Hello, greetings from Brazil! I ended up coming across the video after hours of research and would like to know if there is already a link available to purchase this controller. and if I can control my SL 120 fans the same
@KleoYan
10 ай бұрын
Hi hugo carvalho, welcome to my channel. I am not sure if you can view this, it's Lian Li's officer online shop at aliexpress. www.aliexpress.com/item/1005004239607087.html (Lian-Li Strimer L-Connect 3 Controller)
@jamesboat-pf5bs
Жыл бұрын
Great video, really helpful again... Thank you 👍. Dude, where are you from? I can't place the accent
@KleoYan
Жыл бұрын
Hello James Boat, welcome to my channel and thank you for your valuable feedback. I am from Singapore.
@witchdoctor2333
Жыл бұрын
truly need help. i have these cables and the controller. my issue lies that i have only two cables that have rgb going through them. yes the cables work rgb aside. idk why they are only running 2 wires with color though and im at a lose
@KleoYan
11 ай бұрын
Hi Enimate, welcome to my channel. Do pardon me for the late reply, for some reason, I didnt get the notification alret when you commented, till I screen through my content. I am not sure which 2 cables are you referring to. If you issue is not resolve, can you take a screen shots of your cables and send me via email godzylatech@gmail.com . I will try to help you out. Sorry again for the late reply.
@markfalina9160
Жыл бұрын
Corsair's iCUE lets me pulse fans/lighting strips with the music I'm listening to. Does L Connect 3?
@KleoYan
Жыл бұрын
Hi Mark Falina, welcome to my channel, so sorry to say, nope the uni controller does not have this function.
@puddleduckist
2 жыл бұрын
Very 😎, can't wait to use these in my new lian li build. Thanks for all you do my friend!!
@KleoYan
2 жыл бұрын
Hello Evil Bane. Welcome back. Saw your other comment and congratulations. You will sure to like the new v2 strimer plus as compared to the v1 strimer plus😉
@el-dete
Жыл бұрын
let me be sure if i get it rigth and correct me if i am wrong. so, we bougth the "strimer plus" and de controller the comes within the box will not work, so after buying it we have to look for another controller in order to make it work? In my box came that same controller that you show in the video and it is true k does not bring usb connection to the motherboard. So if you are so kind as to tell me what I should do to make it work. buy the other controller or what?
@KleoYan
Жыл бұрын
Hi fernando gonzalez estrada, welcome to my channel. if you have this controller www.aliexpress.com/item/1005004239607087.html?spm=a2g0o.store_pc_allProduct.8148356.43.113a29c10vo82G&pdp_npi=2%40dis%21SGD%21SG%24%2028.50%21SG%24%2028.50%21%21%21%21%21%40210321ea16722017324817270e2800%2112000028490973731%21sh then you dont need to purchase but if it's of version one then you will need to purchase, inorder for it to work with L-Connect 3.
@texaselite6605
2 жыл бұрын
Im going to be buying the new strimmer. Now i already have lian li fans. I dont have nzxt hub. Im using the lian li hub that came with my lian li fans. Can i connect it that to right.
@KleoYan
2 жыл бұрын
Hi Texas Elite, welcome to my channel, it will be advisable to plus your strimer plus v2 to its controller and to plug the usb cable from its controller to your motherboard usb header. This way you will have more argb effects. Btw it defeat the purpose of connecting your strimer plus controller to the uni controller as you lose the new argb effects designed specially for your strimer plus v2, using the L-Connect 3 application.
@denniscorsiga9678
2 жыл бұрын
the l connect 3 app is very slow...updated to the newest version but still slow...any solutions thanks man
@KleoYan
2 жыл бұрын
Hello Dennis Corsiga, welcome to my channel. I do not have any solution for you but you might want to try these steps to see if it helps.. instructions as follow : Basic Troubleshooting steps 1) Make sure you motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there is, kindly update those bios firmware version. 2) Make sure your chipset driver for your motherboard is up to date!. For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html 3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that. Else use Revo uninstaller ( www.revouninstaller.com/ ) to uninstall the apps as mentioned. Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzitem.info/news/bejne/1oOdu42fmp2hq4I 4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second 5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard. If your monitor has a KVM build in remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard is connected to your monitor, please remove them and plug them directly to your motherboard instead. 6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output. 7) Plug the power cable and turn on your PC 8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller. 9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.2.6) 10) After installation, run the program, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON. 11) Reboot your system. 12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed. 13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16) 14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again. 15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses) 16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
@lawrencekenn
Жыл бұрын
bro STRIMER PLUS V1 is it compatible to connect to V2 Controller ?
@KleoYan
Жыл бұрын
hello Lawrenece Kenneth Lago, welcome to my channel, yes strimer plus V1 is compatible with the V2 controller, no issue.
@souved
3 ай бұрын
Hello, does it have the audio spectrum effect?
@KleoYan
3 ай бұрын
Hi Souved, welcome to my channel. It does have the audio spectrum effect but that does not react on sound. it's just for show.
@TmBaxiiiC
2 жыл бұрын
Great Video! I Got the Strimer Plus v1 Cables. So i won't be able to do these Settings with L-Connect 3? Can i get the v2 Controller separately and would my system recognize the v1 cables with the v2 controller?
@KleoYan
2 жыл бұрын
Hi eQuiinoX, welcome to my channel. infact both V1 or V2 strimer plus stripes will react when you plug them to a V2 controller, you can just purchase the V2 controller separately to use your current V1 strimer plus strips.
@aspy6286
2 жыл бұрын
@@KleoYan this is so amazing. Thank you for showing us!
