All my videos about this Uni Fan, click Read More to view the videos The Uni Fan Unit ============= Lian Li UNI Fans SL120 - Introduction (Part I) - kzitem.info/news/bejne/sIiatZaAjaBeZno Lian Li UNI Fans SL120 - Dos and Dont's (Part II) - kzitem.info/news/bejne/sod-sImHr32on44 Lian Li Uni Fan SL120 - Connection & The Controller (Part III) - kzitem.info/news/bejne/s6Noy6Gbsn-GdKA Possible Break Fix of Uni Controller on Windows 10 - kzitem.info/news/bejne/maJqz2mLo4FkmKg Push Pull Fan Configuration - kzitem.info/news/bejne/tX-Fnn6uj4yFnG0 Uni Controller with Lian Li Products ============================= Lian-Li Galahad 240 - kzitem.info/news/bejne/uYR5p5l3kWKejYY Lian Li Strimer Plus - kzitem.info/news/bejne/umakz5Oqn5WJZpw Galahad + Strimer Plus + Uni Fans & Controller ====================================== Mega Combo - kzitem.info/news/bejne/z6Ci0ZiDcp6KlX4 Other Products on Uni Controller ========================== EK Vardar Evo 120ER Fans - kzitem.info/news/bejne/w4OI4GaBj6OTnXY
@idubbzz7790
3 жыл бұрын
can you put a link to the wite converter cable u used to connect the strimmer controller to the uni fan controller it's not in ur description
@KleoYan
3 жыл бұрын
@@idubbzz7790 it is in my description www.aliexpress.com/item/1005001598378033.html make sure to select 1 TO 1 Female 5V 3pin
@tzyang99
3 жыл бұрын
@@KleoYan Bro but the white cable shows male 3pin to male rgb, the link you provided is female 3pin to male. So I just have to buy the 4pin thing pull out 1pin and connect both female 3pin, it will works?
@KleoYan
3 жыл бұрын
@@tzyang99 hello and welcome to my channel. yes it will work. Paste this for you. read below :) If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
@tzyang99
3 жыл бұрын
@@KleoYan thanks! Will try it soon!
@noxmu4715
3 жыл бұрын
This is exactly what I needed. Kleo, I have been following your uni fan tutorials. All those videos are extremely comprehensive, none of the reviewers explain like the way you do. Thank you so much. Keep up the good work. But I still hate you, you made me go broke. 😩
@KleoYan
3 жыл бұрын
Gee thanks Nox Mu and sorry, my intention is to aid those getting confuse about how this unit works. but I guess you should be happy with those flashy lightings in your PC haahhaha. still thank you for all your support.
@noxmu4715
3 жыл бұрын
@@KleoYan is not only me, my hubby too! This is the reason why I am broke. I am only kidding and yes we will be having fun with the effects. Now I will have to wait for Mr. Technician to fix the strimer plus for me 😂
@KleoYan
3 жыл бұрын
@@noxmu4715 lol so naughty, I assume Mr. Technician is your hubby lol. Well am glad you have enjoyed your stay on my channel. Cheers!
@zarihanraduan
3 жыл бұрын
If iam using thermaltake aio cooler can sync like ur tutorial also sir? And.wht item should i buy ...i tgk kurang paham.sbb i buy my fan also used.🥲🥲
@KleoYan
3 жыл бұрын
Hi iSappSikettt, welcome to my channel, if your AIO have a standard argb pin connector, you can buy the convertor either from lian li (argb cable kit) or just this convertor www.ebay.com/itm/133521646617?hash=item1f1682a419%3Ag%3AnnUAAOSwB%7EBfYx4O (Select 1 to 1 male.)
@melvinfuentes9815
3 жыл бұрын
14:40 Hello! Nice video. I’m thinking to buy a Lian Li PCO Mini and get 9 SL120 fans (3 in the top, 3 in the bottom, 2 in a 240mm AIO and 1 in the back). And I also want to buy a set of lian li Strimer cables. My question is: Can I connect the 9 fans to one uni controller and then connect the strimer cables to the strimer controller and then the controller to a second uni controller? That way I would have 2 uni controllers in my rig and I could control each of the controllers by they L software, right? I hope this make sense haha
@KleoYan
3 жыл бұрын
Hello Melvin, if you wanted two controller for this. you can.. you will need to get two uni controller and the way to do it is to check your uni controller and depending on which set of SL you have gotten. here are some videos which will allow you to use two controllor. before you proceed, I would advise you to make sure you can use the controller before you buy more. test them out before you get back fired as some users having issue not able to even use 1 controller. kzitem.info/news/bejne/kqRn06NsjXaoqY4 (demo on using more than one controller using L-Connect 2) kzitem.info/news/bejne/yZCm4IaVbWtiapg (you will need to know if your controllers have the correct firmware version) these are the converters you might need Converter needed =============== ‣ Lian Li aRGB Cable Kit - lian-li.com/product/argb_cable_kit/ - Lian Li aRGB Cable Kit An illustration of Lian Li aRGB Cable Kit - imgur.com/gallery/beYR8CN If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
@houstonslade4228
3 жыл бұрын
so I plugged everything in but the block for my Galahad is just staying white not changing colors with the fans???
@KleoYan
3 жыл бұрын
Hello Houston Slade, welcome to my channel. You might want to recheck your connection of the AIO pump or to test it alone with the AIO argb controller first. just to make sure that it does change color.. need to do some troubleshooting.
@hoahocvui97
2 жыл бұрын
Hi Kleo. Thanks for the video. i bought the argb kit from lian li and at 1:44, you connected 2 fans using that cable. If i have 3 fans in my aio, which cable i should use to connect all of them?
@KleoYan
2 жыл бұрын
Hi Hóa Học Vui, welcome to my channel. if you are using SL on your radiator. use this diagram imgur.com/gallery/beYR8CN if you are using the original ST120, use this diagram imgur.com/gallery/ErMZdQh
@RetroFett80
3 жыл бұрын
How did you make those adapters for the strimers and gahlahad I have been looking everywhere for them and no one sells any?
@KleoYan
3 жыл бұрын
Hi Mike Daigle, welcome to my channel. you can find these converters here www.aliexpress.com/item/1005001598378033.html , just make sure to select 1 To 1 , Female 5V 3pin (look at the picture to confirm) or if you can do it yourself here kzitem.info/news/bejne/rbBvlp1rsp9ld6w
@funkmastafog
3 жыл бұрын
This was so helpful. But getting the adapter cables is such a pain in the ass.
@KleoYan
3 жыл бұрын
Hi funkmastafog, welcome to my channel, yup, getting those adapters are indeed troublesome. best solution is still to obtain the lian li argb cable kit. if really not choice then, you might want to get parts and start to crimp yourself. kzitem.info/news/bejne/rbBvlp1rsp9ld6w the parts you can get it as I have mentioned in my description or refer below message :) If you are not purchasing the Lian Li aRGB Cable Kit, get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
@FlamefireFlash
7 ай бұрын
Hi i have the lian li evo rgb case with the case rgb strip, how can i connect 7 SL INF fans, galahad 360 SL INF AIO, 24 pin strimer v2 cable and the 3x8 strimer v2 cable. I have the uni fan controller and strimer controller? theres also only 2 usb header on motherboard and the galahad cooler with controller takes up 2 usb ports, so i wont have enough for the strimer controller. Is it possible to connect STRIMER V2 controller with fan controller And do i definitely need argb cable kit?
@KleoYan
7 ай бұрын
Hi Jamil Rahman, I assume your Galahad is of the GA II Trinity SL-INF. If you want all to sync up using L-Connect 3 app, you will need to get additional item 1) Lian-Li USB 2.0 1-to-3 HUB 2) Lian Li ARGB Kit Method to plug 1) Plug the Lian-Li USB 2.0 1-to-3 Hub to the motherboard USB Header (either Port 1 or 2) 1) Connect the Sata cable to the connector of your SL Inf Controller sata connector, Connect the USB cable from SL Inf Controller to the Lian-Li USB 2.0 1-to-3 Hub 2) Plug you SL Inf fans (ARGB & PWM) to the controller (occupied only 3 ports, example Port 1 to 3) 3) Connect USB Cable from the Galahad AIO pump to the Lian-Li USB 2.0 1-to-3 Hub 4) Connect USB Cable from the Strimer plus V2 controller to the Lian-Li USB 2.0 1-to-3 Hub 5) Connect your strimer plus v2 strips to the Strimer plus V2 controller 6) Plug the case sata to your PSU sata cable 7) Plug the case argb 3pin to convert it with the Lian Li argb kit which labled Y-Type 3P Signal Cable of the official website lian-li.com/product/argb_cable_kit/, then the other end to your SL-Inf controller port make sure to set your case to bypass the case button and to sync to motherboard, which in this case is pointing to your SL-Inf Controller. Then you can make use of L-Connect 3 app to control all the argb effects.
@tonylou8424
11 ай бұрын
hello can you help me out please i have the Hyte Y60 case i am having problems fitting my Lian-Li uni fans AL120 v2 ARGB To My ASUS rog Ryujin 360 RBG all-in -one liquid CPU Cooler 360 because the screws are not long enough to go through the FAN and then the bracket to the radiator they are to short.... so can you give me the name and the side of the ones you are using plz in your video also do you no where i can get these screw # 6-32 x 3/8 in from to plz i am in the UK
@KleoYan
10 ай бұрын
Hi Tony Lou, do pardon me for the late reply. in this content I am using the non v2 fans. the v2 are at thickness of 28mm and the radiator screws should measure 30mm in height. Though the V2 are at 28mm in height but you should be able to use the 30mm length rad screws of your Ryujin liquid AIO. maybe do some measurements if it's of non 30mm. you might need to get 30mm radiator screws www.amazon.co.uk/iplusmile-Stainless-Computer-Cooling-Radiator/dp/B09ZPRMGL2/ref=sr_1_20?crid=3A68N3E2SR7MC&keywords=radiator+screws+pc&qid=1699434025&sprefix=radiator+screws%2Caps%2C220&sr=8-20
@satriarief
2 жыл бұрын
Hi Kleo, I have couple of questions here: I have the Galahad SL series AIO, Strimers, LED diffuser, and AL fans. 1. Can I connect the AIO and the SL separately? for example AIO on the port #1 and the SL (daisy chain) on the port #2 into my UniFan SL Controller? 2. Can I connect the Strimers and LED diffusers (Lian Li Lancool), each on the port #3 and #4 into my UniFan SL Controller? 3. If I connect the rest of my AL fans to a separate UniFan AL Controller, what accessories should I have to make it all works? does it only need the USB gen2 port on the MoBo? (separate from the UniFan SL Controller) thank you
@KleoYan
2 жыл бұрын
Hi Eduardus Pribadi, welcome to my channel. Q1. Can I connect the AIO and the SL separately? for example AIO on the port #1 and the SL (daisy chain) on the port #2 into my UniFan SL Controller? A1. yes you can not an issue. Q2. Can I connect the Strimers and LED diffusers (Lian Li Lancool), each on the port #3 and #4 into my UniFan SL Controller? A2. you can do that too but your LED diffusers will need a convertor to convert from standard argb connector the the JST03 connect, as your uni controller only accept those type of connectors. Q3. If I connect the rest of my AL fans to a separate UniFan AL Controller, what accessories should I have to make it all works? does it only need the USB gen2 port on the MoBo? (separate from the UniFan SL Controller) A3. Besides additional uni controller, you will need to have an additional USB socket on your motherboard and you will need to run the L-Connect 2 application. hope all these answered your question. thank you!
@ProfXc
3 жыл бұрын
OMG thank you so much for this I had like 3 Y connectors coming out of 1 ARGB header and it wasn't sitting right with me so I did some searching and found this. Going to pick up a ARGB kit ASAP. Thank you so much. I had some questions I think would be awesome if you could dive into: 1) is it possible to set the AIO fans to sync as needed to the CPU Temps? Since its going to be connected to the controller instead of the CPU fan header I'm wondering if there's a tradeoff here in how it reacts to the CPU settings. I first had the AIO fans daisy chained to the CPU fan header and notice they would rev up periodically. Now that I'm going to take it off the motherboard and connect them to the hub I'm wondering if ill loose any sync function here. 2)Could you run though how to check and ensure that the CPU pump is running at full speed. I'm sure it varies by motherboard but I'm also sure any info shared can help everyone figure out their own settings as needed. 3) Is there any way to pair or unpair the strimmer from the controller without opening up the pc and holding the button? or is it you pick which you want and settle with it. Thanks again for all your help!
