I have been working on a bigger project these weeks that is very difficult to get right, I hope to still get to finish it in the way I want to, but it will probably take a while. At the same time I don't want to upload too little so I will take on some shorter and more established syntheses inbetween. For now, enjoy this potassium prison. Also, ideas are welcome 🙂
@razielstratton
9 ай бұрын
Bro, you do amazing work. Do as you need brotha.
@rpfpaleofan6256
9 ай бұрын
Salvarsane, the first antisyphilitic medication. I know you've already had experience with arsenic and it is not as horrible as it is expected to be, just as cyanide (don't eat=everything ok)
@Tyresio12
9 ай бұрын
Could your cryptand solubilize KMnO4 into some non polar solvent, like toluene or DCM? It'd be a nice test/presentation of your product.
@rpfpaleofan6256
9 ай бұрын
@@Tyresio12 crown ester 18-6 is way cheaper and is capable of dissolving KMn04 in non polar solvent, cryptand is more of a scientific curiousity subject (for making Na anions or other obscure stuff)
@esquizofreniasobrenatural
9 ай бұрын
Bro, make a pure negative charged liquid by imprisonment of potassium
9 ай бұрын
A little trick that I like to use for hydrogenations like this is opening both valves, letting some hydrogen escape until you hear a change in pitch of the whistling. At that point you know its basically pure hydrogen coming through and all other gases have been purged.
@TheExpertMathWithAnolog
3 ай бұрын
is this ready for combustion
@cvspvr
8 ай бұрын
chemiolis is such a chad that he doesn't care about his reaction going yellow
@davidshelly9142
9 ай бұрын
Someone in my lab was using sodium azide for a synthesis, and the procedure he was following called for DCM as the solvent. He didn't tell me at the time and put the residual azide and DCM waste into a labelled P-listed waste container. A few months later, I find this container in the back of his hood... that was a fun call to EHS.
@ghgodsexposed
9 ай бұрын
I love the detailed mechanisms and diagrams (like the Pd/C one)! A lot of organic chemistry youtubers will show reaction schemes but not really show mechanisms. It really helps make your content more approachable to someone who isn't super well versed in organic synthesis.
@hoggif
9 ай бұрын
Waste disposal methods are always interesting to see. Especially when there are risks with storing it. As always, there is no one "right" way to deal with it and sometimes seeing something I might do is educational. Oh, and thanks for another interesting video!
@spiderdude2099
9 ай бұрын
I worked in a research lab for 3-4 years designing and handling PEG ethers. I see those Tosyl and Trityl derivatives in my nightmares. We made some azide derivatives too but the carbon to nitrogen ratio was well over 3
@daniellassander
9 ай бұрын
I have been waiting for another of your videos for a long time it seems, thank you so much for making this one sir! I understand that things takes time and i am looking forward to your other projects no matter how they go really.
@damngood8476
9 ай бұрын
Looking at THIS synthesis explains why it is so expensive
@dasbuj
9 ай бұрын
We love supramolecular chemistry
@hkillorean6254
9 ай бұрын
I love that I actually understand the formulas and naming patterns since my organic chemistry class has started and Im genuinely very interested in it
@bariumselenided5152
9 ай бұрын
I found this channel when I started org 2 and oh my lord was it helpful to have something fun to actually use what I was learning on
@erich.5326
9 ай бұрын
"This chemical shouldn't be handled with more than 5g" "So anyway we made 20 g of the stuff"
@kid_missive
9 ай бұрын
You have to be not fucking around as a chemist to have teflon stir bars permenantly stained that shade of brown, I think.
@thesunexpress
9 ай бұрын
Short. Path. Vacuum. Distillation.
@badgerservices9665
9 ай бұрын
Its what I always look forward to.
@monika.alt197
9 ай бұрын
I didn’t know about cryptands, interesting to see compounds similar to crown ethers
@monika.alt197
9 ай бұрын
Also interesting too the reagents like TsCl being used for actual chemistry, I’ve only ever seem them in textbooks (tbf im a student so yeah)
@wvvvwv2
9 ай бұрын
@@monika.alt197Right? I think it’s pretty cool that the sulfonyl group of TsCl reacted with the alcohol of triethylene glycol in something akin to a nucleophilic acyl substitution reaction. I didn’t know you could do that with sulfonyl groups but it makes sense now.
@rickysmalldicky2319
9 ай бұрын
this is so awesome, I'm a computational chemist/biologist working on chemosensors and their affinity to their ligands, and am literally working on publishing a paper over a type of Cryptand right now, so seeing this video come out from my favorite chemtuber is so cool.
