New Sub,,Thunder laser comment sent me over here. Thank you for sharing
@ThatMomWithALaser
3 жыл бұрын
🤯 Blown away. This is amazing, Chris!
@ThatMomWithALaser
3 жыл бұрын
One day I’ll figure out how to engrave photos. 🥴
@toddltomlinson
3 жыл бұрын
Awesome idea Chris! Love it
@krowkuf
3 жыл бұрын
Thanks for posting these videos, they are some of the more informative ones out there.
@paqratst1
3 жыл бұрын
Great idea 💡 they are coming out great I'll have to play with some acrylic later
@SpruceSculptures
3 жыл бұрын
I just 'spearimented with this and what a wonderful process. Need to dial this in for my 50w machine, but ballpark first run was very, very impressive result. Of all the laser related how to videos, this one is the most phenominal as far as results are concerned.
@Ovationdj
Жыл бұрын
❤❤❤woooowwwe
@jelled524
3 жыл бұрын
Amazing idea!! Thx for sharing! Just started with my laser machine but definitely going to try it!
@michelleburrows121
2 жыл бұрын
I forgot we used to do this on one of our flatbeds years ago. I will definitely be trying this with our open concept laser! Thanks!
@philscraftcorner
3 жыл бұрын
Awesome work I will definitely have to give this a go. Maybe even more layers like a mandala
@fxrupr
3 жыл бұрын
Very nice work! Thank You for sharing this..
@muppetarms8406
3 жыл бұрын
I only have a Diode laser but just the prosses is worth trying on other materials
@mariatheodorakakis3708
3 жыл бұрын
thank you, brilliant idea
@flyinghighoveryou4872
2 жыл бұрын
Love it man great job taking this to next level. Will this work on diode Ortur? It’s the only laser I have right now that takes lightburn my c02 Beamo only works with its software. I’m upgrading q1 in 2022. Thanks for sharing.
@davedoran7831
Жыл бұрын
I read the comments so I hope I didn’t miss if the question was already asked. It looks like your image is burned directly to the top of your acrylic? I tried this with my diode laser and my laser passed through and burned my board on the back side of my work. Do I have the wrong laser or am I using the wrong material?
@mudshark1971
2 жыл бұрын
So I found this googling how to do photo engraves on nova 51 100w. Do you have a tutorial for wood engraves. I had a Glowforge and now am trying to figure out process for Thunder using lightburn, and close settings and such.
@Vondarius
2 жыл бұрын
Would you use the same settings for glass vs acrylic? Also, your speed settings seems very low, how long does the engrave take for each step?
@ClintonCaraway-CNC
2 жыл бұрын
@House of Lasers Do you recommend the American Photonics products with the Thunder Laser? It seems to be a much better value for the specialty lenses than the two sold by Thunder Laser.
@HouseOfLasers
2 жыл бұрын
100% APC lenses are the best quality you can find. When I visited we took a lens I had and put it under an electronic scope to do a comparison of imperfections.. the difference was night and day.
@Cncco
3 жыл бұрын
I have a xcarve with the opt laser 6w attachment I'm currently trying my luck with the historical photo lunch on a skyscraper with my height at 35mm my speed sitting at 300 my max power is at .85 I turned on the negative image over scanners at 2.5%, my line interval is that .00348 with my DPI setting set at 287 I'm using the image mode of dinner with my number of passes at one with the negative imaging on I'm picking up some detail but not the amount that it should what should I do?
@IAmYakYakTV
3 жыл бұрын
HELPFUL!!!
@acruzism
3 жыл бұрын
thank you for sharing
@hectorflores6666
2 жыл бұрын
Hi Chris. Would you please show me the link to the video where you show how to correctly set up the laser to come back and go over the same image?
@HouseOfLasers
2 жыл бұрын
Its in this video... Nothing special just flip to negative after filling with paint. As far as your halftone question, the point is Lightburn can do it just as easy and external processes are just a waste of time. You do need a program to delete backgrounds though.
@SUNRISE-ADVENTURES
2 жыл бұрын
Would this work with a LED bottom lit piece?
@SpruceSculptures
3 жыл бұрын
Is no air deliberate? If so why?
@josevilla2626
2 жыл бұрын
Whats the name of software?
@ossoss7118
3 жыл бұрын
what the name of your software used for engrave please
@ossoss7118
3 жыл бұрын
im used auto laser 2.6.3 but is didnt have tools grayscale for image
Пікірлер: 34