@KleoYan
2 жыл бұрын
@@aspy6286 hello Aspy, welcome to my channel and am glad you like it. 👍
@lorenzodiaz7385
9 ай бұрын
Thank you for such a detailed video. Looking forward to buying the controller with strimer cables
@KleoYan
9 ай бұрын
Hi Lorenzo, welcome to my channel. I am glad you like this content and thank you for your valuable feedback. All the best with your build too! 😉
@gummybear20312
Жыл бұрын
I still can’t get mine to work. I can’t get them to light and the l-connect 3 does not have them in there
@KleoYan
Жыл бұрын
Hi Alexis Vellis, welcome to my channel, I like to check with strimer plus are you using. Does your strimer plus controller has a USB cable to connect from the controller to your motherboard USB 2.0 socket?
@souravswagat
Жыл бұрын
Can you connect the lian li lancool ii-2x side diffused rgb led strip to this ?
@KleoYan
Жыл бұрын
Hello Swagat Sourav Majhee, welcome to my channel. nope you can't do that with this V2 controller. it's only meant for the strimer plus v1 or v2 strips.
@DrMephisto23
2 жыл бұрын
Hiii great video! Question.. I have the 3x8 Strimer v2 gpu cable and 24pin strimer v1 cable Can I use them both on this controller and control both with my motherboard etc? Also why is this separate accessory available? Wouldn’t it be better for me just to get the v2 24pin cable that comes with the controller? What’s the difference between this accessory and the original v2 controller that comes with the 24pin v2?
@KleoYan
2 жыл бұрын
Hi DrWisPlayer1, welcome to my channel. You see, this video is to illustrate the old strimer plus V1 can be controlled with the V2 controller. If you are getting the Strimer Plus V2, yes the controller is inside and yes you can plug both 24pin and the tripple 8pin to this controller. you can refer to this video kzitem.info/news/bejne/1o2EwINogYiYq3o (Stimer Plus V2)
@maicaofz5609
10 ай бұрын
My streamer plus does not appear on L-conect 3, can you help me?
@KleoYan
10 ай бұрын
JH Maicão Fz, welcome to my channel. Just to check, are you using the strimer plus V2 controller and if you did, did the controller shows under device manager > universal serial bus devices?
@tremorflow3614
2 жыл бұрын
Awesome, very well explained video. Love how you point out not to pull plugs out from the cables hehe. I am going to order these, is your NZXT USB hub easy to find or do you recommend another? I have to get one to make use I think of the strimmer plus v2 as both my motherboard ports are full already.
@KleoYan
2 жыл бұрын
Hello Tremor Flow, welcome back and thanks for the compliment. I am not sure where you are from but here is Singapore is easy to get at shopee shopee.sg/product/1122108/3635361264?smtt=0.213109193-1654614193.9 or Lazada online Check out NZXT Internal USB Hub / Port Expansion (Gen 3)!$29.00 only!Get it on Lazada now! s.lazada.sg/s.07pDo as for amazon, search for nzxt internal hub 3.0
@rkashsggeggr6285
Жыл бұрын
My l connect 3 app does not show the preview in the app I have to guess what it’s going to look like. How do I fix this. I also do not have all these effects and I have the v2 plus
@KleoYan
Жыл бұрын
Hi Rashs Ggeggr, welcome to my channel. Do you get to see the strimer plus V2 controller in your windows Device Manager, under Universal Serial Bus Devices? Also is your firmware for your V2 controller up-to-date? maybe watch this and follow the basic troubleshooting steps. Do allow sometime to watch it and do not hurry. kzitem.info/news/bejne/pJ2s24l8npiXa4o
@fudgewaffle4742
2 жыл бұрын
Don’t know how many of y’all have this “problem” but my lian li l connect 3 box show up in task bar as ejectable media? It kinda annoying
@KleoYan
2 жыл бұрын
Hello Fugewaffle, welcome back. I have not enounter the way you are facing. would you like to try to remove the app and to re-install the app using revo uninstaller? If you have not update the L-Connect 3 application. you might want to upgrade it as well.
@zarihanraduan
2 жыл бұрын
HELLO CAN I ASK YOU.. IF IAM USING STRIMER PLUS 2ND GEN.. AND JUST BUY ADAPTORE CONTROLLER AND CABLE V2 ITS WORK ?? :)
@KleoYan
2 жыл бұрын
Hello Zarihan Raduan, welcome to my channel. I assume you are using the older strimer plus known as v1. If you buy the v2 controller, yes your v1 strimer plus strips will work using a v2 strimer plus controller
@zarihanraduan
2 жыл бұрын
@@KleoYan whoaaa nice nice..tq explain sir 🥰🥰
@KleoYan
2 жыл бұрын
@@zarihanraduan you are most welcome.
@DarkCelestial
2 жыл бұрын
Do you need to plug the usb one because my port got broken
@KleoYan
2 жыл бұрын
Hello LoopInVerse, welcome to my channel you will need to plug the usb cable between the Strimer Plus V2 controller and the motherboard USB header. without this plug, L-connect 3 will not be able to communicate to the V2 controller.
@trentoncrowe8838
9 ай бұрын
So is this for the gpu and motherboard?
@KleoYan
9 ай бұрын
Hi Trenton Crowe, welcome to my channel. Kindly watch this as this content are of old strimer plus. you should get the strimer plus V2 for your motherboard and GPU that is of dual or tripple standard 8pin kzitem.info/news/bejne/1o2EwINogYiYq3osi=959qh6qYofy-W5AW . If your GPU are of RTX 4000 series which make use of the 12VHPWR connectors, get the 24pin Stimer Plus V2 for your motherboiard and this 12VHPWR Stimer plus V2 for your GPU kzitem.info/news/bejne/mJ5-n4idoJOTg5g
@chachinito
Жыл бұрын
Can you use lconnect 3 on strimer plus v1?