@ejkozan
9 ай бұрын
Great video Sam! Dry packing column, my beloved
@srremus9781
9 ай бұрын
"No more than 5g" ... "the yield is 20 g" :D
@jogandsp
9 ай бұрын
I work with cryptand every day in the lab. It's fun to see you synthesizing something I work with
@douro20
3 ай бұрын
An explosion at a kilo lab (a lab used for syntheses of chemicals in kilogram amounts for research) in 2008 was believed to be caused by diazidomethane accumulation in a rotavap.
@informalchipmunk5775
9 ай бұрын
Please make a lab tour video 🥺
@karlbergen6826
9 ай бұрын
I used to work for chemical company that produced crown ethers. I mostly made 18-crown-6, dibenzo 18-crown-6 and dicylohexano 18-crown-6, made by hydrogenating dibenzo 18-crown-6. I worked on a pilot plant scale most of the time.
@htomerif
9 ай бұрын
Realistically, I think these are the best chemistry videos on KZitem. You sure do like your chromatography columns though, even if this one wasn't used that way.
@brettmoore3194
9 ай бұрын
When you thought you were beginning to understand, thanks for the presentation
@quinsutton7097
9 ай бұрын
I know near nothing about chemistry, but those big rings made me think of catenanes, and I always wondered what a catenane polymer would be like. Like a molecular chain.
@KakashiBallZ
9 ай бұрын
Your favorite chemist < Jean-Marie Lehn
@joeyw.7131
9 ай бұрын
In my experience with hydrogenation, using a rubber balloon filled with hydrogen is better so you can keep a constant higher pressure of hydrogen on the solution to increase the yield.
@jimmychu7917
9 ай бұрын
So I have a suggestion for a video, I know it's been done but if you're looking to do some stuff with established syntheses: Synthesis of Chromyl Chloride. It's a beautiful and interesting compound and also Hella spooky to handle so that should be fun! As a bonus, like me Nigel loves the stuff so there's a decent chance he'll drop by to say hi and you guys can compare your executions of synthesis. Alternative: Bromine! Anyways, thanks for the cool video, keep up the good work!
@user-xb5qt2qn6i
9 ай бұрын
Too easy
@user-wo8sc2sz9k
9 ай бұрын
Here is a better way: Starting from your starting reagent of triethylene glycol, do an Albright-Goldman oxidation to the dialdehyde using acetic anhydride and DMSO. Purify by distillation to remove the acetic acid byproduct. Do a reductive amination via a modified Leuckart reaction using ammonium formate and 2 extra equivalences of formic acid. Purify by recrystallization as you do. Only a two pot reaction pathway with very minimal byproducts that are super easy to remove, and most reagents should be inexpensive and readily accessible.
@iFloxy
9 ай бұрын
You should have demonstrated how cryptand can solubilize potassium salts in hexanes (ie potassium permanganate). Would've been a cool demo!!
You really have balls to use azides in your lab. As toxic as cyanide, but also explosive, and, worse, a sensitive explosive. Oh god no.
@nerd1000ify
9 ай бұрын
NaN3 isn't too sensitive. But other cations can be a problem.
@camj4631
9 ай бұрын
Tosyl chloride... the smell is just really off to me. Its like something familiar but wrong
@unlockeduk
9 ай бұрын
i read a while ago about people making thins on a molecular scale like a "car" obviously that's a loose definition but anyway my question is would this molecule be any use in that field? if you haven't read about it before its very interesting subject and i read about it years ago they probably improved it a lot more its basically the start of nano tech
@thomasvanwyk
9 ай бұрын
Amazing job well done how are you
@thomasvanwyk
9 ай бұрын
What paper did you use
@jogandsp
9 ай бұрын
If you don't already, you should keep your used Pd/C and similar catalysts to do a recovery video in the future
@dinocoder1281
9 ай бұрын
Wouldnt it be easier to reduce the azide with PPh3 and directly distill off the product?
@dyatlov3466
9 ай бұрын
thanks
@douro20
3 ай бұрын
PEG-3 diazide is actually available for purchase. I wonder how they store it to prevent it from exploding?
@user-uh1wo2qm9k
9 ай бұрын
I'm the student studying organic synthesis on polymers. Could you tell me which program to draw chemical structures on your video I'm a big fan of your videos. 😊
@clarfonthey
9 ай бұрын
Is the imbalance in charge after locking the potassium in jail enough that you can measure? Wondering if you could use this to make a very terrible, but working battery.