@KleoYan
3 жыл бұрын
Hi Chris Xavier, welcome to my channel, I did notice your questions when you posted them 7 hours ago but I am at work. unable to answer you in detials. now if you are getting the argb cable kit, this is just a diagram guide imgur.com/gallery/beYR8CN. now to answer your questions A1) you are able to but you will need to load the L-connect with the settings loaded. I would still advise you to leave the lighting effects on the uni controller and the fan load directly to the CPU FAN and your AIO Pumb to CPU_Fan1/pump. set the PWM in bios to controller CPU FAN base on temperature. as for the CPU_FAN1/pump. set to pump and I will run at full speed. 2) let me see what I can do with a seperate video. 3) there are no other ways to do that, unless you do some mods to do some soldering on the strimer controller's pcb and to extend the switch outside the case. I am terrible sorry that the strimers I have presented in this channel, that does not belongs to me, I have returned to the owner and I myself do not own one. If not I might be able to show you how to do the soldering points
@ProfXc
3 жыл бұрын
@@KleoYan thanks kleo So if I'm understanding correctly it won't work to just set the radiator fans only to pwm in the L-connect software?
@KleoYan
3 жыл бұрын
@@ProfXc hi, it will work is just that when your pc starts up before window load. The fans might just ram up all the way full, till your windows os is fully loaded and also to load the L-Connect application. Then the L-Connect will trigger the pwm profile to the output where you plug your fans in the uni controller. I hope am not confusing you.
@KleoYan
3 жыл бұрын
@@ProfXc know what, this will give you a clearer picture kzitem.info/news/bejne/s6Noy6Gbsn-GdKA btw I have a series of videos about these fans you might want to check out. Especially the dos and donts. Very important, do check out my description as all the uni controller videos might be useful for you. Or even this playlist kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm
@BooYaa253
3 жыл бұрын
Hi. Can you tell me what is the HUB or controller called that is connected to strimmer please? Seems to look different and I can not find it anywhere on the internet. I will be starting to build a PC with 10 unifans, strimmer, 8 pin Lian li rgb, Galahad 360 with unifans and I am a bit worried that it will not sync all together.
@BooYaa253
3 жыл бұрын
Ok I see now. It is a strimmer PLUS that does have this hub.
@KleoYan
3 жыл бұрын
Hi BooYaa253, welcome to my channel and pardon me for the late reply. Yup that's correct it's the strimer plus controller when you purchase the strimer plus 24 pin cable or the combo set.
@fedakope
2 жыл бұрын
Great video man ! But i have a problem, instead of the provided-fans for the Galahad 240, i have 2 SL120, and I can't make it works, i'm stuck at the beginning :( Any help would be appreciated
@KleoYan
2 жыл бұрын
Hi fedakope, welcome to my channel. I am not sure which issue you are having and I do get an email similar to your case. If you do have the lian li aRGB cable kit. you might want to take this diagram as a reference. imgur.com/gallery/beYR8CN
@Don-1307
3 жыл бұрын
You're a legend, by far the most in-depth videos. I would be lost without you.
@KleoYan
3 жыл бұрын
Hi Braeden, welcome to my channel and you are most welcome. Just trying to help those who needs help :) but once again thank you for your visit.
@HustlerKid
Жыл бұрын
I don’t kno ur gonna reply but here’s a shot I will be having a total of 9 uniinfinty fans and also 2 extra sl 140 uni fans + 24/8 pin strimmer cable will that work on 2 Controllers or would I need 3 if possible
@KleoYan
Жыл бұрын
Hello HustlerKid, welcome to my channel. As what I see, you need 1 controller do to the trick. I assume your Strimer Plus are not the V2. let me break it down for you For SL Infinity Fans 3 Top fans + 1 rear fans, using the merge link cables between these fans, then connect it to Port 1 of the SL Inf Uni hub 3 bottom fans connected to Port 2 of the SL Inf Uni Hub 3 fans (Which I have no idea where they are mounted) to Port 2 of the SL Inf Uni Hub For SL 140 2 fans plug only the ARGB to Sync 2 of the SL Inf Uni Hub (the effects will follow Port 2) and the fan pwm cables directly to your motherboard fan header (PWM is controll by your motherboard utility Strimer Plus all strips are to plug to the strimer plus controller, then the cable that goes to the motherboard ARGB header, plug it to Sync 4 of the SL Inf Uni Hub (ARGB effects will follow Port 4) hope that answer your question.
@GypsyBoysOutdoors
3 жыл бұрын
I just ordered (9) SL120 fans but they don't come with a controller. Do I need to purchase the UNI Fan Controller separately? If so where do I purchase it?
@KleoYan
3 жыл бұрын
Hi Company LLC, welcome to my channel. The controller will come together if you buy them as a set. I am not sure where you can only get the controller. You might want to write in to Lian li at their official website to ask for it.
@mahendranraja1105
3 жыл бұрын
hey dude im using 6 unifans and 3 fans which is nzxt, im using nzxt usb hub and lian li controller..this setup is done by my pc builder from a shop...im not sure how they did it..because i have not open the back case of my lian casing..plus its my 1st build and i dont know any about these,.....im using rog x570e mobo....so im not sure why my unifans are not synced with my mobo....do u have any idea...and everytime i start my pc i have to open those aura and lian li software to adjust the rgb and set it...i cant make it sync..pls help
@KleoYan
3 жыл бұрын
Hi Gaming Athlete, welcome to my channel. as for your question, I am afraid am not able to reply you as I do not use any NZXT hub. maybe you might want to check with the shop. thank you!
@joethomson8491
2 жыл бұрын
Hey I did it bud and all most burn my house down lol it was my fault I put my strimmers and 10 al120 fans on the hub plus the lights on the front off the case and I did not notice that when you Click all fans in the hub is 16 fans not 12 so I over loaded it but I was lucky that did not kill all my stuff and the fans so I no now what to do and not to do the think is I watched all your vids and I did it wrong lol but it works but I’m now nerves to do it again I did do again but I took it out but it’s ok thank you for the vids just wish I had watch them more than twice lol😜👍🏻😂😂😂😂
@KleoYan
2 жыл бұрын
Hello Joe Thomson, welcome to my channel, am so sorry to hear this mishaps. I sincerely hope you will watch this video from my playlist kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm, the dos and donts, SL and AL both have load limits on the uni controller. ok, it's better safe than sorry. do watch this kzitem.info/news/bejne/sod-sImHr32on44 and please becareful ok. all the best with your build, again am so sorry to hear the mishap you had.
@rckslngr
3 жыл бұрын
Thank you for the informative video. I have a question however, if I'm trying to connect the stock Galahead 360 AIO fans to the Uni controller will I still need to purchase the 3pin to female adapter? So far I have x6 SL120 UNI fans and the Galahead 360 AIO with its stock fans. I'm so confused as to how I should set this up and I don't want to run into problems when I install it. I hope to hear from you soon!
@KleoYan
3 жыл бұрын
Hello ReachDavidKim, welcome to my channel, if you are using the default ST120 fans which comes with your Galahad AIO, as I have illustrated in this video at 0:50 , plug to the cables provided in your Galahad and you will need the 3pin to female adapter. is either you purchase the lian li argb kit or alternatively to purchase the cable which I have shown you (in white). below is what you need. Converter needed =============== ‣ Lian Li aRGB Cable Kit - lian-li.com/product/argb_cable_kit/ - Lian Li aRGB Cable Kit An illustration of using the Lian Li aRGB Cable Kit - imgur.com/gallery/beYR8CN If you are not able to purchase the Lian Li aRGB Cable Kit, get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
@AustinBoil
3 жыл бұрын
Ok I'm guessing the 4 wire splitter plug goes into one of the controller ports and the two other ends of the splits only have three wires because the controller box will use the PWM signal if enabled and control the fan speeds...are my assumptions correct?
@KleoYan
3 жыл бұрын
Hi Austin Parton me, I just woke up. The fan cable consist of 3 sets of cable. 1 set is for fan which is 4 pin and one set is 3 pin (unique 3pin connector). The 4 pin is for your fan to spin which is yes. It takes reading of pwm. As for the 3 pin is for your argb effects. At each output of the controller. It comes in a set. One for fan load one for argb load. Hope that helps
@greymoonz1
2 жыл бұрын
I believe something around 30 views are from me only just to tell how hard I struggled, but I got it working. Thanks buddy.
@KleoYan
2 жыл бұрын
Hi Grey Pawx Ttv, welcome to my channel. Am glad you have everything sorted out. Thanks for the feedback and I hope my videos did not confuse you. Especially with the new l-connect 3 which a lot have asked and got confuse with the l-connect 2. Again thank you for visiting and if you have question, don’t hesitate to ask and I will try my best to help you.
@theorulez
3 жыл бұрын
No wonder I couldn't do it right out of the box, I need that ARGB converter cable. Hm thank you.
@KleoYan
3 жыл бұрын
Hi Tdot, welcome to my channel. Do read my description as there are link to get the converter and if you have time, go though the dos and donts video too. All the best in your build.
@aminulhoque2021
3 жыл бұрын
Hi. do you know what cable i need to connect my lian li controller to my motherboard. i lost the cables that allow my motherboard to control my fan speed. its the cable that plugs into controller and also plugs into motherboard fan header. do you know what cable i need? thanks any help would be appreciated.
@KleoYan
3 жыл бұрын
Hi aminul hoque. welcome to my channel. just for your info, you do not need that cable if you only to controll the fans RPM. you can directly plug the fan connector of the SL fans directly to the motherboard and to use the motherboad to control the RPMs instead. but if you do need that cable, am sorry that you will need to contact lian li directly as ask if they are able to supply you or sell you a separate cable.
@algofire
2 жыл бұрын
Awesome video, Any chance you can post the cable layout for your connector between the Galahad fans and and the Uni Fan controller? I have some spare parts at home and was thinking of making my own converter.
@KleoYan
2 жыл бұрын
hi Vlad D, welcome to my channel., I do not have the actual layout for the coverter cables I did, but this is with the lian li argb cable kit. application is almost the same. Just for your reference this is the original Galahad with ST120 fans imgur.com/gallery/ErMZdQh if you wish to use the AL or SL fans, this is another diagram imgur.com/gallery/beYR8CN . as for how I did the cable converters, you can refer to the " Lian Li Uni Fan Controller- Custom Crimp Connectors" kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm
@XHYCoffee
3 жыл бұрын
Hi Kleo does this works with kraken x73 AIO matched with unifans sl120?
@KleoYan
3 жыл бұрын
Hi Hy L, welcome to my channel, pardon me as I do not own a Kraken x73 but after reading the manual online. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/viewer.html?pdfurl=https%3A%2F%2Fwww.datocms-assets.com%2F34299%2F1617978385-kraken-xmanual690x405020720forweb.pdf&clen=4527398&chunk=true , I only can assume is not possible to connect the x73 AIO argb to the uni controller. As the argb connector are different. However, you might want to try ask your questions here www.reddit.com/r/lianli/ as someone might have an answer for you with some kind of converter or sometime.
@colegunderson5682
2 жыл бұрын
Is it possible to have this setup but also have the controller connected to the motherboard to connect everything through asus aura sync in settings? I may want to switch between the 2 occasionally
@KleoYan
2 жыл бұрын
Hi Cole Gunderson, welcome to my channel, yes you can. just plug the argb cable between the uni controller and to your motherboard 5v argb header. As and when you want to switch to have motherboard take control, on your L-Connect, set it to motherboard mode, then you can use Asus aura sync to control the effects.
@colegunderson5682
2 жыл бұрын
Thank you so much! You are a huge help!
@colegunderson5682
2 жыл бұрын
@@KleoYan do I need to do that to both the Unifan controller and the Strimer controller or just the unifan controller?
@KleoYan
2 жыл бұрын
@@colegunderson5682 Just the uni controller. Your strimer conntroller should just plug the motherboard argb connector to the uni fan controller. switch the mode on the strimer plus controller to motherboard mode, this will allow you to controller the stimer plus too.
