Good video, not only useful for DMX cable testing but the actual footage had perfect angle, clarity and time..
@abecoulter18
10 жыл бұрын
YOU SAVED MY TIME I TEST ALL CABLES AND FIXTURES BEFORE EVERY SHOW BIG THANKS BRO IVE MADE ONE FOR DMX MALE AND FEMALE
@freshgino
Жыл бұрын
Dude great video! I know its old but still awesome
@TheTechGuy500
10 жыл бұрын
Made it today and it works great! Thanks Joe :)
@rlg222
6 жыл бұрын
Ha! I never thought to make one of those! Thanks!
@WillPidsley
11 жыл бұрын
god your good! Well done Joe great vid. I`m there now with dmxing, but the cable issues can complicate things and why does it always happen when your running short on time!
@valeriodemelo
2 ай бұрын
Hi joe, i tried doing this using a 120 ohms as i could not get a 110 ohms resistor, but it didn't work. We use an input voltage of 220 - 230 AC here, does that mean i should be using a different rating resistor. Plz advice. Thanks.
@WeddingDJBusiness
11 жыл бұрын
That was awesome very simple, nicely explained and demo.
@DJHINDZY
11 жыл бұрын
Yes!
@aftashok1
11 жыл бұрын
very cool joe, thanks for sharing!!
@pepijnober888
9 жыл бұрын
its better to use a 2 colour LED, cathode to 1 (with a risistor*), and the 2 anodes to pin 2 and 3, this way you test all the signal wires instead of just 2 and 3, it is allso more fail prove.... *find out what is the right risistor there a a real simple formula: 120 Ohm minus risistance of the LED equals the resistance of the risistor (this is different for all type of leds)
@fabiorossi5407
2 жыл бұрын
Hi, for XLR DMX terminal without led, is favorite the 120 or 110 ohm resistor ? Thanks
@DJGSoundsUK
11 жыл бұрын
Great Video Joe. Very interesting! :)
@Time4Technology
9 жыл бұрын
Can I use this as a terminator? So basically 2-in-1? Because basically it's just a terminator with a LED in it, isn't it?
@Time4Technology
9 жыл бұрын
***** thanks :)
@nevilletimothy
11 жыл бұрын
Great video! Thanks, what size of LED do you recommend? 3, 5 or 10mm?
@paulvenkman
9 жыл бұрын
***** So you used 110 ohms resistor to test a DMX XLR Cable. If I wanted to make one for a Mic Cable, what would I need? 80 ohms or is that not the way it works?
@stellanclancy1450
10 жыл бұрын
hello.. i would like to ask the configuration for the LED if you have an idea regarding the play and lightings? thanks
@bizzyb53
11 жыл бұрын
Great Video.
@FinleysTk
11 жыл бұрын
Great vid as always!
@SWATPhantom
10 жыл бұрын
Hey, often times I install a lot of LED bars for weddings and partys and sometimes I plug a cable and all the led bars starts to do random patterns and colors. The problem was the cable but if I plug this tester in that cable, what will it do?
@MisterWestbam
9 жыл бұрын
This is soo cool and easy, I need to do it, thanks :)
@DJSanTec
11 жыл бұрын
cause of the resistor it does the job of a terminator to right ?
@jonniji
3 жыл бұрын
That was my question as well. Isn't this set up a 'Terminator Plug' because of the resistor?
@thorstenlanting9493
7 жыл бұрын
Can i use it also as a microphone signal tester ?
@Maxsdiscos
11 жыл бұрын
What job does the resistor have?
@simonphillips2818
8 жыл бұрын
Hi Joel. I'm setting up a dmx system using QLC software on a Raspberry pie. I've bought a basic dmx capable rgb lamp but I'm unable to control the lamp. The problem maybe the DMX interface for the RasPi. My question is if there is a voltage in the DMX output are we to assume that data is also present?
@bearb1asting
6 жыл бұрын
Simon Phillips im guessing you already resolved this?
@cartofgiant
4 жыл бұрын
Will this work with an audio signal
@vinodkumarkamrak
8 жыл бұрын
very usefull tips
@santerisimonen9050
11 жыл бұрын
Great!
@DJGLTD
11 жыл бұрын
would this work with xlr cables
@domenicodecicco4502
3 жыл бұрын
mi pui dire il valore della resistenza ?
@mazatlacityno1
10 жыл бұрын
Resistance value
@samworthy9850
11 жыл бұрын
Brill really useful, still pin 2&3 for a 5pin dmx plug?
@callumgigliotti5391
5 жыл бұрын
yes
@mariapiaaito1431
3 жыл бұрын
ciao vorrei sapere il valore della resistenza in om per fare un connettore
@MrLukazz97
10 жыл бұрын
Can i do it without resistor?
@emeralddragon2010
7 жыл бұрын
you can DO anything you want, but id not recommend it:)
Пікірлер: 39