I have been machining stuff for over 40 years and is one of the coolest things I have seen
@BadYossa
Ай бұрын
This is like therapy. Amazing levels of craftsmanship and excellent production quality/values. Very impressive, to say the least.
@PaulsGarageProjects
Ай бұрын
Many thanks for the kind words!
@ChoneyNation
Ай бұрын
There level artistry that goes into mill work like this, also we used these for measuring the depth of scratches and gouges when I was a helicopter mechanic. Now I know how they’re made.
@martinpanev6651
Ай бұрын
awesome work! clickspring is starting to have some competition :)
@marvinpybus4599
Ай бұрын
Best video that I have seen you make. Didn't realize that you can do such excellent work. Impressive build.
@PaulsGarageProjects
Ай бұрын
Many thanks! I'm always trying to improve 👍
@RalfyCustoms
Ай бұрын
Happy days, thanks for sharing Paul, that turned out nice buddy
@PaulsGarageProjects
Ай бұрын
Thank you very much!
@nightnola
Ай бұрын
New to the channel. I appreciate you showing the use of the tool as well as the machining.
@311Bob
Ай бұрын
Great editing! I enjoy watching machining hate watching ever hole drilled,tapped etc. Nice job showing the finished part in use also. subscribed and thumbs up!
@PaulsGarageProjects
Ай бұрын
Thanks Bob, I try to keep it entertaining!
@ProfSimonHolland
Ай бұрын
i always think....could i make that....probably not. nice work
@jimsvideos7201
Ай бұрын
Very well done, the part and the video.
@PaulsGarageProjects
Ай бұрын
Many thanks!
@peterspencer6442
Ай бұрын
beautiful work!
@PaulsGarageProjects
Ай бұрын
Many thanks!
@DonDyarprecision
Ай бұрын
These were used on jig borers and they were in all the catalogs 20yrs ago, then faded away because they only work on jig borers. The reason is conventional milling machine collets or tool holders are not accurate enough to remove and install the device without losing its calibration.
@najroe
Ай бұрын
I have one, it certainly will shorten sone setups And help in adjustment of not only tools but also fixtures and machines (re center tailstock to name one)
@PaulsGarageProjects
Ай бұрын
I haven't had the chance to use it a great deal, but I think with the DRO on my mill, I might be able to measure things like thread pitches and angles. Also, I might be able to work out radii using multiple x/y coordinates.
@najroe
Ай бұрын
@@PaulsGarageProjects yes, it is useful and with that DRO you can reverse engineer things surprisingly well
@PandiyaRajanbpk
Ай бұрын
Can I get details of this
@najroe
Ай бұрын
@@PandiyaRajanbpkyou use it like jeasuring microscope to measure between holes and edgs of things like gear or screw teeth... getting accurate coordinate map in two planes, then you can get third axis by using a dial indicator, those can then be put into CAD software and values possibly with luck minutely tweaked to fit a standard (rare), or you can just put time in trying to match them to standard threads/gear in machinists handbook or similar. this was a whole class when I went through training, not always easy to do when repairing old precision equipment (instrument maker/micro mechanic training decades ago) standards could be used in parts or not at all, even weird mixes, like metric pitch but diameter in inches or reverse, some had just invented a thread to fit specifically that thing, often weird things with random sizes, not always fun to replicate.
@chrisstephens6673
Ай бұрын
I started one of those kits a decade ago, must be getting round to the time to start again. I only stopped because there wasn't a local anodising company to do the necessary, i think I'll just paint it on the inside.
@PaulsGarageProjects
Ай бұрын
Just painted the inside of mine with dark layout blue, which seems to have done the trick 👍
@chrisstephens6673
Ай бұрын
@@PaulsGarageProjects I would still love to anodise it for the protection but if it is a case of being protected or not used, paint wins everyday.😉😉
@paradiselost9946
Ай бұрын
@@chrisstephens6673 anodising is easy. dilute h2so4, a battery and resistor or variable supply... the dye is boiled in afterwards. except black DYE can be the challenge. buy the commercial stuff ;) most colours can be done using cheapo fabric stain and food dye, but blacks tend to be a mixture and only one takes... leaving you with dark blue etc... like ink on wet paper bleeds different colours. once you get the hang of it its sort of hard to stop... ;) some colours are a challenge. theres also "hard anodising" thats a bit harder to get right, requires a freezer....
@stanstevens3783
Ай бұрын
I’m in the same boat, completed the machining but haven’t sorted out the anodising
@chrisstephens6673
Ай бұрын
@@paradiselost9946 thanks for that, I know the principle but rather thought that the hard variety would be a good idea.