@KleoYan
Жыл бұрын
Hi Chachinito, welcome to my channel, yes you can if you purchase the strimer plus v2 controller. The original v1 controller will not work.
@machkick2
2 жыл бұрын
3 videos in 1 week. Thanks a lot!
@KleoYan
2 жыл бұрын
Hi machkick2, welcome back and you are most welcome 👍
@66chargeup99
Жыл бұрын
Does L connect 3 uses a lot of your cpu?
@KleoYan
Жыл бұрын
Hi Choua Vang, welcome to my channel, others I do not know as some reported above 40 to 50 or even more. for me on most of the builds I have done for friends and tested myself. with full set of Lian Li ARGB ego system. it takes max at 5 - 8% max.
@danieldanieldanielUvu
2 жыл бұрын
Want to know something funny?I broke my lianli controller as soon I install it ...need to buy another 🤣
@KleoYan
2 жыл бұрын
Hello DanielKun, welcome to my channel. If it's newly purchased. You can try do a replacement instead of buying another. Try do your warranty claims here lian-li.com/contact-us/
@TimboSlice083
6 ай бұрын
Did they remove Strimer effects? I'm missing a lot of these including bullet stock.
@KleoYan
6 ай бұрын
Hi TimboSlice083, welcome to my channel. This I am not aware of. you might want to ask this question at Lian Li reddit forum www.reddit.com/r/lianli/
@TimboSlice083
6 ай бұрын
@@KleoYan I found the problem. Strimer Plus Lighting->Lighting Effects I had only 1 bar instead of all bars selected. This gives you different effect options. 😅
@KleoYan
6 ай бұрын
@@TimboSlice083 oooo! ok got you. thanks for the update. to be honest, I might do content on alot of lian li's argb devices but personally I don't use them.
@cooljaybz
2 жыл бұрын
hey im in the philippines and was hoping to get a controller, is it available anywhere?
@KleoYan
2 жыл бұрын
Hello Jb Villegas, Selamat pogi, welcome to my channel lol. the only word I know to greet 😂 hmm. They are out a week ago, it will take sometime to reach Asia countries. Most likely you have to wait till end of the month or so. my friends are waiting for it too. As how I got it.. it's provided by Lian Li ....
@Ixionos
11 ай бұрын
Your video was very helpful. I love my Strimer Plus, but my only beef is that the rainbow mode moves so slowly even at 100% speed.
@KleoYan
11 ай бұрын
Hi Ixionos, welcome to my channel. I assume your unit it's working fine and with no delays on changing the effects. If it's due to the speed which you dislike, maybe voice out at Lian Li's reddit forum, they do listen 😉www.reddit.com/r/lianli/
@silviomanuelbaez8360
Жыл бұрын
Hello, is it safe to combine the lian li slfans controller and the strimer controller to connect in the same mobo USB 2.0 header?
@KleoYan
Жыл бұрын
Hello Silvio Manuel Baez, welcome to my channel. It is safe as all your uni fan and strimer plus are drawing power from their respective respective controller. So long those controller are plus with power source (sata connector)
@silviomanuelbaez8360
Жыл бұрын
@@KleoYanYes I got that right from your videos, maybe I was not too specific, I'm sorry. My case is that I have ryujin ii aio, strimers and 6 lian li slfans. That would be 3 USB, since I don't have a splitter, I saw that it is posible to pull the cables from one head and put them all 8 in one header, without the use of a splitter. Do you know if that is safe to do or I should play it safe and buy the splitter?
@silviomanuelbaez8360
Жыл бұрын
@@KleoYan something like this kzitem.info/news/bejne/xneD1qyaj5ilqoI And sorry for posting someone else's video here.
@KleoYan
Жыл бұрын
@@silviomanuelbaez8360 is ok.. no worries. I dont usually stop people from posting links on other videos, only youtube will remove them automatically. now back to your topic. in general yes you can do that but you are stressing the motherboard usb header. I rather you get a powered internal usb hub. here is the example of why I use the NXZT usb internal hub. kzitem.info/news/bejne/pJ2s24l8npiXa4o
@silviomanuelbaez8360
Жыл бұрын
@@KleoYan thanks for your time🙏
@jasabasenara8124
11 ай бұрын
Great video. Many thanks. 👍
@KleoYan
11 ай бұрын
Hi Jasaba senara, welcome to my channel. I am glad you like this content and all the best with your build too.
@moriyokiri3229
Жыл бұрын
Wow, I love the updates on the V2. It's fantastic not having to open up your PC to change the color settings and the new options are excellent. Thanks for the video Kleo!
@KleoYan
Жыл бұрын
HI Moriyokiri, welcome to my channel and thank you for your valuable feedback. by the way there is a new 12VHPRW Strimer Plus V2 which might interest you as these cable extension are for the RTX4000 series GPU kzitem.info/news/bejne/mJ5-n4idoJOTg5g
@moriyokiri3229
Жыл бұрын
@@KleoYan Thanks for the heads up, I just ordered it yesterday!
@KleoYan
Жыл бұрын
@@moriyokiri3229 I see, all the best with your build too. Once again thank you to have visited my channel.
@andreyplatonov228
2 жыл бұрын
Good afternoon. The controller unifan al 120 supports l connect 3?
@KleoYan
2 жыл бұрын
Hello Andrew Platonov, welcome back. Yes is does. If you’re not able to, you will need a firmware update on your SL uni controller.