@bardiaqasemalizadeh267
9 ай бұрын
Serious question. Why do you use a cotton for filtration instead of filterpaper (or coffepaper)?
@Chemiolis
9 ай бұрын
It’s just faster
@bdnugget
9 ай бұрын
Wow, white tosyl chloride! Mine is always pink lmao
@NebulonRanger
9 ай бұрын
"Sodide (illegal)" Yeah, about right
@barfbot
9 ай бұрын
forbidden crab
@Osmone_Everony
9 ай бұрын
Hi, I've just learned about Tholin, a very interesting stuff which can only be found on other celestial bodies like Pluto (the reddish dust on the surface). Now I wonder if this can be synthesized in a lab. en.wikipedia.org/wiki/Tholin
@merlix6304
9 ай бұрын
What made you choose Pd/C over a Staudinger reaction?
@nielsschmidt5680
9 ай бұрын
I love you
@0pvo0
9 ай бұрын
I hate DMF with a burning passion
@TjallieBrrr
9 ай бұрын
Why?
@0pvo0
9 ай бұрын
@@TjallieBrrr it stinks, hard to remove from your product, makes me infertile, stinks, and was the solvent in a hard reaction during internships. Also it stinks.
@TjallieBrrr
9 ай бұрын
@@0pvo0 damn thats a chemical worth avoiding, did it make you infirtile during an internship!? That sounds super horrible
@0pvo0
9 ай бұрын
@@TjallieBrrr so far I know it didn't, but did I mention the smell?
@kaboom4679
9 ай бұрын
Careful now , or Nile Red will make some .
@procactus9109
9 ай бұрын
If you can pour it down the drain, does that mean you can throw it on your garden ?
@spanishSpaniard
9 ай бұрын
A probably stupid question. Why didn't he react the ditosilate product with amonia to directly have the amine compound? Isn't amonia a sufficiently good nucleofile?
@lucasensoli8717
9 ай бұрын
Maybe using ammonia there's the risk of getting a cyclic product? While with azides it can't happen... I suppose, not sure 😅
@FrenkieWest32
7 ай бұрын
The formed primary amines (product) can react with the tosyl substrate (especially since primary amine is better nucleophile than ammonia) leading to a whole range of oligomeric products of various lengths.
@markomacik334
9 ай бұрын
Nile red one of the biggest chemistry youtubers: PD/C can make hydrogen explode if there's air present, but i don't have any nitrogen to flush the apparatus This random guy: I just putted in nitrogen before hydrogen, i'm not gonna even say why.
@Sniperboy5551
9 ай бұрын
When are you making azidoazide azide? 😁
@Grak70
9 ай бұрын
The largesse of using that much sodium nitrite just to dispose of waste hurts me.
@user-xb5qt2qn6i
8 ай бұрын
It's cheap
@Grak70
8 ай бұрын
@@user-xb5qt2qn6i depends where you are. Can’t buy it in the US as a private person without a business need because some dumbass kid unalived himself with it a couple years ago.
@idonotlikerussia
9 ай бұрын
Cryptand looks like hmtd (slightly more stable hmtd) and picture with cation of potassium hints at a sequel...
@WetDoggo
9 ай бұрын
all this to make a half hazard joke aboutotassium being Na-ughty
@antalserfozo8942
9 ай бұрын
Thanks from hungary
@ironfluoride8764
Ай бұрын
Alkali metal anion when
@JaStulla
9 ай бұрын
Lmao lock the the K.
@levtrot3041
9 ай бұрын
WHY IS THE STIR BAR BLACK??!!
@Chemiolis
9 ай бұрын
Absorbed tar from all the reactions 😻
@levtrot3041
9 ай бұрын
@@ChemiolisI've always thrown them away when they turned black like that and no solvent would wash it off, but i guess that since no solvent would wash it off actually means that it's probably not interfering with the chemistry you're doing
@Chemiolis
9 ай бұрын
@@levtrot3041 I haven't found it to be an issue, though they do get clean if you use them for something harsh like a nitric acid synth. Mostly it's just conc. sulfuric acid reactions/tar that end up making it black/brown
@ChrisContin
9 ай бұрын
The way to mix a gas is to embody it inside a magnetic field. No gas will rest under a liquid in atmosphere very well. H+ in air (forming HNO oxide-group) causing N2 forming underneath is only effective under a slight magnetic field, in the presence of liquid argon (or another stable hydrogen-field reactant). You probably noticed the earth’s magnetic field depending your yield!
Пікірлер: 95