@RustyInventions-wz6ir
Ай бұрын
Very interesting. Nice work sir
@PaulsGarageProjects
Ай бұрын
Many thanks Rusty!
@memyselfandeye1234
Ай бұрын
nice ..... you will be up there with Dan Gelbart soon chap .... peace
@adriankohli4870
Ай бұрын
Top Job, Sir 👌
@PaulsGarageProjects
Ай бұрын
Thank you! Cheers!
@UncleKennysPlace
Ай бұрын
Ha, Hemingway also has _centering microscope_ misspelled at the top of their webpage, but done properly in the text.
@PaulsGarageProjects
Ай бұрын
Damn! Where did I write centering? Thought I'd used the British Centring all the way through!
@flyerphil7708
Ай бұрын
Hemingway’s web site spell it correctly in the title, but get it wrong in the text.
@Andrew_Fernie
Ай бұрын
Nice 👍
@PaulsGarageProjects
Ай бұрын
Thanks!
@youwillneverguess
Ай бұрын
Neat.
@TomTheTinkerer
Ай бұрын
Looks great, does the kit include the graticules/prism/objective or are they separate purchases?
@PaulsGarageProjects
Ай бұрын
Thanks! You get all of the required items with the kit 👍
@TomTheTinkerer
Ай бұрын
@@PaulsGarageProjectsthat’s awesome :-) I’ve used the Isoma and another type before, but this looks ideal for an upcoming project!
@muddkipp_1
Ай бұрын
them calipers must worn to the nub, ouch😂
@PaulsGarageProjects
Ай бұрын
Don't worry, it's just a cheap set I use for scribing!
@hynekfuchs1378
Ай бұрын
👍
@user-lm9pu3sq9d
Ай бұрын
where do you get the reticle?
@PaulsGarageProjects
Ай бұрын
The reticle came with the kit, but I believe it was sourced from a UK company called Graticules Optics. Think this is the item www.graticulesoptics.com/products/microscope-eyepiece-reticles/circle-gauges-and-protractors/ne48-concentric-circles-1mm-10mm-crossline-scales A very nice piece of kit!
@PaulSteMarie
Ай бұрын
My ears! Choke up on that boring bar! You'll get a lot less squealing and chatter. Looks like you've got about a 6:1 stickout. Anything over 4:1 with a steel bar is questionable, especially in a #2 universal tool holder.The #41 is more rigid.
@PaulsGarageProjects
Ай бұрын
Many thanks for the tip!
@jobkneppers
Ай бұрын
I am a machinist for 40 years now and I don't understand why you're blueing your part and wreck your calipers for marking distances on your part. All my lathes came with an Y-axis nonius or, better DRO indicator. Touch of, zero the Y and Bob's your uncle. It looks fancy maybe... But the only thing here which get's blue sometimes is me ;-) I own a Swiss centering microscope for years now and I discovered that you have to tune it every time when you mount it; tip. I also discovered, watching this video, mine has a much better image and therefore much easier to set and use. It's a nice project to build but is doesn't approach the quality of a bought Swiss or German optical centering microscope. I know price is an issue here. But first when do you need a centering microscope? This question should be involved in this video I think. For me the only reason is to find the center of a hole in a rotated part in the X-Z or Y-Z plane. What you see through the microscope then is an ellipse. And you're able to find the center with this tool. Start of with looking at a straight edge and tune the position of the center of the microscope by moving the x or the Y axis on your machine (depending on the orientation of the edge you're looking at). When spot on turn the microscope 90 degrees. Adjust the lens so it centers on the same edge. Rinse and repeat. If both 90 degrees apart movements show the same edge at the center of the microscope you're tuned in for measuring the part and find edges and centers. And pretty accurate within 0.01 mm. TRhank you and all the best, Job
@PaulsGarageProjects
Ай бұрын
Many thanks for sharing your insights, Job! The calipers I use for scribing are an inexpensive pair, so I don't mind them getting a bit worn. I do plan on adding a DRO to my lathe in the future, but I still find visual aids helpful to avoid making mistakes. The video doesn't quite capture the quality of the microscope - it looks much better in person. Getting usable footage with my mobile camera was challenging. I wouldn't be surprised if a professional microscope offers better image quality though. As for why I built it, it looked like a fun and interesting project for a hobbyist like myself.
@ghlscitel6714
Ай бұрын
How to ruin a caliper. Well demonstrated.
@PaulsGarageProjects
Ай бұрын
Don't worry, it's just a cheap set I use for scribing!
Пікірлер: 60