@R0nisize
3 жыл бұрын
Hi Kleo, First of all thank you for all your videos. I've built my Lian Li theme case using your videos and it helped me a lot. Regarding this video, at 9:10 you show us 2 splitters (for the bottom and rear fans) so we connect to the Lian Li controller. Does those splitters come with the fans or are they part of the ARGB cable kit from Lian Li? Thank you once again,
@KleoYan
3 жыл бұрын
Hi Joao Goncalves, welcome to my channel. Those splitters does not come with the Uni Fans, you will need to get them separately. for fan load you will need this PWM connector www.amazon.com/JBtek-Black-Sleeved-Splitter-Converter/dp/B01EF9OI0O/ref=sr_1_3?dchild=1&keywords=fan+splitter+pwm&qid=1614878866&sr=8-3 and for the argb splitter, you will need to get this www.superlightingled.com/3pin4pin-1-to-2-signal-splitter-female-to-2-male-for-ws2811-ws2812b-ws2813-ws2815-addressable-rgb-led-strip-lights-p-1815.html Hope this help. by the way if you do like my content, do remember to subscribe and to click on the notification bell. thank you very much :)
@richardramot2572
3 жыл бұрын
Would it i be able to swap the galahad fans for unifans and still have it all connect to the unifan controller?
@KleoYan
3 жыл бұрын
Hi Richard Ramot, welcome to my channel, yes you can do that not an issue.
@MrYodi2007
3 жыл бұрын
Why do i need an ARGB cable if the fans/AIo can connect to the controller directly? I'm lost!
@KleoYan
3 жыл бұрын
Hello MrYodi2007, welcome to my channel. If you only have the AIO and 3 x SL120 fans. sure you can do that. but if you going to plug more lian li products there are only four output on the uni controller.
@rafschi7747
3 жыл бұрын
Hey from Germany. Thanks for the video so that I could connect my 9 uni fans, the strimers and my Gallahad. I got the O11 Case Razer edition do u think there is a possibility to connect the led stripes from that case to the uni fan controller? With gskill ram there is no chance to control with L-Connect right?
@KleoYan
3 жыл бұрын
Hello Raf Schi, welcome to my channel. For the O11D strip, connect it to the strimer controller. there this third cable which you can do that. so that which i did explain on this video kzitem.info/news/bejne/umakz5Oqn5WJZpw if you are confuse how that works. read the manual drive.google.com/file/d/151v3Al6J36hiw_nKmSN4dpQOXWrDY-qq/view that says "Suppoer output compatible (WS2812B) Led control Signale [D1. GND] " thats where you connect your O11D strip to.
@XoXCrazyVietDudeXoX
3 жыл бұрын
I have the uni fan controller with the Lian Li ST120 120mm are they the same as the one you used?
@KleoYan
3 жыл бұрын
Hello NootNoot, welcome to my channel. If yours are ST120, yup those shown in the video are ST120 fans
@lunachop2566
2 жыл бұрын
Thanks for the info! I have two questions Kleo: 1.) You combined the AIO pump and fan RGB into the controller, but only the fan PWM went into the controller, does the pump PWM still go to the motherboard? 2.) Can I daisy chain a single AL 120 with a triple AL 120 and put that on one channel from the controller for RGB and PWM? \ Thank you for your help and expertise!
@KleoYan
2 жыл бұрын
hello LunaChop, welcome to my channel. I will answer your questions as follow : Q1) You combined the AIO pump and fan RGB into the controller, but only the fan PWM went into the controller, does the pump PWM still go to the motherboard? A1) yes I plug the galahad pump directly to the motherboard fan header. Q2) Can I daisy chain a single AL 120 with a triple AL 120 and put that on one channel from the controller for RGB and PWM? A2) yes you can plug the single AL fan to the existing 3 x AL fans, but you will need to get the lian li argb kit. One thing to take note. if you plug the single AL fans to the existing, when you set stack or mix.. the single AL fan will be treated as a single unit, it does not sycn up with the exisiting fan.
@lunachop2566
2 жыл бұрын
@@KleoYan Thanks so much Kleo, your expertise is hugely appreciated. I have one more question, I'm sure you've addressed it in an updated video but I can't find the exact answer. How do I pass control for the Strimer V2 L-Connect 3 controller to the Uni Controller? The L-Connect controller I have does not have the 4 buttons to push on the housing. I believe I wired everything correctly but I'm not getting RGB to the Strimer wires and I assume that's because I still need to enable control through the Uni controller. Do you know how to enable control without being able to push and hold a button? Thanks so much Kleo, you're the best!
@KleoYan
2 жыл бұрын
@@lunachop2566 Hello LunaChop, you will need the Strimer Plus V2 controller and not plug to your uni controler. Hope this video will explain more about the L-Connect 3 app. kzitem.info/news/bejne/pJ2s24l8npiXa4o
@lunachop2566
2 жыл бұрын
@@KleoYan I'm sorry Kleo, I wasn't clear with my wording. I have the strimer controller but I think it is a newer model. How do I switch the strimer controller to motherboard mode so the uni controller can control it? There is no M1 button on my strimer controller.
@KleoYan
2 жыл бұрын
@@lunachop2566 hi, for the v2 Strimer plus controller, you only have the option in L-Connect 3, under Quick/Sync lighting at the left sub menu. You will need to enable "motherboard Software sync" but when you do this. your uni fans will follow too. so that the downside of the V2 Strimer plus controller.
@Bonoscot
3 жыл бұрын
My galahad 360 keeps revving up and down,how can i control it manually? The other 6 Uni fans are fine
@KleoYan
3 жыл бұрын
Hi Bonoscot, welcome to my channel. I am assuming you are talking about the uni fans on your Galahad radiator. are those fans plug to the uni controller (both argb and fan load)? if you did that and did not plug the pwm cable between the uni controller to the motherboard fan header. you can control it through the L-Connect app. If you did plug the pwm cable between the uni controller to your motherboard fan header (example fan header name CPU_1), 1st make sure at bios/UEFI, set that CPU_1 fan header to PWM mode and not DC mode, 2nd on L-Connect, set the output where your rad fans are connected to PWM.
@CallMeFearS
Жыл бұрын
Bro I have only 1 argb header on my motherboard which I connected my cabinet front 2 argb fans. So if i buy a Galahad 360 uni SL edition and connect the controller with usb2.0 does it work? or do I have to connect the controller argb connection to the Motherboard also? Please help I am very new to this segment. All I want is to sync all my cabinet fans and Cooler fans into single effects. My Cabinet is Lian Li Lancool 216 My Cooler is Lian Li Galahad 360 UNI fan SL edition Also planning to buy a strimer plus V2 24pin and 8x2pin and 3xUNI SL fans
@KleoYan
Жыл бұрын
Hi zFearS, welcome to my channel. since you are getting strimer plus v2 and the galahad 360. you will have two controllers which is the SL uni fan and the strimer plus controller. so in your case is best to use the L-Connect 3 app. all you need is two USB 2.0 header on your motherboard, 1 is for your strimer plus V2 contoller and the other is for your uni fan controller to controller the argb effects for your galahad and your SL fans and your case fans.
@CallMeFearS
Жыл бұрын
@@KleoYan ok so Either USB 2.0 connector or ARGB connector needed to control the lighting effects, No need to connect Both right? Thank you for replying bro I was so confused before.
@KleoYan
Жыл бұрын
@@CallMeFearS hi, I think you should watch this video and have the basic understanding on how it works. kzitem.info/news/bejne/s6Noy6Gbsn-GdKA
@andyto4311
3 жыл бұрын
Hi! Thank you so much for the video. It was really helpful. I have a question if you don't mind. Does the Y splitter @ 9:13 and the 2male to 1 female rgb plug @9:37 comes with the Uni fans or AIO or do I have to purchase it separately?
@KleoYan
3 жыл бұрын
HI Andy To, welcome to my channel and thank you for the feedback. the Y Splitter @ 9:13 and the 2male to 1 female rgb plus @ 9:37 does not come with the uni fan or AIO, you will need to purchase them separately. I have listed the Y Splitter connector for argb connection in my description. As for the fan splitter is easy to find. I will list the Y Spliter argb connector for you below. Special Set - Daisy Chain aRGB connector from your rear fan to either top or bottom sets of fans ============================================================================= ‣ aRGB Y Split connector - www.aliexpress.com/item/10050... (3Pin 1 To 2)
@ChrisCasanada
3 жыл бұрын
Is it all possible to connect the EKWB Velocity D-RGB and the Bitsky GPU block in the controller together with 6x lian-li uni fans?
@KleoYan
3 жыл бұрын
Hello Christopher John Casanada, welcome to my channel, to be honest, so long is argb 5v it will be possible but you will need to 1st know what's the drawing amperage as each output of the uni controller is 2.26a. You will also need a converter to plug your fans to the uni controller. .. this might interest you as I have done on EK Vardar EVO 120ER D-RGB kzitem.info/news/bejne/w4OI4GaBj6OTnXY
@NinosShamo
3 жыл бұрын
I wish you dropped this video yesterday, I just set all my lian li fans up. Didn't know the radiator fans work with L-connect
@KleoYan
3 жыл бұрын
Hi Ninos Shamo, welcome to my channel. Opps! pardon me. If I know you I would have posted this video earlier. Maybe next time when you are cleaning up your pc. you can give it a go. once again thank you for the feedback and to have visit to my channel.
@屡有佳数ルーカス
2 жыл бұрын
I am wondering if the effects for the strimer plus are limited by using the software instead?
@KleoYan
2 жыл бұрын
Hi ya, if you are using the strimer plus v1, yes, there are limitation if you use l-connect. Infact you should get a v2 controller if you are using the v1 strimer plus. If you have that, you have more argb effects to play with the l-connect 3.
@isaiahmorales2574
3 жыл бұрын
Brother! thank you so much, your videos and instructions are top tier, and have helped me so much! keep on doing what you do! Much respect.
@KleoYan
3 жыл бұрын
Hi Isaiah Morales, welcome to my channel and thank you for the compliment :) all the best in your build too.
@jacobsomers3723
2 жыл бұрын
How do I change the speed of the pump because right now it’s making a kind of buzzing sound?
@KleoYan
2 жыл бұрын
Hello Jacob Somers, welcome to my channel, go to your UEFI of your motherboard and to your fan settings where your pump is connected. set it to DC mode and set to the profile which you can lower the pump cycle. I would advise you to have your galahad replaced if it's still under warranty. it might be a sign that your pump might fail if you do not get it fix.
@jacobsomers3723
2 жыл бұрын
@@KleoYan when I run my pump at full the noise becomes worse then before should I run it slower?
@KleoYan
2 жыл бұрын
@@jacobsomers3723 Hi, I will advise you to contact your seller or lian li to have the Galahad replaced. It's a sign of pump failure. you can choose to lower down the pump speed not an issue but how long will it last? That will be the question.
@jacobsomers3723
2 жыл бұрын
Thank you so much for helping me solve the problem I will be reaching out to Lian li to address the problem thank you for your fast reply’s and helpfulness.
@KleoYan
2 жыл бұрын
@@jacobsomers3723 you are most welcome.
@AustinBoil
3 жыл бұрын
I do have a question regarding setting the ASUS Bios for fan control. Using your configuration plus having the PWM wire connected to the MB, in the Bios what do you set the Aura setting to, ON or OFF? Also I'm assuming you set up a fan curve in the ASUS bios then turn on PWM to the fan set you wish to have the fan curve to use? Also I saw where you recommend plugging the Lian Li AIO into the CHA Header so the AIO always runs at full speed,. Have I missed anything on Bios settings that should be set? Thank you!
@KleoYan
3 жыл бұрын
hi Austin Boil, just for your info, I am not using an Asustek board but a ASrock board. Having to say this. based on Asustek motherboard bios, I would set Aura settings to on, if you intend to use the motherboard to controller the argb of your fans. this will give you a better picture on the connection and settings. kzitem.info/news/bejne/s6Noy6Gbsn-GdKA. as for Fan in your bios, I will set to PWM mode and set the curve there. so when you use your L-Connect application. you can select PWM. the same video will give you a better idea on how it works. kzitem.info/news/bejne/s6Noy6Gbsn-GdKA , if you ever need clarification, do let me know we can always communicate througth teams or zoom or etc.. will be glad to aid you, but during the weekdays am busy at work. it will be best to do it during the weekends. thank you!