@andreyplatonov228
2 жыл бұрын
@@KleoYan Thanks for the answer, I'm sorry I was inattentive, the answer was in your other video. While writing the text, the question ripened)))). Can I connect the fan power wire to the motherboard controller, and the RGB cable to the Lian Li Unifan controller, so that LConnect3 controls the light and the Armory Crate fan speed?
@KleoYan
2 жыл бұрын
@@andreyplatonov228 yes you can. Not an issue.
@SuperPaddys
2 жыл бұрын
Hey dude, iam ordered the Triple 8pin V2 and a 24pin v1 strimer, can i use both with the l3 Connect?
@KleoYan
2 жыл бұрын
Hello Peddy Bub, welcome to my channel. Without the v2 controller, you are not able to use the L-Connect 3 app. It will be advisable to purchase the v2 controller.
@Marz7
2 жыл бұрын
@@KleoYan but does this remote work the same on v1 strimer cables?
@KleoYan
2 жыл бұрын
@@Marz7 hello and welcome to my channel, yes it works with v1 strimer plus strips, so long you have the v2 controller.
@kainullvier
2 жыл бұрын
Is the controller available for purchase anywhere?
@KleoYan
2 жыл бұрын
Hi Kai NullVier. The controller will only be release on May 6th, so at the moment, no where to be purchase yet.
@Luigiiiiiiiiiiiiiiiiii
2 жыл бұрын
Thank you this was so helpful
@KleoYan
2 жыл бұрын
Hello FAISAL ADISA, welcome to my channel and am glad it did aid you with some info. All the very best in your build 😉
@VeeTalksStuff
Жыл бұрын
If I've only bought the 3x8 pin cables (no controller included), where do I plug the small black cable into to control it? and can i still control it through the L-Connect 3 software without the controller?
@KleoYan
Жыл бұрын
Hello Vee, welcome to my channel, you can plug directly to your motherboard argb and to use your motherboard to control or you can get the lian li argb cable kit that converts standard 3pin argb plug to a 3pin JST03 plug for you to plug to your uni controller and make sure your uni controller is V2 where it has 2 sata connectors. As strimer plus takes up alot of ampere current.
@gatorninja4782
Жыл бұрын
does the motherboard cable come with the controller hub?
@KleoYan
Жыл бұрын
Hello gator47, welcome to my channel. When you purchase the 24pin strimer plus v2, it comes to with the controller kzitem.info/news/bejne/1o2EwINogYiYq3o
@rowenarrow
Жыл бұрын
Thank you for this. Because of you Lian Li has gotten more money from me, but at least I now know how to work with it.
@KleoYan
Жыл бұрын
Hi Mannie, welcome to my channel. Thank you for your feedback. Now this content is with the engineering sample. If you want to know how the actual controller looks like, you can refer to this video kzitem.info/news/bejne/1o2EwINogYiYq3o
@computergeek3407
2 жыл бұрын
I was going to buy a cheaper brand for my Lian Li Lancool 215 case; but since watching this video I change my mind lol.
@KleoYan
2 жыл бұрын
Hello Computer Geek, welcome to my channel. Do pardon me to have gave you the temptation. Thank you for your feedback and all the very best with your build.
@Zorro408
Жыл бұрын
there is no more drizzling on the strimer v2 cablee ?
@KleoYan
Жыл бұрын
Hi Z408, welcome to my channel. Hmm as I checked mine. It’s still there but it’s of an older version of L-Connect 3. 1.16 that is.
@Zorro408
Жыл бұрын
@@KleoYan hmmm
@KleoYan
Жыл бұрын
@@Zorro408 from lian li official l-connect 3 application download. You can choose to down grade the version if you do not have any issues with the lower version, but the choice is yours.
@hadoukenocx4746
2 жыл бұрын
The polling rate From L-Connect 3 is slow, they need to fast it up. I had a hard time to make a good fan Profile, but now it works fine. I hope they work on the polling rate.😄
@KleoYan
2 жыл бұрын
Hello Hadouken OCX, welcome to my channel. I can't speak on behalf of Lian Li but I do know their backend is working hard to improve the apps and to fix issues we are encountering, guess time will tell. by the way thank you for visiting and all the best with your build.
@heroes952
2 жыл бұрын
Liam li strimmer plus doesn’t show up on my device mananger :c i was using factory settings for a long time on the strummers and i just can’t get them to work
@KleoYan
2 жыл бұрын
Hi, welcome to my channel, you will need a V2 controller, if not you can't controller the strimer plus, be it V1 or V2
@dwightwright6334
Жыл бұрын
i hate that you cant change the colors in bullet stack
@KleoYan
Жыл бұрын
hello dwight wright. welcome to my channel. hmm.. may be post at lian li reddit, they might listen to your suggestions. www.reddit.com/r/lianli/
@dwightwright6334
Жыл бұрын
@@KleoYan ok thank you
@KleoYan
Жыл бұрын
@@dwightwright6334 you are most welcome.
@unknowncomic4107
2 жыл бұрын
This looks tempting but man I spent countless hours trying to get this to work last time until I just happened by pure happenstance to come upon a burried link to a version of the software that worked that was buried in an obscure PDF instruction on the Lian Li site.
@KleoYan
2 жыл бұрын
Hi unknown Comic, welcome to my channel. Yes it can be daunting to look for solution. I don’t deny that, for me I do have my fair share of issues but it’s narrowed down by lian li tech support. Moving forward on all my request build I’ve done. None having the issues. It just work with the l-connect-3 1.2.6
@MineThemed
5 ай бұрын
Maybe the app is broken but I cant change to single strips and I can change the effect only on the MB strip. I am using the official Lian Li USB splitter
@KleoYan
5 ай бұрын
Hi Hinotama Fyreheart, welcome to my channel. just a question. are you using the Strimer Plus V1 or V2, for V1, there is a controller where you do the argb colors on the physical controller. If you are using the Strimer Plus V2, it does come with the controller but you will need to use L-Connect 3 Application to set the colors.
