Thanks Caleb, looking forward to using my new tooling!
@dylanhealy4473
5 жыл бұрын
I see your using the canning wax in ur comp are u subbing that for the Vaseline that I've seen in recipes? What's the purpose of the comp at the top of the rocket that's not pressed. Sorry if it's a dumb question. Just trying to understand things. Plus I'm very new to this as stated in an earlier comment. I'm trying to gain & grasp as much knowledge as I can from u guys that have been doing this awhile. I spoke to Ned like you'd mentioned & I'm interested in getting some stuff to try & follow along with his fireworking tutorials & don't really know where to begin. It looks like fireworks cookbook is out of the starter kit to follow along. I know u guys sell a lot of stuff do u have a kit too? That'll get me through his 101 classes. Let me know. Thanks for sharing as always
@pyrofrench6369
4 жыл бұрын
the composition no pressed at the top it is for make a salute: at the end at apogee it make a loud bang...
@northeastpyro2185
2 жыл бұрын
I have a question I’ve also bought tons on different tooling from you why did you say you got lucky folding fuse I’ve been doing that for a little while and haven’t had a problem? Should I be drilling fuse holes threw the side instead?
@scaneagle62
5 ай бұрын
The way you smack the funnel and push your rod into mix before press scares me.
@clairegrube67
6 жыл бұрын
Nice press and good Job
@pyrotekmanfred6503
5 жыл бұрын
Hello what is your increment size? Thanks
@woodysrockspyro6436
5 жыл бұрын
1 teaspoon
@pyrotekmanfred6503
5 жыл бұрын
Thanks it is not 3/4 of teaspoon ?
@VideoWhit1
6 жыл бұрын
You pressed 1# at 8000 psi
@DIY0815
6 жыл бұрын
Whistle Tool for 15mm Tubes How much ? Whiste Mix pressed with 7500psi ?
@pyrozmuro
6 жыл бұрын
50€ for 15mm whistle tooling. Send me a PM, i'm from EU.
Could you ask me if rocket launchers do you use mineral oil?
@rayadwahab4743
5 жыл бұрын
The tools are hard to get what else can I use??
@woodysrockspyro6436
5 жыл бұрын
I make and sell them.. For most single kits I can ship anywhere in the world for 40 bucks.
@woodysrockspyro6436
5 жыл бұрын
www.woodysrocks.com
@angeldavid6786
Жыл бұрын
Brooo kiero unos strobe rrocket en cuanto me los puedes vender
@buykuibra2518
Жыл бұрын
@@woodysrockspyro6436 Do you also ship them to Europe?
@woodysrockspyro6436
Жыл бұрын
@@buykuibra2518 yep
@VideoWhit1
6 жыл бұрын
Where's the rocket in air
@manospalyz
3 жыл бұрын
this video kzitem.info/news/bejne/039_12ppcoh5d6w click that and its the same build from in here
@0bjac
4 жыл бұрын
hey isn't whistle mix sensitive?
@atw_demonic819
2 жыл бұрын
Yes
@albe2478
Жыл бұрын
Hhahahahaaa
@johnanderson186
Жыл бұрын
That’s why Vaseline/Mineral oil/or paraffin wax is integrated into the comp. It acts as a lubricant, helps the fuel consolidate, and desensitizes the mix to a not as sensitive state, BUT STILL DEMANDS THE UTMOST RESPECT. No beating/hammering only pressing.
@Visvangmeneer
8 ай бұрын
@@johnanderson186kclo3 and sodium benzoate with parrafin? How much parrafin should i add on 100gr 70/30?
@cuongvocong1991
3 жыл бұрын
give me fuel to make rocket siren
@sinyokentos4204
3 жыл бұрын
Sorry out of topic. Is it safe by pressing al+kclo3/kclo4 flash powder comp like whistle fuel??? Pressing with arbor or something similar machine, not ramming it.
@sinyokentos4204
3 жыл бұрын
@khánh đỗ I'm not. Just want to know
@PyroMax
3 жыл бұрын
I hope I'm not too late, but DO NOT PRESS FLASH POWDER!!!
@jessies1509
Жыл бұрын
@@PyroMax why not?
@ArtificialEquestrian
Жыл бұрын
@@jessies1509 Well, it can be dangerous or risky depending on the nature of the flash composition’s formula. Though, if you know what you’re doing and take all the necessary precautions, flash powder can be pressed safely to achieve a higher density, and thus, higher performance.
Пікірлер: 36