@AustinBoil
3 жыл бұрын
@@KleoYan Thank you! I do use Teams so we will see how it goes & have that as a communication option. Setting MB to PWM makes sense for the fan curve then control via L Connect set to PWM. I did watch your other video showing the RGB & PWM wire connections on the MB. Will let you know how it turns out.
@KleoYan
3 жыл бұрын
@@AustinBoil ok, all the very best in your build :)
@vertigo_one
3 жыл бұрын
Where do you find those 3-pin ARGB Y splitters? I don't have any.
@KleoYan
3 жыл бұрын
Hi htxwn, welcome to my channel.. here you go www.aliexpress.com/item/1005001380598384.html make sure to select Color: 3 Pin 1 To 2
@jasonrives
2 жыл бұрын
Awesome video, however I have the same setup, 10 fans, galahad, and strimer plus cables, but what about the case o11 evo light strip? I can't use the 3p from the splitter connecting the strimer controller it says on lian li site. I do have another uni hub though, so if I use another hub, then I will need to go to two different lconnect to sync everything? Working with z690 msi carbon wifi which also has rgb...
@KleoYan
2 жыл бұрын
Hello Jason Rives, welcome to my channel and this might be your answer, your strimer plus controller has another cable which is 3pin, thats for your olld xl case argb to it imgur.com/gallery/kxd86ob
@jasonrives
2 жыл бұрын
@@KleoYan "any mistake your cable will melt or your controller will blow"... if the pc turns on or not, should be exciting either way.
@KleoYan
2 жыл бұрын
@@jasonrives hi ya Jason Rives. I forget to mention, you can use another uni controller too if you want to. And as why I’ve stated that clause. Which some have plugged instead of the in argb to the case controller. They plus out. Causing a short which will melt or blow either of the controllers. So ya, if you know what you are doing with the diagram I’ve provided, then proceed if not, use another uni controller. All the best in your build 👍
@MegaShizmo
3 жыл бұрын
Just ordered 7 Uni fans + Strimer for my O11 mini build. Will reference your video, great guide!
@KleoYan
3 жыл бұрын
Hi ya shiz.mo.. welcome to my channel and thank you for the compliment. by the way kindly note that the convertor I used are all self crimp.. so you will have to check on lian li official website on where to get their argb cable kit. by the way if you do like my content, do remember to subscribe to my channel and to click on the notification bell. thank you very much :)
@lulBean
3 жыл бұрын
If I wanted to do this exact 9-fan setup with a 240 Galahad AIO and both the Strimers, i can just order the Lian Li aRGB Cable Kit and not worry about the AliExpress splitters, correct?
@KleoYan
3 жыл бұрын
Hi lulBean, welcome to my channel. Yup and I have a diagram in my description imgur.com/gallery/beYR8CN
@lulBean
3 жыл бұрын
@@KleoYan Thank you! Although the i got the Lian Li STRIMER+ Triple 8-PIN GPU RTX 30 Series so that would need to plug into its own controller, I believe, but the rest of the process should be the same. Thanks again!
@KleoYan
3 жыл бұрын
@@lulBean yup. So long you have your strimer plus plug to it’s own controller and from controller to uni controller, you will be fine.
@djTO
3 жыл бұрын
Nice video. In your the last example (input 4, rear + bottom), are you able to control the argb of each fan individually?
@KleoYan
3 жыл бұрын
Hi dj66, welcome to my channel. the answer is no, you can control the rear fan if you did a y-splitter connection.
@billaegerter6436
2 жыл бұрын
Can’t you simplify by using two uni hub controllers?
@KleoYan
2 жыл бұрын
Hi Bill Aegerter, welcome to my channel. yes you can by using L-Connect 2 which I've done an overview kzitem.info/news/bejne/mndjsKtvmneboH4 and two other videos kzitem.info/news/bejne/yZCm4IaVbWtiapg & kzitem.info/news/bejne/kqRn06NsjXaoqY4 and if you've not realized, this video was created before L-Connect 2 was released by Lian Li. Thank you for your feedback and to have visited my channel.
@thelukeporter
2 жыл бұрын
Great video. Any idea where I can buy the converter cable you made to connect to the fan controller? I saw a link overseas but I was hoping to find a place in the US I could purchase it without committing to the entire Lian Li cable kit. Thanks!
@KleoYan
2 жыл бұрын
hi thelukeporter, welcome to my channel. will this work www.ebay.com/itm/255209413090 (select color orange) which is 5V 3PIN to SM 3Pin (Single to Single)
@thelukeporter
2 жыл бұрын
@@KleoYan Hey, awesome! Thanks for the prompt reply; ordering it now!
@KleoYan
2 жыл бұрын
@@thelukeporter you are most welcome. now I am not sure if you are aware of the limit of this uni controller. if not, do view the dos and donts in my playlist ( kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm ) as I wouldn't want you to burn your controller or uni fans or etc. picture when uni fan overload. imgur.com/gallery/KhS864W
@why2812
2 жыл бұрын
Hi, I am super confused! Can you help? I am just about to build my 1st PC in 15 years. I want it to have lots of RGB as apparently more RGB = more FPS. I have been following your video but am confused... Do I connect the AIO to the CPU header, the fan header or the pump header? If I don't connect it to a fan header, will the PC startup? If I need to connect fans to a fan header, which fans do I use? The ones on the radiator? If I just connect a few fans, how will the motherboard know what speed to run the other fans at? I have read about PWM but if only one set of fans are connected, surely only the speed of those fans will be controlled by the motherboard? Do I need to have the fans on the AIO running at full speed all the time? If so, how do I set it up so that the 1st time I turn it on, they're running at full speed? If its of any use, here's my part list... 5900 x processor 32 gb spectrix ram Rog strix b550-f motherboard Corsair SF750W PSU Lian Li SL 240 Galahad AIO 7 x Lian Li SL120 fans with controller Lian Li 24 and 8 pin strimer Lian Li ARGB cable kit
@KleoYan
2 жыл бұрын
Hi Why? welcome to my channel.. hmm.. lots of argb does not give you more FPS. Anyway for galahad AIO, the pump should plug to the Fan_CPU/Pump header and the radiator fans connected to CPU_FAN 1 header.. leave the argb to the uni controller to control the effects. if you overall getting confuse what is what. best way is.. have all fan load (RPM) of each sets of fans to your motherboard header. then for all argbs, let the uni controller to control it. now this diagram will explain to you about using the argb cable kit. imgur.com/gallery/beYR8CN
@why2812
2 жыл бұрын
@@KleoYan Thanks for the reply! So just to confirm that each group of fans should be plugged into the fan headers on the motherboard?
@KleoYan
2 жыл бұрын
@@why2812 to me yes cos u can have better control of different set of fan curve
@KleoYan
2 жыл бұрын
@@why2812 You can do it this way, leave the pump to the CPU_OPT/Pump/AIO fan header of your motherboard and connect only your radiator fan to CPU_FAN1, as why am suggesting this, in the event if the uni controller malfunction, at least your radiator fans are still working (A safety measure) As for the rest of the case fans, you can either plug to the respective motherboard fan header to control them or to connect them to your uni controller and to control their fan speed. it's up to you.
@kirito11
2 жыл бұрын
Thank you for the explanation but I do have a question. I have a Lian Li Lancool 2 Mesh RGB that has a built-in controller. Can I connect it all to the built-in controller instead of the Unifan controller?
@KleoYan
2 жыл бұрын
Hi Kirito, welcome to my channel, I do not encourage you to do so, as each controller has it's load limit. please view the dos and donts in this playlist kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm (this is the load limit of the uni controller) as for the load limit of your case controller, this I have no idea what's the load as I have already sold my lancool II case. So is better to be safe than sorry.
@kirito11
2 жыл бұрын
@@KleoYan I appreciate your quick response. I better stick to the unifan controller than taking the risk of damaging my components. Thanks again.
@KleoYan
2 жыл бұрын
@@kirito11 you are most welcome, all the best in your build.
@robertorgg137
Жыл бұрын
6:05 I don’t have mobo strimer but only gpu one so I don’t have the controller for strimer cables. Can I plug in directly to the other controller with that white cable ?
@KleoYan
Жыл бұрын
Hi Robertorgg, welcome to my channel. It's not advisable to connect the strimer plus to the uni controll, unless you are have the uni controller V2. (SL120 V2, AL120 V2 or even then SL-INF-120) . it's must advisable to plug the GPU strimer plus to your motherboard or if you fancy more argb effects, get the strimer plus V2 controller from Lian Li's offical store at aliexpress www.aliexpress.com/item/1005004239607087.html
@robertorgg137
Жыл бұрын
@@KleoYan otherwise if I don’t mind losing some effects on the strimer cable can I link the controller only via USB and the strimer cable via 3pin 5V ? Will it work ?
@KleoYan
Жыл бұрын
@@robertorgg137 Yup, that will work. pump and fans (SL-Inf-120) on uni controller via USB 2.0 to control the effects. GPU Strimer plus on motherboard argb header. this will work but as for the reverse fans which you've mentioned on my other content. I have no idea how the reverse fans are connected.
@jeffhannan103
2 жыл бұрын
hello kleo, what do you mean by "...... . . . use SL120 or sl140 FANS. Nothing else." I mean, I can use other brand of fans for example cooler master mf120, can't I? Ive seen your other video whereby you've used the EK Vardar fan. any tips or suggestion to clarify this matter?
@KleoYan
2 жыл бұрын
Hi Jeff Hannan, welcome to my channel and you are right. You can use other argb fans so long each of those fans does not have a argb load beyond 0.65 and to daisy chain more than 4 to a output of the uni controller. Now as I have shown here with nothing else. My bad, I was thinking interns of the L-Connect argb patterns as other fans is unlike the SL or AL fans which is able to do individual argb effect colors, else other fans will just follow the left overs which at lian Li productions. Hope that clarify your doubts. Thank you.
@jeffhannan103
2 жыл бұрын
@@KleoYan Thanks for the clarification. Means a lot to a newbie like me. Again. Thanks for the simple yet thorough explanation. Keep up the good work. All the best in your future videos. Liked and Subscribed!!!
@KleoYan
2 жыл бұрын
@@jeffhannan103 you are most welcome and thank you 😊 all the best in your build. If you need any help, do not hesitate to send me an email at godzylatech@gmail.com, I will try to aid you. 👍
@jeffhannan103
2 жыл бұрын
@@KleoYan thanks💪🏻💪🏻💪🏻. It is such a big help. Will do.. 🙏🏻🙏🏻🙏🏻
@jasondeblou6226
3 жыл бұрын
If I have 9 AL120 fans and a Galahad 360. Can I connect the 3 uni fan adapters and the 2 cables form the Galahad to the controller that came with 3 pack unifans?
@KleoYan
3 жыл бұрын
Hi Jason Deblou, welcome to my channel. maybe you can tell me your setup. example Top 3 x Uni fan Bottom 3 x Uni fan Front 3 x Uni fan on AIO radiator Rear ?? by the way what case are you using?
@jasondeblou6226
3 жыл бұрын
@@KleoYan 3x top, 3x side 3x bottom. O11 dynamic. I think I'm not able to control the fan speed if I connect the aio pump cable to the controller. So I'm thinking to plug the aio pump cable in the mobo ( strix x570 e gaming) and the argb cable in one of the groups separately in the controller.
@KleoYan
3 жыл бұрын
@@jasondeblou6226 Hi, base on what you have mentioned. this is how it should be Output 1 = 3 x fan top (both argb + fan load) Output 2 = 3 x fan side (both argb + fan load) Output 3 = 3 x fan bottom (both argb + fan load) Output 4 = only argb for galahad pump, the pump load goes to the motherboard.
@iMuz25
3 жыл бұрын
At 3:52 the white cable you said you made. How can I get one of those ?
@KleoYan
3 жыл бұрын
Hello Muz26muz, welcome to my channel. you can get the white cable here and please read carefully as you need the needle and the converter. read below. get the pin needle and the converter below. ‣ Pin needles - www.aliexpress.com/item/32706... or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/10050...