@MineThemed
5 ай бұрын
@@KleoYan Thank you, I am using this application and both Strimers are connected with the same controller that has this switch on the side. Which version I have, I cant tell because its not written on the controller itself.
@MineThemed
5 ай бұрын
@@KleoYan I Got it f ixed but that brings me into another problem. The GPU Streamer now is not filly lighted. The light stops at the last "Sector" of the strip.
@KleoYan
5 ай бұрын
@@MineThemed if you are using the strimer plus V2, the controller where there is a port at the center, thanks for your 24pin PSU else for GPU is at the side where you have the swtich in bettern the two ports. Make sure you plug your GPU to the side and not the center port as the center port does not have enough ampere to provide your GPU strimer plus strips.
@MineThemed
5 ай бұрын
@@KleoYan Oh it worked. It was actually because of the wrong plugged cables. So I switched these two and got what I wanted. Thx again
@kirraa2003
2 жыл бұрын
انت حقا بارع استمر متابعك من العراق
@KleoYan
2 жыл бұрын
Hi K I R R A A, welcome to my channel, I guess you are saying "You are really talented keep up your follower from Iraq" .. thank your for the compliment and to have visit my channel.
@kirikikisses9756
2 жыл бұрын
I can use strimer plus v1 With new Strimer Plus controller?
@KleoYan
2 жыл бұрын
Hello kirkkikisses, welcome to my channel, yes you can use strimer plus v1 with the v2 controller.
@derrickrath4253
2 жыл бұрын
Thank you for the video.... from Australia! I have ordered the nzxt internal usb2.0 hub in prep for my build... having looked at the reviews of previous models... have you had any issues with; the hub burning out/ burnout of internal usb2.0 header of motherboard/ or the motherboard burning out??? 😬😬 Second question; please clarify from previous comments... are you saying using the motherboard argb header, you will get more effects rather than going through the corsair commander/ "uni controller"?
@KleoYan
2 жыл бұрын
Hello Derrick Rath, welcome to my channel. I have yet to experience any burns or melt down but I do have viewers whom I’ve help do face that. Reason is, they are only using a splitter usb hub that does not powered by a sata source. As most of the power drawn is directly from the motherboard usb header and not from the internal usb hub. As for your second question, if you do plug the argb cable between the v2 controller to your motherboard argb header. Yes you get to control the argb effects using your motherboard argb utility app. Personally I will use more effects from the l-connect app, therefore I will not use the argb effects from the motherboard argb utility apps. You see the l-connect app provides more effects.
@kezziekz
2 жыл бұрын
Hi Kleo! You're the bomb! If I get the V2 controller for my 24 pin V1, will I get the same amount of effects as available in 24 pin V2?
@KleoYan
2 жыл бұрын
Hello KEZZIE, welcome to my channel. Be it v1 or v2 strimer plus (24pin or dual/triple 8pin), so long u plug any to the v2 strimer plus controller, you will have all the argb effects from the L-Connect apps.
@salovoley
Жыл бұрын
I recently bought the v2 - question I have the 2x8 cable the controller the button where it is left or right side greetings and thanks
@KleoYan
Жыл бұрын
hi Salomón montanares pinto, welcome to my channel, You dont need to plug to your old controller, just plug your Strimer plus V1 to the V2 controller. Make use of the V2 controller with L-Connect 3
@salovoley
Жыл бұрын
@@KleoYan is strimer plus v2 24 pines and 2x8 gpu anda hub l connect 3
@KleoYan
Жыл бұрын
@@salovoley I hope I am getting your question rigth. You can use your own langauge to ask, I will translate it. Yes both 24pin and 2 x 8pin to be plug into the Hub and use L-Connect 3 to control the argb effects.
@salovoley
Жыл бұрын
@@KleoYan Dear, I bought the lian li trimer plus v2 from aliexpress but the hub comes fon in button in the middle, I don't know if the button goes to the right or left side - that's my question - the other thing connected everything well but in the same way it did not give me rgb light It may be that the controller has failed because I tried connecting the 2x8 cable with the direct cable to the board and it did give rgb light - greetings and thanks - it's the first time I have a lian li
@KleoYan
Жыл бұрын
@@salovoley Hi, for strimer plus v2 strips (24pin) you should have the contoller without buttons, its all connection. If you have the controller with buttons like M1, M2 , S and L then that is Strimer Plus V1. this video might aid you on your controller that has buttons on it kzitem.info/news/bejne/umakz5Oqn5WJZpw
@yomommanigga2501
2 жыл бұрын
Do you know if these will run with the AL-120 fans I was wondering because it uses connect 2
@KleoYan
2 жыл бұрын
Hello Yomomma, welcome to my channel. Yes the L-Connect 3 does work with the SL or AL uni fans. Watch the videos on installation (important) then the explanation of the AL and SL function is this playlist kzitem.info/door/PLEW-b-2vYDdP0Wik6iFBz0QvTrK9bDh2-
@danielg2804
2 жыл бұрын
I love strimers but very low quality 2 of my strips have dead leds stuck on random colors 😞
@KleoYan
2 жыл бұрын
Hi daniel g, welcome back, sorry to head that. Iif your strimers are under warranty, get it replace.
@endlesslord1985
Жыл бұрын
Anyone had a problem with the controller box making there system crash. When I hooked up mine. my system would boot load windows then the system would just shut down. Then I removed the controller box my system then was fine.
