Carbon mini sling bow pistol bolts for use with the Punisher RMX and other 3D printed sling bows like the Adderini.
These bolts are much stiffer than the cheap bolts widely available ones.
6.2 mm diameter, customizable length.
Easy to make.
Feed very cleanly through the Punisher RMX magazine.
Punisher RMX 3D printed sling bow pistol here:
• Punisher remix of the ...
Parts:
3D printed fletching and alignment bed
cults3d.com/:1091771
Spine 400 4.2 mm ID carbon arrow shaft
www.ebay.com/itm/184532288263...
Arrow heads for 4.2 mm shaft
www.ebay.com/itm/313683355239...
www.aliexpress.com/item/10050...
4x2 mm carbon connecting tube
www.aliexpress.com/item/10050...
I get a neat cut on the carbon with my band saw by using a thin blade, using a clamped wood block as a length guide/rest, and rolling the carbon shaft against the blade to cut in evenly from the outside.
I use 2 part marine epoxy to glue all parts together, including smearing a very thin coat over the exterior of the shaft and fletching
Final bolt weights 11.4 gram
Негізгі бет Тәжірибелік нұсқаулар және стиль Making Carbon Core Mini Crossbow Bolts
Пікірлер: 11