@casadoysoltero4144
3 жыл бұрын
Thanks you explication is very helpful
@KleoYan
3 жыл бұрын
Hello Casado Ysoltero, welcome to my channel and you are most welcome.
@gabrielyohe
3 жыл бұрын
Amigo me podrías decir el nombre del cambie blanco que pones en el minuto 3:56
@KleoYan
3 жыл бұрын
Hello Steyoh, I guess you are asking for the white cable converter I have done myself. here you go. ‣ Pin needles - www.aliexpress.com/item/32706628771.html or www.ebay.com/itm/224459128229 (you need to pull out one needle to fit the below converters) ‣ Converter - 1 To 1 Male www.ebay.com/itm/133521646617 or 1 TO 1 Female 5V 3pin www.aliexpress.com/item/1005001598378033.html
@unRealityFPV
2 жыл бұрын
These videos are WAY better than the instructions provided by Lian Li. They make it so easy AND so hard
@KleoYan
2 жыл бұрын
Hello joltax, welcome to my channel, infact I was like you too. I can't seems to comprehend lian li's videos without anyone illustrating, so I have decided to explore my options. anyway i have done other videos too which you might be interested. btw do take note of the dos and donts about this uni and do not go over crazy about adding more argbs. here is the playlist which you might be interested. kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm again, take note on the dos and donts. Once again, thank you for your visit and all the best in your build.
@whasselbusch
2 жыл бұрын
Kleo: where can I get the cable adapter you show at 3:45???
@KleoYan
2 жыл бұрын
hello Bill H, welcome to my channel, I did the cable myself but you can get it here. the official lian li store on aliexpress www.aliexpress.com/item/1005003182827084.html?
@Evilwizzie
2 жыл бұрын
So I’m trying to find the white cord on 6:09 and I can’t find anything
@KleoYan
2 жыл бұрын
Hello Evil Wizzie, welcome to my channel, select 1 to 1 male www.ebay.com/itm/373216795112
@Nothingishereyo
2 жыл бұрын
Man. You are the ONLY KZitemr that actually is explaining the complexities of Lian Li's ARGB system wiring. They have such terrible directions. Saving your video and subscribed.
@KleoYan
2 жыл бұрын
Hi Nothing is Here, welcome to my channel and thank you for the feedback. by the way I do have a series of videos about the uni controllers which you might be interested, kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm , while you are viewing, it will be good to watch the dos and donts about this uni :) once again thank you for visiting and to have subscribe to my channel.
@Nothingishereyo
2 жыл бұрын
@@KleoYan I know this is a long shot - but is there any way I can just pay you to walk me through the wiring portion of my build? I have all Lian Li fans, Lian Li AIO 360 Galhad, Corsair Commander Pro and the Lian Li fan hub and 3x iCue/Corsair RGB adapters. Everything will be here by the end of next week. If I have everything else assembled and just need to do the wiring over a video call would that be possible? I am on PST time.
@KleoYan
2 жыл бұрын
@@Nothingishereyo hi, I am not familiar with command pro from Corsair. I can only aid you with uni controller. You don’t have to pay me but I have no issues on a conference call during the weekends. But not this weekend though. My time is SGT. Just send a meeting invited at my email godzylatech@gmail.com and I will try my best to aid you.
@nitrqo257
3 жыл бұрын
What product did the controller come this or did you buy it separately if so then where?
@KleoYan
3 жыл бұрын
Hi NitrQ, welcome to my channel. all controllers come with the lian li products. you have one with the uni fans, one for the Galahad and one for the strimer plus. you might want to check out the lian li official website for more info.
@jvritola4191
2 жыл бұрын
If i have uni controller and i connect top fans 1 slot, bottom 2 slot, side 3 slot can i connect strimmer & back fan splitter wire to last 4 slot in uni connector? Will it work?
@KleoYan
2 жыл бұрын
HI JV Ritola, welcome to my channel. I would daisy chain the rear fan with a splitter to either the top or bottom fans. Let your strimmer plus to have one dedicated slot. This diagram will illustrate what I meant imgur.com/gallery/beYR8CN . Once again thank you to have visit my channel and all the best in your build.
@jvritola4191
2 жыл бұрын
@@KleoYan thanks! Just got my New Lian Li mini 11 Case & bought 9 SL fans + strimmers 🤩
@KleoYan
2 жыл бұрын
@@jvritola4191 Hi JV Ritola, welcome back and wish you all the best in your build 👍
@kezziekz
2 жыл бұрын
Should I connect the pump to pump_fan or cpu_fan?
@KleoYan
2 жыл бұрын
Hello KEZZIE, welcome to my channel. I would do this if I am you. connect the Pump to the pump_fan and for radiator fans, i will connect to the CPU_FAN. reason being, if you plug the radiator fan to the uni controller instead of the motherboard header, in the event if your uni fan failed. at least your fans are still cooling the radiator. I can afford to lose lightening effects but not fan stoping to cool the processor,
@PCG2022
2 жыл бұрын
Help! Great video but I have a question that I hope you or anyone reading this comment could put my mind to rest with before I turn on my PC for the first time.. I have the galahad with x3 fan AIO. The x3 fans click together with only 2 wires off the end of the set. I have connected these to the controller. Same as my other x6 fans as well leaving me with only 1 pair left on the controller for another rgb & a fan. I have connected the x3 connection coming out of the controller to the USB 2.0 on the motherboard. The fan to a fan header on the motherboard and also the RGB to a 3pin 5v header on the motherboard. The final connection of the 3 coming out of the controller would be my SATA which will go straight into the PSU. So my question is this and I hope I've explained good enough how I have connected the rest of the setup so far. There is 2 wires that come off the main AIO unit. One for the AIO pump which I have gone straight to the AIO pump on my z690 motherboard. Where do I connect the other one? The cpu one? Because in the instructions it states that I go to one of the inputs on the controller?? I have gone straight to the controller? But all these videos say I have to go to the main CPU fan header on the motherboard??? Is there anything I have done wrong? This is my first build and its the only thing bugging me. I know its a long comment but my PSU will be here in 1 day and It's the last peice before I turn it on. I have followed the instructions and checked over and over.What will it effect by me going to the controller and not the main motherboard header for example. Its a intel i9 12900k as well so she will defo need correct cooling.😉 Thanks for reading my comment & hope there is someone out there who can help. PCG
@KleoYan
2 жыл бұрын
Hi PC-Gamerz-UK, welcome to my channel, kindly allow me sometime to get back to you am pounded at work. I will try to assist you once am free from my work project. Thank you.
@PCG2022
2 жыл бұрын
@@KleoYan Thanks for reply Yan. I really appreciate it.
@KleoYan
2 жыл бұрын
@@PCG2022 you have not done anything wrong with the connection. The only part is that. I would plug the Galahad radiator fans directly to the motherboard fan header CPU_Fan and leave the argb connecting to the uni controller. So at all times these radiator fans will continue to operated even if the uni controller is malfunctioning. Hope this helps to clarify your thoughts.
@PCG2022
2 жыл бұрын
@@KleoYan I really appreciate your reply. So from my understanding I can just unplug the fan (only) connection from the controller and plug that into the main CPU header on the motherboard. This would then leave two slots available on the controller. 1 which is the fan from the x3 fans on the rad which I've just unplugged from say pair 2 and then the other would be the AIO pump connection which is just the RGB connection for the RGB on the Galahad display because the other cable goes straight to the AIO pump header on the motherboard. Hope that makes sense. PSU. On its way. 🙏
@KleoYan
2 жыл бұрын
@@PCG2022 yup. Correct. Anyway I always plug aio pump to motherboard header that is CPU_Fan/Wpump and set to dc mode and at full speed. Then for rad fans will be pwm mode with my own present fan curve. Anyway, all the very best in your build. 👍
@yuscastello7985
2 жыл бұрын
Hey Bro,wanna ask if i bought the STRIMER PLUS @ Sim Lim Square now its Faulty.But I have still use less 1years Still have the box,receipt how to exchange it?Go down to the shop or..?
@KleoYan
2 жыл бұрын
Hello Yus Castello, welcome to my channel. if you have used this strimer plus for more than 14 days, going down to the shop, they will ask you to approach local distro. My advise is to send in a RMA form here lian-li.com/contact-us/, attached the official receipt where you get it from. They will reply you on how to go by doing the RMA. do remember to write down the issue you are facing and with details. I have done 2 pieces of Strimer plus for friends and both, same process as i've mentioned to you. hope this helps.
@yuscastello7985
2 жыл бұрын
@@KleoYan I direct went to CORBELL SERVICE CENTRE 5days ago..Waahhh so good they exchange new Strimer Plus 24pin/8pin..Also wanna ask if u dont mind?DD4 Ram Corsair faulty how can i exchange?Thing is when i bought it @ Sim Lim Square i lost the receipt.Any idea?
@KleoYan
2 жыл бұрын
@@yuscastello7985 I would advise you to go back or call the shop where you get your rams from. ask them to provide you the receipt which is based on your crucial rams serial number, then approach our local distro, make sure you have the original box with the distro sticker on it. If shop does not have your receipt, which I doubt so, you can try call in to the distro and ask if you can RMA the rams. again make sure you have the distro sticker on the original box.
@yuscastello7985
2 жыл бұрын
@@KleoYan Ok thanks for your speedy replies.
@KleoYan
2 жыл бұрын
@@yuscastello7985 you are most welcome and good luck with your rams.
@CrossFyre1
3 жыл бұрын
So can i swap out the st120 fans on the radiator for AL120s or SL120s for a cleaner daisy chain?
@KleoYan
3 жыл бұрын
Hello KevTheBlackFox, welcome to my channel, yes you can do that not an issue. just a tip. if you intend to swap out those radiator fans with the AL or SL fans. let the uni controller controls the argb effect and plug your AL or SL rad fans 4 pin connector directly to the motherboard to CPU_FAN1. as some motherboard have warning detectors when fans that are connected to header CPU_FAN1 or CPU_FAN2/W_Pump. this is to play safe. Hope you understand what I mean.. same goes to your Galahad AIO , let the uni controller controls the lighting effects and the pump header directly to CPU_FAN2/W_Pump header.
@CrossFyre1
3 жыл бұрын
@@KleoYan thanks for the info.
@KleoYan
3 жыл бұрын
@@CrossFyre1 You are most welcome and all the best in your build.
@Justaspendthrift
3 жыл бұрын
Hi! Help! I’ve connected 12 fans and a galahad aio to my controller. Its spinning and also working in L connect but its not showing in the bios. i can only see the aio pump which i have set it to 100% as you said. i tried connecting with and without the controller’s fan/3pin rgb cable. both doesnt show on bios either. as in there’s no rpm on the particular fan header which i connect to. Tried on Cpu opt, Cpu fan, system fan all doesnt show. Btw im using X570s mobo updated to latest bios already. Please help!
@KleoYan
3 жыл бұрын
hi Aron Chua, welcome to my channel, something which you need to know, when you plug your SL fans (the Fan load connector) to the uni controller, you will only be able to see the RPM on L-Connect and not on your motherboard. the reason is, the pwm connector from your uni controller to the motherboard fan header, it's only 1 wire which is the RPM controller and not sensor, thats why your bios will not show, not even in HWinfo. if you want to show, unplug all SL fan fan load and plug it directly to your motherboard fan headers, leave the argb on your uni controller.
@Justaspendthrift
3 жыл бұрын
@@KleoYan Thanks for the reply!! Okay i connected the lian li controller fan to the system fan header, i use a 6 fan push pull rad on the top, should i set the fan curve in the bios and then go L connect and set that 2 set of fans to pwm. As it quite loud for me. Does it work like that? 🙏
@KleoYan
3 жыл бұрын
@@Justaspendthrift you that's correct. Maybe this will give you a better idea how the uni fan works kzitem.info/news/bejne/s6Noy6Gbsn-GdKA
@Justaspendthrift
3 жыл бұрын
@@KleoYan icic! haha i thought my mobo faulty 🤣 Anyways thanks alot! appreciate your guides man! its really good as im sure there are many people like me that needs help. keep it up! 👍
@KleoYan
3 жыл бұрын
@@Justaspendthrift You are most welcome and thank you for your kind words too.
@martinblaine4541
2 жыл бұрын
Hey, i just bought 9 SL fans and the strimer plus, do I need to get the controller?