@KleoYan
Жыл бұрын
Hi endlessloard1985, welcome to my channel. maybe you can list down your processor, your gpu and your PSU wattage. have you try removing the L-connect 3 app but having the device plug without running L-Connect 3?
@endlesslord1985
Жыл бұрын
@@KleoYan hello it’s a new build it’s a 7700x 4080 ddr5 6000 1000 watt psu asus Thor platinum 2. 980 pro 2tb I have not tried that I just removed it all together
@KleoYan
Жыл бұрын
@@endlesslord1985 I see, are you using the V2 controller with the L-Connect 3 app? If you are, maybe you can try this. uninstall L-Connect 3 app using Revo Unistaller www.revouninstaller.com/ , remove all the residue files and registery. Next turn off your pc, just plug only the V2 controller and boot it up.. see does it crash on you? if it does not, install the L-Connect 3, reboot the system. If it goes well, plug your strimer plus v2 strips.
@endlesslord1985
Жыл бұрын
@@KleoYan I think about it maybe I just go back to the v1 my system would stay on for like a min. And so go black I don’t want to damage my system with it.
@KleoYan
Жыл бұрын
@@endlesslord1985 oh ok.
@neggleston
2 жыл бұрын
Your video helped me solved a problem. Had one of the cables in the wrong slot and could only get either one to work using the button though not at same time. After a quick adjustment success. Do remember watching your video a while back in preparation so was glad to find this video again after buying all my gear.
@KleoYan
2 жыл бұрын
Hi Nicholas Eggleston, welcome back and am glad that your issue was resolved.. thanks for the visit too.
@RaSeL
Жыл бұрын
Can you use the 8+8 pin with the CPU?
@KleoYan
Жыл бұрын
Hello ilRASli, welcome to my channel. sorry, you can't use that.. Strimer plus are only for 24pin and for GPU not for EPS
@RaSeL
Жыл бұрын
@@KleoYan I’ve seen some computers has an LED form the cpu cable that comes from the PSU, or is it another brand or type of LED? And thank you sir for your reply and your review. ❤️
@KleoYan
Жыл бұрын
@@RaSeL hi this am not too sure but it’s definitely not strimer plus as the pin out for the eps 8pin is different from a gpu 8pin.
@alwaysinout
Жыл бұрын
Thanks
@KleoYan
Жыл бұрын
Hello alwaysinout, welcome to my channel and you are most welcome.
@benzneruebes2112
Жыл бұрын
Thanks for guide, it’s helpful
@KleoYan
Жыл бұрын
Hi Benz Neruebes, welcome to my channel and thank you for your feedback. All the very best with your build too 😉
@nordenstadt43
Жыл бұрын
I connected everything like u did but the connector is registerd as SL fan in the L-Connect software any solutions?
@KleoYan
Жыл бұрын
Hi Yanis Brazil, welcome to my channel. I like to ask which Strimer Plus version is that and if possible, can you take a pic of your controller and send it to my email at godzylatech@gmail.com. thank you!
@nordenstadt43
Жыл бұрын
@@KleoYan hey its the strimer plus v2 vor my 3080(double 8-pin) and the lian li strimer L-Connect 3 Controller
@KleoYan
Жыл бұрын
@@nordenstadt43 in your windows device manager, under universal serial bus devices, what does it shows? if it's reflected SL instead of Strimer?
@nordenstadt43
Жыл бұрын
@@KleoYan it says LianLi-UNI FAN-SL-v1.8
@KleoYan
Жыл бұрын
@@nordenstadt43 ok, thanks for the email by the way. besides the strimer plus, do you have SL120 fans too? If you have, that means your Strimer Plus controller is not detected in your system. Try unplug the SL120 controller and to plug your strimer plus controller. see if that shows under the device manager. by the way if you have SL120 fans on radiator, temporary plug the fan load directly to your motherboard fan header. please do this while your system is not on when you do the changes and to double check on the connections before turning it back on.
@deadsec7958
Жыл бұрын
is this the lian li strimer v2 ???
@KleoYan
Жыл бұрын
hello Deadsec, welcome to my channel, these are the strimer plus original using the strimer plus v2 beta controller, which the V2 controller is now out. infact you can use both original Strimer plus and Strimer plus V2 with L-Connect 3 application, so long you are using the V2 controller. Here is another video showing you both original and strimer plus v2 with the V2 controller. kzitem.info/news/bejne/1o2EwINogYiYq3o
@deadsec7958
Жыл бұрын
so i have to buy the v2 controller seperatly. it doesnt come with the lian li strimer v2 cables ?
@KleoYan
Жыл бұрын
@@deadsec7958 If you have gotten the Strimer Plus V2 24 pin strips, it does comes with the V2 controller. If you are having the old Strimer plus (Original or V1) you will need to purchase the V2 controller.
@xxeduxxpr680
2 жыл бұрын
You don’t know how I connect the lían li controller to strimer plus controller
@KleoYan
2 жыл бұрын
Helloo XxEduxX PR, welcome to my channel. If you have a question, kindy provide details and yes I do not know how you connect it. if you have a better way.. why not share it instead of just one random sentence? Thank you!
@xxeduxxpr680
2 жыл бұрын
@@KleoYan sorry bro i forgot put the ?? Lol sorry Im asking you
@KleoYan
2 жыл бұрын
@@xxeduxxpr680 Hi, is ok, I guess you are asking do I know how to plug the Strimer plus controller to the uni controller. there are two ways to do it. Old menthod, using L-Connect or L-Connect 2, with old strimer plus kzitem.info/news/bejne/umakz5Oqn5WJZpw New method, using L-Connect 3 with new Strimer Plus V2 kzitem.info/news/bejne/pJ2s24l8npiXa4o
@xxeduxxpr680
2 жыл бұрын
@@KleoYan thanks yeah i buy the Nzxt usb today i just waiting for that , thanks a lot have a great day and keep doing videos
@KleoYan
2 жыл бұрын
@@xxeduxxpr680 you are most welcome and all the best with your build.
