 жыл бұрын
So how long until the tatra runs out of air? Also would swapping out the DIY tank for the dust can give you any advantages on the tatra?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
About 1 min on 4.5L tank, yes it would be better with the air duster can.
@JaceN3D
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop wow small time for that big !
@FelixIsGood
Жыл бұрын
@@GreenGeckoLegoTechnicWorkshop You should think about trying to make a custom aluminium can which can be charged with a bike pump. Would definitely buy one of these.
@mariorodriguez2200
2 жыл бұрын
Can you do the smallest version of your pneumatic engine?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes, I have made a new small 1 cylinder lpe. It will be out soon
@mariorodriguez2200
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshopWoW thanks i cant wait to see it
@ravethefox
2 жыл бұрын
if possible i wanna see you increase the pressure on an engine until it blows up
@EagleAirOne
2 жыл бұрын
Have you ever thought of using a high capacity high pressure airsoft tank (i.e. 4500psi 90ci tank) with a series of regulators in order to supply the engine with enough air for long runtime?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes I have, the only problem is the air is very cold and can freeze the parts if you use a high pressure setup.
@nathangaming82075
Жыл бұрын
I rate the engine sound 1000000000000/10
@lifeatitsfinest3019
2 жыл бұрын
ik it doesn't work like a 4 stroke but you should offset the crank throw to the degrees that most common inline 6s are
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
It has offset of 60 degrees per cylinder, it runs smoothest in this setup.
@lifeatitsfinest3019
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop haha yeah i just thought it was a cool idea but yeah it not the same as a petrol four stroke so the imbalances won't be the same
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes, the cylinder has power up and down. Compared to Petrol Engines that only have power when the piston moves down.
@operatorcheescakman9153
Жыл бұрын
For a Lego engine I'd rate the sound 8/10 it is a pretty good sound
@feilistialininta6445
10 ай бұрын
I wanna see a turbo on it. That is great already I wish you can make a R34 GTR with a Rb26 engine (I6 turbo)
@blingblingdog6958
Жыл бұрын
Could you make a race car. Like an F1 or drag racer. You could use a small air tank that is integrated into the body of the car.
@mrtnaub
2 жыл бұрын
beautiful.
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thank you
@mrtnaub
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshopyour alternatives PF motors helped me, thank you so much ;)
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
You're welcome, glad you enjoy the motors
@fat_cat8457
2 жыл бұрын
Can’t wait for the v12 video :)
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Coming soon!
@BeightonJunction
2 жыл бұрын
This is really well made. Will it go on your store?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thank you, Yes it is already on my Store to buy - www.greengeckoworkshop.com/p/complete-kit-mk2-6-cylinder-lego-pneumatic-engine-inline-6/
@hyperion0669
2 жыл бұрын
these are so cool but would you be able to make a large lego dual engine ship and make it RC by any chance
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes It would be able to
@hyperion0669
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop yo that would be so cool id love to see the boat!
@ludicrousbrickstudio
2 жыл бұрын
When is your ripsaw project going to be finished?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
I will rebuild it for the MK3 V8 LPE, so it has more power
@Monke-ls6kb
Жыл бұрын
Hey you should try to make an LVE lego vacuum engine
@niiice8622
2 жыл бұрын
How long does the 6x6 truck run with the diy air supply?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
About 1 min on 4.5L air tank
@WrenchNotFound
Жыл бұрын
I have a doubt, I want to buy your 5 speed gearbox, Does it come with instructions?
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
Yes it comes with Instructions, let me know if you have any other questions.
@WrenchNotFound
Жыл бұрын
@@GreenGeckoLegoTechnicWorkshop I really want to buy the RC car pack which contains the Buggy motor along with the servo motor and remote control. Along with this I want the 5 speed + reverse gearbox. I want this order to come to my address in India, You do ship there right?, Plus do you have a video on the 5 speed gearbox like you do on your engines and finally, I want the 6 speed one more than the 5 speed one but Im wondering if that has reverse can you just answer this? Sorry to ask alot :)
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
Hi, Yes I ship to India. I will be making a video for the 5 speed + R Gearbox soon. The 6 Speed does not have reverse. The 5 Speed + R has Reverse gear. Let me know if you have any other questions, the RC Pack and the Gearbox is a great combo.
@WrenchNotFound
Жыл бұрын
@@GreenGeckoLegoTechnicWorkshop Thank you so much for replying to my questions! Expect the purchase from me in about 3 months I guess..
@implayingrobloxandwht
2 жыл бұрын
Hey men, how do you get the psi automatically instead of getting air in a bottle?
@spudstudios3342
2 жыл бұрын
Air compressor hose directly to the engine
@implayingrobloxandwht
Жыл бұрын
Ok
@caraddixt1195
2 жыл бұрын
That thing would be insane at 200psi or whatever that gauge went up to
@Ryba252
Жыл бұрын
sound 10-10
@crazydilo2558
2 жыл бұрын
I love it, now add a turbo
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Good idea
@anthonylehman4084
2 жыл бұрын
nice bro
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thanks
@slabgizor1176
Жыл бұрын
Are these RPM figures with the moving parts lubed or no?