@KleoYan
2 жыл бұрын
Hi Marin Blaine, welcome to my channel. I will advise you to use the uni control with your SL fans. do not just grab the lian li argb kit and daisy chain and plug to your motherboard. you might want to view this video on the dos and donts about this uni fans kzitem.info/news/bejne/sod-sImHr32on44 , infact I have a few video series about these uni fans which you might be interested. kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm
@martinblaine4541
2 жыл бұрын
Thank you so much for the reply! Your channel is really informative. Keep up the good work!
@KleoYan
2 жыл бұрын
@@martinblaine4541 thank you and wish you all the best in your build 👍
@PrimeSlime
3 жыл бұрын
Once again amazing video! This vid fixed the issue on my build. Thank you Kleo Yan for sharing!
@KleoYan
3 жыл бұрын
Hi PrimeSlime, you are most welcome. Incase if you need other info. I have a series of videos related to this uni controllers which might interest you kzitem.info/door/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9 😉
@nathanielfloydfortuno2703
2 жыл бұрын
Been looking for this tutorial for ages. Thank you very much this is a huge step for me. But I do have one question. I have a lian li g1 distroplate. Can I connect it to a second hub? If yes, can I still use one software for 2 hubs that I would have? I would really like to know your input on this one. Godbless you
@KleoYan
2 жыл бұрын
Hello Nathaniel Floyd Fortuno, welcome to my channel. yes you can connect your distro argb to the uni controller. if your distro plate comes with the standard argb 5v connector, you will need to have a converter. As for two controller, yes you can do that. just make sure your uni controller is ready for L-Connect 2 or 3. I have a series of videos about these argb product from Lian li which you might be interested on kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm and these are the videos you should be watching. 1) Lian Li UNI Fans SL120 - Dos and Dont's (Part II) kzitem.info/news/bejne/sod-sImHr32on44 ( understanding the load limit) 2) Lian Li Uni Fan AL120 & SL120 Controllers - Firmware and Features - kzitem.info/news/bejne/yZCm4IaVbWtiapg (How you can use 2 uni controller)
@nathanielfloydfortuno2703
2 жыл бұрын
@@KleoYan thank you very much for your reply. These are very helpful 😭😭
@KleoYan
2 жыл бұрын
@@nathanielfloydfortuno2703 you are most welcome hmm.. why are you crying .. stay calm, every problem there is always a resoution, cheer up buddy 😊
@nathanielfloydfortuno2703
2 жыл бұрын
@@KleoYan computer stuff is just too stressful sometimes 😅😅
@KleoYan
2 жыл бұрын
@@nathanielfloydfortuno2703 I see, just take a step at a time and you should be fine 👍
@carlupiclips2567
9 ай бұрын
nice video, in case taht i bought the unifan infinity, then the hue will only be compatible with infinity fans right? if that is the case... could i connect my lian li streamer cable to that infinity hue too? saludos
@KleoYan
9 ай бұрын
Hi Carlupi CLIPS, welcome to my channel. The strimer plus is too much ampere for the uni controller / Hub to handle. You should use the strimer plus hub or controller.
@carlupiclips2567
9 ай бұрын
@@KleoYan thanks for answer, is a little difficult fore me to ask in English. Hope You understand my questions :3, i write wrong the name of My cable, i Buy the strimer 3x8 pin to 12 and 3xunifan Infinity.
@carlupiclips2567
9 ай бұрын
@@KleoYan right now i have 3 fans that are corsair (only with blue light) 3 coming from the case( no light, just the PWM connector) and the 3 lian Li Infinity, plus the strimer 3x8 to 12 pins. My motherboard doesnt have enough pwm connectors or any argb (3 pins, 5v connector). So, i bought a generic pwm hub to all the fans ( except the lian Li ones) and the lian Li and strimer cable connected using their own hubs. My questions is if i'm doing it right about the cable connections, and if i using the hub for the strimer and the hub of the Infinity to the unifans x3 could the L- connect software recognize all My lian Li pieces to config the effects (strimer cable + unifans x3)
@KleoYan
9 ай бұрын
@@carlupiclips2567 yes correct, use hub for each Lian Li ARGB products. This content will help you out kzitem.info/news/bejne/pJ2s24l8npiXa4o .if you don't understand, I will try to help you. you can write in your own language. I should be able to translate 😉
@MatrixMixer
Жыл бұрын
Hi. Can the lian li 360 Galahad fans speed be controlled with Lconnect for cpu ? Because the fans speeds can only be controlled with msi motherboard since is connected to the mother board fan header. And pump for the pump header.
@KleoYan
Жыл бұрын
Hi Matrix, welcome to my channel then Galahad fans which are the ST120 by default. You can control them using the uni fan controller. Without the controller, you can’t. Hope this helps.
@MatrixMixer
Жыл бұрын
@@KleoYan thanks for that information. I do have uni fan controller for SL infinity fans with L connect software I can adjust fan speeds. But can’t on Galahad 360. It does display the fans..but no rpms or rgb. There’s no action when I change speeds or colors. Only through msi dragon software. How can I operate fan speeds through L connect for Galahad ? Thanks 🙏
@KleoYan
Жыл бұрын
@@MatrixMixer oh ok. Your device is a l-connect 3 device. Unless you have ab older controller which runs with L-connect or L-Connect 2. If not, I am afraid you can’t control your Galahad fans.
@MatrixMixer
Жыл бұрын
@@KleoYan thank you! Your video helped me a lot. I set the pump speed 100% and is this same for fans to have set rpm speed or fluctuating speeds with temperature by motherboard ?
@KleoYan
Жыл бұрын
@@MatrixMixer Hi, for Radiator fans which are the ST120, you can choose to run at full speed but for me, I will set it as PWM and set my own fan curve. this will help you understand what's DC or PWM mode. kzitem.info/news/bejne/rnmD0aaHsHiffoI
@JosetsyDark
2 жыл бұрын
Hi man, tomorrow I will build my first pc gamer I'm so nervous and last night I was watching your video again. I have a question, in the final step when you connect everything and it starts to work you connect just 2 things the sata cable and the usb cable to unihub (the controller)... Do I need connect as well the argb cable to argb header on MB or just with the sata and usb is fine??... I will control everything from Lian Li software L-connect 2. Thats my question, please if you can help me it would be amazing, thanksss :)
@KleoYan
2 жыл бұрын
Hi jose ignacio taibo galaz, welcome to my channel. You are pretty sharp, yup am only using the usb and sata on the uni controller. As I use L-Connect to control the argb effects. Now if you are using SL120 fans. Please check to see if there is a marking SL on the uni controller itself. If you do not have that, you can’t use the l-connect version 2.0 unless you do a firmware on your SL uni controller. If your SL uni contoller does not have the SL marking this video will aid you to do the firmware kzitem.info/news/bejne/yZCm4IaVbWtiapg
@JosetsyDark
2 жыл бұрын
@@KleoYan thanks bro, yes I have the new one the al120 fans with its respective control... So do I need use just sata and usb cable??
@KleoYan
2 жыл бұрын
@@JosetsyDark Yup, with just the USB and Sata connected. you are good to go.
@JosetsyDark
2 жыл бұрын
@@KleoYan thanks so much ❤️ your channel is the most usefull and complete, thanks again.
@KleoYan
2 жыл бұрын
@@JosetsyDark you are most welcome
@Twizz153
3 жыл бұрын
Hello, I had a question. I have 9 unifans, 3 will go on the side, 3 on the bottom and the last 3 will replace the stock fans from the galahad. All these fans will go to the uni fan hub, then I will also run the strimers through their controller with the special cable to the hub. However this leaves the argb from the galahad pump without a spot in the hub. How would I go about connecting it to the hub?
@KleoYan
3 жыл бұрын
hi No Name, welcome to my channel. get the 3pin aRGB Y-Spliter, connect your Galahad argb connector with the 3 fans on your radiator :) Special Set - Daisy Chain aRGB connector from your rear fan to either top or bottom sets of fans ============================================================================= ‣ aRGB Y Split connector - www.aliexpress.com/item/1005001380598384.html (3Pin 1 To 2)
@Twizz153
3 жыл бұрын
@@KleoYan Thank you so much, I had read a post on reddit mentioning a splitter but I didn’t know what the cable itself was called. I was able to find it on ebay so that it gets here to me faster. A 3 pin 1 female to 2 male JST SM Connector correct?
@KleoYan
3 жыл бұрын
@@Twizz153 Hi, if you could show me the link, I can have a look for you. Then I will be able to confirm with you.
@Twizz153
3 жыл бұрын
@@KleoYan www.ebay.com/itm/333850282204?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Dfed8042941f64347975d7296ba0fd6c1%26pid%3D100675%26rk%3D2%26rkt%3D15%26sd%3D123868297678%26itm%3D333850282204%26pmt%3D1%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Ad594d7a5-e165-11eb-9589-6adac24ef4d8%7Cparentrq%3A8fdda56d17a0ab84445aa93effd6d8cb%7Ciid%3A1 I chose the 3 pin option.
Another great video, thank you. This will save me heaps of stress 😄
@KleoYan
3 жыл бұрын
Hi Lofty Visions, thank you for your feedback..
@GiacomoPelizer
3 жыл бұрын
Love every video about Uni fan controller but i was wondering what if i connect 2 of these controller in same motherboard? should work just fine (wish to control 18 fans, 9 in each controller unit)
@KleoYan
3 жыл бұрын
Hi Giacomo Pelizer, welcome to my channel. I am afraid not so. The L-Connect version 1.0 will only detects 1 USB 2.0 connection. I do understand some motherboard have 2 x USB 2.0 header. If you plug another uni controller to the 2nd USB 2.0 header, it will not work. Previously, there is a L-Connect version 2.0 but was removed due to issues and errors, therefore Lian Li decided to remove this version till further notice. you might want to check their official website on the updates. They did mentioned to release it again, once it's stable. lian-li.com/product/uni-fan-sl/ scroll down and you will see the version 2.0 notice.
@krisonytube
3 жыл бұрын
I have the problem, that my Stimer cables start to flickering, when I'm using L-Connect software. If I bypass the l-Connect Software to let control the asus aura/amoury crate all works fine. I don't get it. I see people havig trouble with strimer using the motherboard software, but for me it's the l-connect software. anyone any ideas?
@krisonytube
3 жыл бұрын
I made it like in your video. like in your exaple. I'm using the strimer, galahad 360, 7 uni fans (3 + 3 + 1) and an o11 dynamic xl and with the lian li cable kit.
@KleoYan
3 жыл бұрын
@@krisonytube Hi, thank you for all your question. I would narrow down the issue one at a time. remove everything first. Try this basic troubleshooting steps A) Uninstall all apps (armory crate and L-connect) B) Only install the L-Connect then proceed with 1) 1) Connect your strimer plus to it's controller, remember to supply power with the sata cable, make sure it's functioning first. Now leave aside while it's still flashing. 2) connect your Uni Controller to the motherboard using the USB cable that comes with it, then on your strimer controller, set to motherboard mode first (press M1 for 3seconds till you see the flashes on your strimer plus stops. 3) plug the lian li argb kit which allows you to plug t between the strimer controller to the uni fan (Output 1 for exmaple) and see if the lights are back on. 4) If they are lighted up, launch your L Connect app, see if you can control the argb effects on the strimers 5) If your strimer does react. turn off your PC, if it flickers, it should be the uni controller having issues 6) if everything is ok, proceed to 7) 7) Daisy chained your ST120 fans using the connector Q. then plug your galahad argb 3pin with the 4pin (connector Q) to the converter needed to your Uni Controller (output 2) 8) Turn on your PC, see if all argb light up. if it does and once windows load up, launch your L Connect, play with the effects to see if you can control the argb of the Galahad block + ST120 fans. Also test out your Strimer too. 9) If everything ok, now install armory crate and trigger to use motherboard instead of the L-connect app. if it does not flicker, trigger back to L-Connect control. if it all works then problem solve but if you problem still return. I can only tell you that something is not right. it could be armory crate is overwriting the L-Connect app. other then this, i have no clue why is your strimer flickering, plus I do not own a Asus board. so can't advise you further.
@AceDotBoogie
3 жыл бұрын
Would it be a problem if I have the Lian Li STRIMER+ Triple 8-PIN GPU RTX 30 Series Extension Cable ?