@ivanyu3930
10 ай бұрын
Need some help. I first bought a set of Lian Li Strimer Plus V2 for the 24 pin connector with the L3-Connect controller included. Everything worked flawlessly. I then went to get the 2 x 8 pin strimer plus for my GPU a month later. I plugged everything in correctly but my GPU was not able to boot and I had to press the connectors firmly together again in order to get a boot. It happened again for the second cold boot after I moved the cables a little as it was a little out of place and I had to open my case and do the same thing to get it to boot. As a result, it causes my hard drive to initial automatic repair upon a successful boot. Reminds me of my old rig when it often failed to boot after a bump and I had to press the connectors into the mobo and gpu hard to get a successful boot. Is it a problem with the Lian Li extension cables? The PC booted fine without the 2 x 8 pin extension plugged in.
@KleoYan
10 ай бұрын
Hi Ivan Yu, welcome to my channel. The way you have describe, it will be advisable to have them replace. File an RMA with Lian Li at lian-li.com/contact-us/
@ivanyu3930
10 ай бұрын
@@KleoYan Thanks for your reply! Since my GPU only requires a single 8 pin connector, I shall try changing the order to see if it gets rid of the problem. I posted this question on a forum and one of them replied that it could be due to insufficient power drawn to my GPU through the strimer.
@KleoYan
10 ай бұрын
@@ivanyu3930 which graphic card are you using? it can't be insufficient, you see when you connect direct from PSU to your GPU. it works. Strimer plus v2 are just extension cables, whatever you've plug from the PSU to it. it will carry the current.
@ivanyu3930
10 ай бұрын
@@KleoYan Gigabyte AERO OC RTX 4060. Could be loose contact from the strimer. If I do not touch the strimer cable, it will boot without problems. If I touch it, I will need to push the connections in again firmly otherwise it will beep 3 times and not boot. Will probably RMA it at their office when I have the time. By the way, do you know where I can get more cable combs for the strimer? 2 combs seem insufficient for the 8 pin cable. The two parts are loose in the middle as I am connecting it vertically. Thanks for the reply!
@KleoYan
10 ай бұрын
@@ivanyu3930 when you RMA your Strimer Plus V2, you can ask if you can have somemore cable combs, as what I know they dont sell them separately. At the meantime, dont use the strimer plus V2. dont' seems safe to use.
@Marz7
2 жыл бұрын
its so niceeee. just ordered mine. great video.
@KleoYan
2 жыл бұрын
Hi Marz, welcome back and thank you for the compliment. All the best with your build too 😉
@onairda6587
2 жыл бұрын
Sir question do I need to use v1 controller also , I have the v2 Controller but when I go to L3 Connect Software it cannot detect the Strimmer Plus Lightning .. do you have video how to connect the v1 to v2 controller ? please i need your help ...
@KleoYan
2 жыл бұрын
Hello Onairda, welcome to my channel, nope you do not need the v1 controller. All is needed is the v2 controller, connect the usb cable better the v2 controller to your motherboard usb header and make sure you plug the sata cable to your psu sata. Then at device manager, check under universal serial devices. See if it detects your v2. Controller. Then install the L-Connect 3 app.
@onairda6587
2 жыл бұрын
@@KleoYan Follow up question do i need to connect the two cables like the argb and the usb 2.0 .. because i only connect the usb 2.0 in MB .. thanks for your help really appreciated your response ..
@KleoYan
2 жыл бұрын
@@onairda6587 nope you do not need to connect the argb cable from your V2 controller to the motherboard argb. unless you want to use the motherboard argb app to do the effects.
@danyrodrigues696
2 жыл бұрын
Hi friend, question! is this controller the same as the L-CONNECT 3 controller? (sorry if it's a silly question)
@KleoYan
2 жыл бұрын
Hello Dany Martin, welcome to my channel, yes, the strimer plus v2 controller is meant to be used with the L-Connect 3.
@danyrodrigues696
2 жыл бұрын
L-Connect 3 as in the software? Or is strimer plus v2 and l-connect 3 the same thing ^.^@@KleoYan
@KleoYan
2 жыл бұрын
@@danyrodrigues696 l-connect 3 is the application. Strimer plus v2 controller is the hardware that make use of the l-connect 3 application.
@Ty-vm4di
9 ай бұрын
To my strimer is not detected by the L-connect 3 why ?
@KleoYan
9 ай бұрын
Hi Planetarium, welcome to my channel, which strimer plus version did you get? does it have a controller that connects to the USB 2.0 header of your motherboard?
@Ty-vm4di
9 ай бұрын
@@KleoYan No bro it doesn’t have a controller it came alone
@Ty-vm4di
9 ай бұрын
@@KleoYan It’s v2 triple 8 pin version for GPU
@KleoYan
9 ай бұрын
@@Ty-vm4di if you only gotten the GPU strimer plus v2. You will need the purchase the controller. Without the controller, you can’t use L-Connect 3 application.
@Ty-vm4di
9 ай бұрын
@@KleoYan oh i see, thank u so much man i appreciate it
@desmondrice8373
Жыл бұрын
Hey Kleo, I cant find an answer to this anywhere was hoping you might know. How to save custom profiles in l connect 3 for the v2 strimer? By using the export import option I am able to save the format of each of the 6 lanes. But if I had changed the positioning/colour/timing of an effect before exporting then it will reset to its default when I import it. For example the rainbow effect with each lane delayed one step behind the next to create an angled colour is what I am trying to achieve but importing the export resets all the positioned lanes, the brightness and direction remain.
