In this video I make a 3d printed 1/3 scale Iron Man Mark 7 complete with flash LED lights! It was a ton of fun to make! I really enjoyed having it as a thing to work on in my spare time and found it to be rather laid back and tranquil.
The model I found on cgtrader and it was created by Did3D. You can find it here:
www.cgtrader.com/3d-print-mod...
There is also a Facebook Support Group dedicated to all DiD3D models and I found it to be VERY helpful anytime I had questions or concerns about how to do something. If you're interested in doing this yourself I highly suggest joining the group.
/ 556503201768588
As I mentioned in the video everything I did was my own process and it did deviate a bit from the instructions provided by DiD3d but mostly because of the paint choices and application. Not all paints work/react the same way so keep that in mind. I spoke to DiD3d about this video and he had some feedback I want to highlight...
He pointed out that I probably didn't need to sand the PLA as much as I did and instead could have relied on the Sandable Filler Primer a bit more and concentrated on sanding that part (this would have drastically cut down the sanding time).
Also in his instructions he mentions to apply a Chrome base under the Red. I used Gold because I had seen "Frankly Built"s youtube video where he showed his trial/error of MANY different painting applications of red. Perhaps because I used Rustoleum paint instead of Tamiya but I agreed in Frank's video that the best look resulted from Red on Gold. Your results may very not all paint is the same :D
TIMESTAMPS:
0:00 Intro
0:22 My Goal
0:58 CGTrader IronMan
1:26 My Process
2:13 3d Printing
3:17 Sanding Sanding & more Sanding
4:25 Painting Application
7:22 Beginning to put it together
8:11 LEDs, Wires & Soldering
11:43 Final Reveal
13:30 Outro
Things I used in this build:
3d Printer
www.amazon.com/Official-Creal...
3d printing PLA
www.amazon.com/dp/B08VNBJ8G4
SANDPAPER
220 grit www.amazon.com/dp/B001AV9C4S?...
600 grit www.amazon.com/dp/B001AVCEWU?...
1000 grit www.amazon.com/dp/B001AVGEA8?...
PAINT (many of these paints you can find much cheaper at an automotive store)
Rustoleum 2-1 filler/sandable primer
www.amazon.com/Rust-Oleum-Aut...
Rustoleum Black Primer
www.amazon.com/Rust-Oleum-249...
Rustoleum Gold
www.amazon.com/Rust-Oleum-771...
www.amazon.com/dp/B078WMH6N6 (this looks exactly the same as the "bright metallic finish" and can be used instead) I used both throughout and saw no difference even when applying them both on the same part.
Rustoleum Silver
www.amazon.com/dp/B000Z8DGXK
Dupli-color Red
www.amazon.com/dp/B000994BUM
Dupli-color Clear Coat 1K
www.amazon.com/dp/B094L5KX4Z
Tamiya X-23 Clear Blue (for tinting the clear pieces)
www.amazon.com/dp/B0099WQA36
ELECTRONICS
Soldering Iron
www.amazon.com/dp/B07S61WT16
Extra Solder
www.amazon.com/gp/product/B08...
Helping Hands
www.amazon.com/gp/product/B07...
Paint/sanding mask
www.amazon.com/dp/B07Y2S71T1
Arduino Nano (I cut off the long prongs)
www.amazon.com/dp/B00NLAMS9C
USB 5v power
www.amazon.com/dp/B071V3DC9R
LED Lightstrip
www.amazon.com/gp/product/B08...
Jumper Wires
www.amazon.com/gp/product/B07...
26 Gauge Wire (7 colors)
www.amazon.com/dp/B08FMDNRMW
27 ohm resistor
www.amazon.com/dp/B07PPT29BX
Heatshrink tubing
www.amazon.com/dp/B01MFA3OFA
OTHER USEFUL THINGS
Mounting Putty
www.amazon.com/dp/B000AN7EW4
Copper Craft Wire .5mm (for Arc Reactor and help running wires)
www.amazon.com/dp/B004CYFHQM
Gorilla Superglue gel
www.amazon.com/dp/B08QR2XRKD
Non-slip Gorilla Pads. (for under base)
www.amazon.com/gp/product/B08...
#marvel #ironman #3dprinting #3dprint #3dprinted #tonystark #did3d
Негізгі бет Ойын-сауық Making a 1/3 scale Iron Man Mark VII - 3d printing model by DiD3D
Пікірлер: 124