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
I don't use any silicone on the moving parts "like axles", only on the seals inside the cylinders.
@truereaper4572
Жыл бұрын
@@GreenGeckoLegoTechnicWorkshop Do you think lubricating the axles would provide any appreciable performance increase?
@ERIKNOWAKK
2 жыл бұрын
Try to make Tatra with this engine
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Awesome!
@JaceN3D
2 жыл бұрын
The air duster can idea is god plan, and you can probably recharge it
@kavyanpurohit6151
2 жыл бұрын
yeah but the gas inside the air duster is liquid so it can store a lot, but if you pump air into it will not hold too much because air cannot be liquified like that
@JaceN3D
Жыл бұрын
@@kavyanpurohit6151 if you turn it ipside down let the freezer air/ liquid go out u will have empty can 😃
@chrisimnotreallyhere3491
Жыл бұрын
how on earth did you manage that much psi? everytime i try 40 psi on my engine that i made the hoses pop out
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
For running high pressure above 80psi, I recommend using Zip ties at the main connection points for the tubing.
@sotiriospapastergiopoulos8582
2 жыл бұрын
As a BMW fan that's 💯💯💯🔥🔥🔥
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thank you!
@zockex6424
2 жыл бұрын
nice
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thanks
@joshjlmgproductions3313
2 жыл бұрын
Have you made a V8 LPE model?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes, here is the video kzitem.info/news/bejne/1Ixq06uVrKGViqw
@BenVo-lr8lx
Жыл бұрын
hey could you in the future make a engine that could do 5000 rpm?
@FiestyPatriot
10 ай бұрын
That sounds like my dad‘s four wheeler
@JaceN3D
2 жыл бұрын
What is the difference between the first version?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
The New MK2 i6 LPE has new Style Switches, New Metal Shaft Cylinders and More RPM and Power. 2000 RPM vs 1500 RPM. It also runs smoother.
@mser5765
Жыл бұрын
Please can you show how make this engine:)
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
You can build the engine using the instructions I created: www.greengeckoworkshop.com/products/pro-instructions-mk2-6-cylinder-lego-pneumatic-engine-inline-6-2000rpm
@ssil3nce476
2 жыл бұрын
Hey man, the pneumatic thing, what does 1x5 mean?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
1x5 means the size of the cylinder
@ssil3nce476
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop oh okay, btw im doing an i4 with your i6 instruccions but im building it with the biggest pneumatic yellow thing, do you think the pieces will go along?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
You will need to use the Small 1x5 Cylinders, you can buy them here ready for LPEs: www.greengeckoworkshop.com/p/aina3u/
@firealarmguy270
2 жыл бұрын
I wonder if you would be able to run steam in these engines I would love to see a steam engine comeback
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Steam is too hot for Lego Pneumatic's, so the engine must be run on air
@rotatingcat1957
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop Yeah the pneumatic would melt
@rotatingcat1957
2 жыл бұрын
Also I made your 1 cylinder switchless with the video and it worked let's say 2000 rpm (i dont have a tachometer)
@arnoldrimmer9161
Жыл бұрын
Great vid, does WD40 work just as well as silicon spray?
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
WD40 doesn't work well, you need to use silicone.
@bambas_
11 ай бұрын
2jz?
@drt5665
2 жыл бұрын
id still pay 20+ bucks for instructions on that tatra
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Its a lot of time to make instructions, it has been taken apart now
@Stanislav7180
2 жыл бұрын
I see you for 1st time hello i am from bulgaria and like lego !!! I will give you like and subs !!!! Make coool stufs pls !!!
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thank you! Yes I will
@lynx8779
Жыл бұрын
Radial?
@RoboticSky-s5k
Жыл бұрын
Please make a v12 engine
@JaceN3D
2 жыл бұрын
Can you refill the can
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
If you use an air compressor
@JaceN3D
2 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop it works thanks
@gelasera7862
2 жыл бұрын
10/10 it sounds like a v8
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Thank you!
@Unjihighschool
2 жыл бұрын
Can I get this product in Korea?
@Unjihighschool
2 жыл бұрын
+ Does the MK3 V8 complete kit include instructions?
@Unjihighschool
2 жыл бұрын
++ Do I have to write my home address in Korean?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes I ship to Korea, I have delivered to your Country before
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Yes the MK3 V8 LPE Complete Kit Comes with Instructions and all Brand New Lego Parts and Pneumatic's needed to build the Engine. The Address form will require your address, you can write in Korean and It will work. If you have any questions or need help, send me an email at greengeckoltc@gmail.com
@Unjihighschool
2 жыл бұрын
👍
@LAVODKA12
Жыл бұрын
Sounds like a 5.9 cummins
@akm5550
2 жыл бұрын
Pleaseee atleast one time make a small cylinder engine non modifief
@corn8966
2 жыл бұрын
MAke a rb26
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
Good idea!
@lordridler914
Жыл бұрын
Still there? :)
@GreenGeckoLegoTechnicWorkshop
Жыл бұрын
Yes the Engine is still available on my Store here: greengeckoworkshop.com/collections/lpe-engine-kits
Пікірлер: 153