@KleoYan
3 жыл бұрын
Hi Anthony Benjamin, I believe for the stimmer plus 1 x 24pin + 3 x 8pin has it's own strimmer controller like the 1 x 24pin + 2 x 8 pin srimmer plus. it should not be a problem so long your strimmer plus are plug to it's own contoller and then from the controller plug to the uni controller, just make sure that it's the only device that is plug to the uni controller and do not combine with other argb components. it will work and not overload.
@AceDotBoogie
3 жыл бұрын
@@KleoYan thank you, hopefully the Lian Li ARGB kit does it all as I intend to swap for AL120 fans on the radiator for the Galahad 360. I will have a total of 10 fans plus the 24pin Strimer and triple 8 pin GPU Strimer
@KleoYan
3 жыл бұрын
@@AceDotBoogie I see, you should not have a problem if you are using the argb cable kit from lian li. just make sure as what I have mentioned. plug only the strimmer plus controller to one output of the uni controller, you should be fine. Hope this diagram will give you a better picture, though this diagram is of a strimmer plus that only have a 2 x 8pin, in practice, it works the same. imgur.com/gallery/beYR8CN
@AceDotBoogie
3 жыл бұрын
@@KleoYan thank you!! Subscribing as well
@KleoYan
3 жыл бұрын
@@AceDotBoogie you are most welcome and thank you to have subscribe to my channel
@einnairo
3 жыл бұрын
I got that special cable now. My coonection is as follows. Strimer to rgb controller. Sata connected. Rgb to special cable to unifan controller. 3 unifan daisy tog and so only 2 cables to unifan controller. Unifan controller has a usb cable to mb, ans also sata plgged in. Under usb devices i can see lian li. But in lconnect, rpm is 0, lights cannot be changed. Any ideas?
@KleoYan
3 жыл бұрын
Which motherboard are you using? it could be the motherboard application is overriding the control. you might want to remove the motherboard argb utility app and test only the L-Connect application to see if it works.
@einnairo
3 жыл бұрын
@@KleoYan hi kleo thanks for coming back. I am using the gigabyte vision d-p. I have uninstalled the rgb fusion software which is from motherboard too already but still not working. Sad case. I wonder a full reformat will help. When installing, i did the rgb fusion first then lconnect.
@KleoYan
3 жыл бұрын
@@einnairo hmm.. ok two questions. 1st have you update the AMD chipset for your B550 board yet and did you try to connect the 2nd USB 2.0 header?
@einnairo
3 жыл бұрын
@@KleoYan yes i did. I installed gigabyte drivers first, then did the amd inf chipset. Its only chipset that i need updating right? At this point. Lian li did not appear still, i then updated bios and lian li appeared in usb devices. Edit: i also swapped usb 2 headers before lian li appeared.and by the way the lian li driver from usb device is some old driver from years ago. I wonder yours is similar.
@KleoYan
3 жыл бұрын
@@einnairo Aik.. am so sorry, though I did a series of video about this unit, I myself do not use this at all, I am not a fan of argb, am just curious, besides I have returned this unit the owner who borrowed it for me to do reviews. Now, these might be the troubleshooting steps you might want to try 1) unplug all connection, leaving only USB cable between uni controller and motherboard, also plug in the sata, the rest do not plug 2) plug only one Fan to see if it works 3) change cable link from the fan to the control unit, see if it works. 4) remove the driver from device management , reboot the device and let it reinstall the driver. see if it works. 5) if all else failed. I advise you to write in to lian li for support lian-li.com/faq/ or post your question here. www.reddit.com/r/lianli/ last but not least all the very best and stay calm ya.. do all removal and connection gently as I have friends who panic and end up plug in and out of those cables which end up breaking them and have to go corbell for replacement. RMA 2 months.
@JoaoSantos-rs9kp
3 жыл бұрын
finally, someone who help me to understand! ty so much 😁 I saw a lot of videos and no one have information about what I need, and u have! Good job still doing ur amazing content 👏👏
@KleoYan
3 жыл бұрын
Hello Joao Santos, welcome to my channel. I am gald my videos aid you in someways, by the way I did a whole series of video on this uni fans. you might be interested. kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm and for additional info, do watch the dos and donts about this unit. once again thank you to have visit my channel.
@shenarchvile
2 жыл бұрын
Great video, very detailed. However, I seem to be hitting a major snag. Using Galahad 360, 7 AL120, Strimer plus 24/8 and ARGB kit. I've followed the steps exactly, however only the pump works, the fans don't spin and only the RGB of the strimers light. Using LConnect, I can see the 4 groups, but it had no effect. Additionally, the only variation would be the adapter cable - the one that comes with the kit has 2 ends, which I've only used one each. I've tried just setting the galahad and it's rad fans to '1' and disconnecting the other items, but the same problem persists. Devices work when plugged directly into motherboard (rgb & fan header) Motherboard model - Asus B550F strix. Is it possble you might be able to help me figure this out?
@KleoYan
2 жыл бұрын
Hi ArchvileX, welcome to my channel. Do you happened to have the Armory Crate installed in your system to control other argbs, like your GPU and rams. If you have, try this. uninstall the amour crate, using revo uninstaller. www.revouninstaller.com/revo-uninstaller-free-download/ . next remove your L-Connect 2 app. reboot your system, once boot up check to see if you can see the the L-Connect device under Universal Bus in device management, then install only the L-Connect 2 app, test out the fans and argb effects. see if that works.
@shenarchvile
2 жыл бұрын
Thanks for the quick response, however I just figured it out right after I gave up, and you'll prob have a laugh at why. I kept wondering how all the devices attached to the Uni Controller could possibly be drawing power from the USB 2 header..then I realized BOTH the Strimer Controller and the Uni Hub need sata power! 🤦. Reattached everything and it works! Now I just have to arrange my fans so I can create effects in a sync direction (I missed the lconnect 3 sign. Again, thanks so much for this detailed tutorial, and hopefully anyone else who might make my mistake will see this!
@KleoYan
2 жыл бұрын
@@shenarchvile you are most welcome. Btw am not sure if you are aware of this. There are limitation to the uni controller, so don’t go by keep adding argb which will overload the controller. You can view the dos and donts of this uni controller in this playlist kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm once again thank you to have visited and all the best in your build 👍
@shenarchvile
2 жыл бұрын
Will do This will be the extent of the Rgb to be added, so hopefully it's fine. If not, can I use a second controller and it sync perfectly?
@KleoYan
2 жыл бұрын
@@shenarchvile if you are using the L-Connect 2 yes you can add another controller. no issue.. just remember to plug the sata this time 👍
@michaelkilmartin693
3 жыл бұрын
Excellent video. Precisely what I was looking for, thank you. Will this system configuration work with the AL120 Fans well?
@KleoYan
3 жыл бұрын
Hello Michael Kilmartin, welcome to my channel and most welcome. It does apply to AL fans. Both same concept.
@OOSAMH
3 жыл бұрын
Hey Kleo, Can I connect 2 uni fan hub and control it via software?
@KleoYan
3 жыл бұрын
Hi FTXKSA, pardon me for the late reply and welcome to my channel. For the moment you can't. Lian Li did have the multiple L-Connect application for this but due to issues, they removed it from their website. They will be developing a more stable application. you might want to check out on their official website, under the software download section lian-li.com/product/uni-fan-sl/
@tsukichiakai8799
2 жыл бұрын
I bought Lian li AL120 that came with a control board.Can someone tell me if this works. I will plug the 2 fan into the CPU header (using a splitter) that way it will automatically decrease and increase fan speed depending on CPU's temperature. I will then plug the pump into the Pump header that way it will run at full speed for faster water circulation. This is where I'm abit hesitant. Can I plug the RGB connectors of my Lian li Galahad 240 Unifan SL edition to my Lian Li AL120 control board.? will it fit or will it overload the board?
@KleoYan
2 жыл бұрын
Hi Tsukichi Akai, welcome to my channel. yes you can plug the AL120 fan load with a splitter to the CPU fan header and your AIO pump to the pump header. But for argb connection. the controller you have is for AL fans only. if you plug the SL fans into this AL controller, it will not function properly. The AL Controller has it's firmware for ALfans only. and you can't firmware the AL controller to accept SL effects. you can refer to these video kzitem.info/news/bejne/yZCm4IaVbWtiapg and kzitem.info/news/bejne/kqRn06NsjXaoqY4
@tsukichiakai8799
2 жыл бұрын
@@KleoYan So then I can only control AL120 via software and SL will stay by its default color?. is there i way i can make them function like using 2 different Lian Li software?
@KleoYan
2 жыл бұрын
@@tsukichiakai8799 nope you can't unless you have a SL controller. now i have never gotten a Galahad that comes with the SL Fans. is there a controller provided with this AIO you have purchased? if yes, then your safest bet is to make use of this argb controller that comes with the Galahad AIO.
@tsukichiakai8799
2 жыл бұрын
@@KleoYan okay. I was able to exchange my Lian li 240 Galahad 240 UNI FAN SL EDITION ARGB into a Lian li 240 Galahad closed-Loop ARGB. it does not say what editions the fans are on this new AIO i got. what do you think?
@KleoYan
2 жыл бұрын
@@tsukichiakai8799 hi I was asking if your AIO SL edition are there any controllers? OK does not matter now as you have changed it. I assume you gotten the original version of the Galahad AIO. Those fans provided are ST120 if you want to connect those to your uni sl controller. You will need the Lian li argb cable kit as it contains the converter you need inorder to plug those ST120 fans. Alternatively. The original Galahad does come with the argb controller. You can use that to control the ST120 and your pump argb effects.
@rodemparas8562
3 жыл бұрын
nice video! i have a question, can u use different brand fans with lian li app? or connect different brand fans to ur uni fans controller?
@KleoYan
3 жыл бұрын
Hello rodem paras, welcome to my channel, the answer is yes, but before you do that, I would advise you to go through the dos and donts about the uni controller kzitem.info/news/bejne/sod-sImHr32on44 once you understood what's the limitation. These are the EK Vardar EVO 120ER Fans which I have used on this uni controller kzitem.info/news/bejne/w4OI4GaBj6OTnXY
@rockinick
2 жыл бұрын
I am really struggling. I have a kraken z73, 3 uni fans, and 2 strimer cables. I am lost on how to hook it up
@KleoYan
2 жыл бұрын
Hi Nicks, welcome to my channel. I can understand your frustration. now you will need to know both these products do not work hand in hand together. Uni controller will only be able to control the SL/AL/Strimmers or any Lian li argb products. This will take up one of your USB 2.0 header from your motherboard. As for the NZXT Kraken Z73, it has a unique LCD display which make use of it's own app, therefore you need another USB 2.0 headaer from your motherboard. I am able to aid you to some limit but may I ask how you intend to set it up. these are my questions 1) How many SL or AL as case fans, top? bottom? side? and which motherboard model and PC case are you using 2) Are you replacing the NXZT radiator fans with the SL or AL fans? if you are able to tell me in details what you intend to do. I might be able to draft out a diagram for you to follow.
@rockinick
2 жыл бұрын
@@KleoYan I appreciate the response! I have 9 total AL 120 FANS. 3 fans are mounted to the radiator for the Kraken. It's a Lian Li O11 dynamic case and my motherboard is an Asus Crosshair VIII Hero.
@KleoYan
2 жыл бұрын
@@rockinick Hi, I have split two parts for you here, download the diagram and execute part I then follow by part II imgur.com/gallery/rGxCQ87 and please read the description while you are downloading it.
@rockinick
2 жыл бұрын
@@KleoYan that worked perfectly thank you so much for doing that!!
@KleoYan
2 жыл бұрын
@@rockinick you are most welcome. All the best in your build👍
@roryjai
3 жыл бұрын
Thank you so much for this! Would you mind doing a quick video on how you created the 3pin to Female SM3P? I'm from Canada and I cannot find this product and the links you linked are expired. I don't have any means or purchasing it or the Lian Li cable kit (sold out).
@KleoYan
3 жыл бұрын
Hi roryjai, welcome to my channel, ok will do.. I will do that this weekend then :) do remember to subscribe and to click on the notification bell. thank you!
@roryjai
3 жыл бұрын
@@KleoYan Oh ya, subscribed and liked. Will be a lifer if you can help me out. I hate how Lian Li products are not compatible with each other.