@KleoYan
Жыл бұрын
Hello Desmond Rice, welcome back, right after you have commented on this. I had a go to test things out. my result is the same as yours. it seems not staying to the profile which suppose to stay. let me highlight this to lian li and see if there is a fix for this. Thank you for the feedback.
@desmondrice8373
Жыл бұрын
@@KleoYan Cool if they could tell us watsup would be amazing, thanks! I poked around so much in L-connect trying to get all my led's synced but right now I'm trying to find a fan control program that can use gpu temps for fan speeds which doesn't conflict with a-rgb software because the corsair icue crashes X670e boards. Argus Monitor is a good fan control for gpu temps but conflicts with Signal RGB which I have been using for my corsair fan RGB.
@KleoYan
Жыл бұрын
@@desmondrice8373 most welcome, I will let you know once I got an answer or if they are going to fix this issue.
@texdoc89
Жыл бұрын
I wish I had seen this video before doing my build today, I have a 2x8 and 1x6 pin on my Radeon Sapphire Nitro 6950XT OC, was pissed one of the cables didn't light. So would I have to get a second box so that they all light up? I guess that's why some of my cables aren't lighting up right now. Ordered the new controller and should be here tomorrow, I still do have another backup 8 pin cable that I ordered as a backup in case it's the cables. As all but the first two rgb strips light up on the first 8 pin connector.
@KleoYan
Жыл бұрын
Hi Bearded One1210, so sorry to hear that, at least you have some clue what's going on. wish you all the best with your build and do let us know how it goes. Once again thank you for your visit and to have leave your valuable comment or experience.
@texdoc89
Жыл бұрын
@@KleoYan it's so weird that as soon as you get these you basically have to buy a new controller lol. Least they look amazing.
@KleoYan
Жыл бұрын
@@texdoc89 hmm.. yours is the V1 Strimer plus right? it should have a controller but the V1 controller does not work with L-Connect 3 application. as for the V2 Strimer Plus Controller alone. it allows you to connect your V1 Strimer Plus to make use of the L-Connect 3 app to control the effects. you might want to watch this too. kzitem.info/news/bejne/1o2EwINogYiYq3o
@texdoc89
Жыл бұрын
@@KleoYan That would explain why it recognizes the fans are installed and not the strimmer since my fans are lian li also... but can't alter the rgb for any of them minus using the old controller on the strimmer.
@KleoYan
Жыл бұрын
@@texdoc89 yup correct. You need the v2 controller to communicate with the l-connect 3 application to use the argb effects.
@Zorro408
Жыл бұрын
cant see strimer pluis lighting in l3 connect
@KleoYan
Жыл бұрын
Hello Z408, welcome to my channel, maybe you want to check to see, after you've plug the V2 strimer plus controller, does it reflect in windows device manager? it's under universal serial bus devices.
@Zorro408
Жыл бұрын
@@KleoYan no i dont saw it in windows manager
@Zorro408
Жыл бұрын
So did i plug into the wrong place in my mainboardb?
@KleoYan
Жыл бұрын
@@Zorro408 if you have plug to the usb 2.0 header then it could be your chipset driver and such. I would advise you to take your time to go through this video and kindly do not rush it. Take your time to digest what I got to say and fully understand what’s going on Lian Li ARGB Products (How to make it work?) [L-Connect 3] kzitem.info/news/bejne/pJ2s24l8npiXa4o
@Zorro408
Жыл бұрын
@@KleoYan thank you
@harlech2
Жыл бұрын
Great video!!
@KleoYan
Жыл бұрын
Hello Nick Mullins, welcome to my channel and thank you for your feedback.
@NaveenKumar-go7wm
2 жыл бұрын
Best Content in the World 😎
@KleoYan
2 жыл бұрын
Hi Naveen Kumar, welcome to my channel, thank you for the compliment.
@NaveenKumar-go7wm
2 жыл бұрын
@@KleoYan Same make one video deepcool Lighting effects
@KleoYan
2 жыл бұрын
By the way there are more in these playlist which you might be interested kzitem.info/door/PLEW-b-2vYDdP0Wik6iFBz0QvTrK9bDh2- or Overall about Lian Li's argb products kzitem.info/door/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm
@NaveenKumar-go7wm
2 жыл бұрын
Like Deepcool Metrexx 70 3F ARGB Fans Cabinet 😎
@KleoYan
2 жыл бұрын
@@NaveenKumar-go7wm nice. gald you enjoyed it.
@nicomilord
2 жыл бұрын
Is it included in the 24pin v2?
@KleoYan
2 жыл бұрын
Hello Nico Tranjano, welcome to my channel. The controller comes with the 24pin V2 strimer plus. You might want to watch this. The actual product kzitem.info/news/bejne/1o2EwINogYiYq3o
@nicomilord
2 жыл бұрын
@@KleoYan thank you. Will watch
@KleoYan
2 жыл бұрын
@@nicomilord you are most welcome and all the best with your build.
@A.Sostan
2 жыл бұрын
Another goood video. Can’t wait for the controller to be available
@KleoYan
2 жыл бұрын
Hello Allen, welcome to my channel, yup, I can't wait either to get my actual sample of the final product either. thank you got visiting and all the best with your build.
@puddleduckist
2 жыл бұрын
New egg has the strimers and controller. Just purchase the triple 8 and 24 pin v2. Very fast shipping 2 days.
@KleoYan
2 жыл бұрын
@@puddleduckist nice. Do let me know what’s your experience with it when you have fixed it to your system. 😬
Пікірлер: 242