@KleoYan
3 жыл бұрын
Hi roryjai, I have not forgotten your request but will need to wait as this week am pack with my work. sorry to keep you waiting and thank you for your patience
@roryjai
3 жыл бұрын
@@KleoYan Oh no problem. I put my PC together, just waiting on the video to make the cable. the AOI and pump are not sync'd lol.
@KleoYan
3 жыл бұрын
@@roryjai hi am sorry to keep you waiting for 2weeks as due to my busy work schedule. I have done up the video as you have requested and it should be out in 3hours time. Thank you for your patience.
@nephew455
3 жыл бұрын
Hello I already have the stimer plus 24 and 8 pin and I am using that controller to control the lights because my mobo is only 4pin/non argb. If I bought a single fan, the (Lian Li UNI Fan SL140 RGB x1 140mm) could I connect the fan somehow to the controller provided with the strimer plus? Or do you know if I would need to buy something additional? thanks if you see this
@KleoYan
3 жыл бұрын
Hi nephew455, welcome to my channel. You can't connect the SL140 to the strimmer controller. You will need a separate argb controller for your SL140 fan. You will also need a converter to plug the fan argb to the separate argb controller.
@nephew455
3 жыл бұрын
@@KleoYan I see, thanks for your reply. Keep up the good work
@KleoYan
3 жыл бұрын
@@nephew455 thank you and all the best in your pc build 👍
@FeddrickJawi
3 жыл бұрын
Hi Kleo, I need your advise, I am planning to mount 3xSL120 on Galahad 360 AIO purely for aesthetic. As for the connection for the set of fan on radiator, should I just connect to the controller?. My mobo is Aorus pro wifi z390
@KleoYan
3 жыл бұрын
Hello Fredrick Jami, welcome to my channel, I would advise to connect the SL120 argb to the uni controller and the fan load connector to your motherboard CPU fan header. This way your motherboard will sense the temperature and to adjust the rpm of your SL120 accordingly.
@FeddrickJawi
3 жыл бұрын
@@KleoYan sweet, thanks bro
@KleoYan
3 жыл бұрын
@@FeddrickJawi you are most welcome.
@maxkent6596
3 жыл бұрын
This is amazing so helpful just what I needed Thank you!!
@KleoYan
3 жыл бұрын
Hi Max Kent, welcome to my channel and you are most welcome. by the way I do have a series of videos about this unit. this might interest you kzitem.info/door/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9 and if possible. view the Dos and Donts too. thank you very much!
@richardnagy2181
2 жыл бұрын
Where do i connect the unifan controller at the end when everything is pluged in??
@KleoYan
2 жыл бұрын
Hello Richard Nagy, welcome to my channel. In this illustration. I have only plug the USB cable between the motherboard and uni controller. as the controller can control the argb and PWM of the SL fans. Not forgetting that it can also control the Galahad and strimer plus ARGB. if you have intention to use motherboard to controller the fan speed and argb, you can also connect those cables which are provided by the SL120 + Controller kit. hope that answer your question.
@richardnagy2181
2 жыл бұрын
So i can connect the uni fan controller to my motherboard and thats it? Or do i need to connect it also to the psu? Thank you for your time
@KleoYan
2 жыл бұрын
@@richardnagy2181 hi, I think is best if you learn the basic on how the Uni controller work first. I advise you to go through part II and Part II first. part II about the dos and donts kzitem.info/news/bejne/sod-sImHr32on44 then follow by part II, the basic on how it's connected and how it works kzitem.info/news/bejne/s6Noy6Gbsn-GdKA there are other vidoes I have done, but the basic are from Part II and Part III, understand the concept how it works then you can refer to this playlist for other lian li argb products. kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm
@Cleverconveyence
3 жыл бұрын
what about the lian li lancool 2 leds?
@KleoYan
3 жыл бұрын
Hi post-buttwave, pardon me I miss your question, about the Lian Li Lancool 2 leds, are you referring to the argb strips? you connect that to the Strimer plus controller. there is a third socket with is meant for that. you might want to check your strimer plus manual and sorry again to have miss your question.
@alvinkumar79
3 жыл бұрын
Can I daisy chain the case led strip with both strimers into the unicontroller? Case is o11 dynamic xl black. It has a small rgb hub with sata power for the front panel led strip Thanks.
@KleoYan
3 жыл бұрын
Hi Alvin, I believe you can do that, but you will need the strimer controller. if you notice the Strimer controller, one is for sata , one is for argb cable to the motherboard, which I have shown you here, to be plug to the uni controller. now see the last plug of the strimer controller, you can plug the XL argb cable to the strimer controller. once done, you will need to press on your case argb button to set it to motherboard mode. I don't have a case but I have done that for a friend which works. you will need to figure it out on the connection. I would advise you to head down to lian li official website and look for info or even on their official youtube channel kzitem.info on this. thank you!
@alvinkumar79
3 жыл бұрын
Thank you, I did not realize that third slot was an input. Thanks for your videos and your help.
@MrN00bas
2 жыл бұрын
Can I switch AL fans with fans on galahad? I want 1st slot on controller galahad + 2 AL fans on radiator, 2nd will be strimers, 3rd will be 3 AL fans at bottom and 4th I want 1 AL fans at top+1 AL fan at rear+2 fans from galahad. Will everything works? 😅 edit:ofc I have AL controller as I have AL fans, so Q is if I can mix galahad fans same as you mixed it with SL ones. I need that daisy chain 2 galahad fans + 2 AL fans 🙄
@KleoYan
2 жыл бұрын
Hello Michal Maxim, welcome to my channel to answer your questions Yes it can be done this way. 1) Switch Galahad radiator fans from ST120 to AL120, Yes this can be done no issue 2) Plug Galahad pump directly to motherboard header (example Sys_FAN1/W_Pumo) 3) Slot 1 of Uni controller - Plug Galahad radiator fans AL120 4) Slot 2 - Plug Strimer plus to uni controller. Make sure is from Strimer plus controller to uni controller using lian li argb cable kit 5) Slot 3 - Plug Top AL fans + 1 x Rear AL fans use lian li cable kit to daisy chain from top and rear fan 6) Slot 4 - Plug botton AL fans
@MrN00bas
2 жыл бұрын
@@KleoYan All understood, but at step 5, I want 2 AL fans + 2 fans from galahad, so mixed daisy chain of 4 fans. Mby I wrote it wrong at 1st post. Can this be done? Edit: or it cant be done and I have to buy 2 more AL fans. because I have 011 dynamic mini and radiator intake at side, and backside of galahad fans is ugly so thats why I want them put at top exhaust or if it cant be done will biy 2 more AL.
@KleoYan
2 жыл бұрын
@@MrN00bas I see now ST120 have 4pin argb connector and AL have 3 pin argb connector. If you know how to diy. It’s possible. But to find a really made splitter. It will not be easy. Maybe search your Galahad accessories to see if there are such converters from 4 pin to 3pin as the uni controller takes only 3pin. Also if u did have it mix, your st120 fans might not response properly with the l-connect instructions
@MrN00bas
2 жыл бұрын
@@KleoYan i somehow find all needed cables to daisy chain all 4. My concern is, is there any chance something will burn or stuff like that? And yes, leds my not work properly because of different fans, will see.
@KleoYan
2 жыл бұрын
@@MrN00bas if you go accordingly to how they are connected. you should not be burning anything. just make sure that the uni controller is plug with power stat source from PSU and same apply to your strimer plus controller.
@AustinBoil
3 жыл бұрын
For anyone wanting a seamless integration of fans, RGB, Strimers, etc. this combo is fantastic. I used the Lian Li 011 Dynamic Mini, ASUS B550 MB, & all Lian Li Uni-fans, AIO 360, Strimers, etc. & with the L-Connect s/w if's a beautiful thing. Minimal wiring required for a normally complex wiring maze. Kleo's wiring diagram was very helpful. Note: Order the Lian Li cable accessory kit, it comes with everything required for full integration.
@KleoYan
3 жыл бұрын
Hello Austin Boil, welcome back 🙂 am glad you got your build up and running. Thank you for the feedback 👍
@TheMuscleCow
3 жыл бұрын
Have you heard about issues with these units catching fire? I've seen a few different posts on this from different people wo was concerned... One of them showed an image of the Sata Power connector on a good and bad set where the bad one had two loops/bends in the wire and the good had only 1. Looked like maybe some sets were sent with improper wiring?
@TheMuscleCow
3 жыл бұрын
Reddit post finding a possible QC issue: www.reddit.com/r/lianli/comments/kjr8ms/warningpsa_psu_short_caused_by_uni_fan_sata_power/? Reddit post for someone that had 2 units catch fire: www.reddit.com/r/lianli/comments/lpjbho/lianli_unifan_hub_cable_burned_out_with_flamesmoke/
@KleoYan
3 жыл бұрын
@@TheMuscleCow welcome to my channel, thank you for your good intension, greatly appreciated it :) in one of link you have posted. I was in it, answering in general :) I am very aware of this even before Uni Fans are out as I use to play with argbs alot but I stop, plus my current build does not have argb, only RGB. before the cases that happened at reddit. I already know some will encounter the issues as some will just go crazy connecting more and more lightings, that's part of the reason why I did the dos and donts to warn others what's the limitation of the unit kzitem.info/door/PLEW-b-2vYDdM1WklGQps2-sQ1Amy6Uwn9 . sad to say it was too late plus some other reviewers encouraging others to daisy chain more that 4 fans to one output of the uni controller. nevertheless, thank you for your notification :) I forget to mention, I always test controllers and such first before I piece them into my pc.
@nathannat6145
3 жыл бұрын
if i buy the lian li aRGB cable kit does it come with the converter for the strimer to uni?
@KleoYan
3 жыл бұрын
Hi Nat The Jar Cat, welcome to my channel, if you purchase the lian li argb kit. yes and you might want to see this simple diagram which might help you imgur.com/gallery/beYR8CN
@nathannat6145
3 жыл бұрын
@@KleoYan ahh i see now, thank you! ill get ordering as soon as i can afford them 😅
@KleoYan
3 жыл бұрын
@@nathannat6145 you are most welcome and all the best in your build 👍
@nathannat6145
3 жыл бұрын
@@KleoYan thank you! have a great day
@michaelkilmartin693
3 жыл бұрын
In minute 9:11, you mention a Y splitter. Could I connect/daisy-chain the fans together; thus, I only need one cable for two fans instead of using a Y splitter? The AL 120's have the ability to be daisy-chained correct? I am using the AL120 fans in pretty much the exact same configuration you have. Except, I will have the Galahad fans on the outside of the radiator pushing air over the fins and the AL120's pulling that air into the case. The 3rd fan will be my exhaust. You can see what I am talking about on this video kzitem.info/news/bejne/xoqP3KKiiKKBY6w Thanks again for the video.
@KleoYan
3 жыл бұрын
Hi Michael Kilmartin, I just want to be sure if this is your configuration. the radiator is a push pull configuration on a 240mm Radiator and a rear fan. I do understand you can plug 2 pushed fans of the radiator to one output of the uni controller and 2 pull fans of the radiator to another output of the uni controller. that should not be an issue without using the Y splitter, but you need to make sure both sides sync up with the rpms. one more pointer. if you intend to do push pull configuration, is best to use all of the same type of fans..
@michaelkilmartin693
3 жыл бұрын
@@KleoYan comments noted. I will get another 2 AL120's when I can. thank you for the information.
@KleoYan
3 жыл бұрын
@@michaelkilmartin693 hi ya, you are most welcome. You gave me an idea with another video and will use your question on this :p. Thank you 😊
@michaelkilmartin693
3 жыл бұрын
@@KleoYan Happy to help the process. Keep up the great informative content!
@KleoYan
3 жыл бұрын
@@michaelkilmartin693 thank you and greatly appreciated your feedback too 👍
@TsinghuaWu
3 жыл бұрын
Don't we need 1 of the fans or 1 set of fans to be connected to the cpu fan header otherwise there'll be an error on boot up?
@KleoYan
3 жыл бұрын
Hello TsinghuaWu, welcome to my channel. yes, I forget to mentioned that. now for that we have the Galahad Pump to connect to which make use of full speed which I have illustrated in this video.
Пікірлер: 696