If you have an older Marantec model M4500 or M4700 garage door operator and you don't have any remotes programmed to the operator then watch this video and we'll show you how to program your first remote into the garage door opener.
Feel free to email us if you have any questions: KZitem@GarageDoorZone.com
*IF YOU ALREADY HAVE A REMOTE PROGRAMMED TO YOUR OPERATOR and you're trying to add more remotes to your operator then don't watch this video. What you need to do is transfer the code from your programmed remote to your additional remote(s). You can watch a different video on how to do that here: • Programming A Marantec...
If you have a radio receiver in your operator that's not 315MHz frequency then you'll need to add a new radio receiver to the operator. To see how to install the Marantec 75424 Radio Receiver watch this video here: • Marantec 75424 Radio R...
If your interested in programming a keypad to your operator then check out this video here: • Marantec M13-631 Wirel...
You can purchase the Marantec 382 Remote here: www.garagedoorzone.com/382-Di...
You'll find the Marantec 75424 Receiver Set here: www.garagedoorzone.com/75424-...
And the Marantec M13-631 Keypad here: www.garagedoorzone.com/M13-63...
Need a 3-prong Programming Connector?: www.garagedoorzone.com/New-Pr...
Негізгі бет Тәжірибелік нұсқаулар және стиль Marantec Opener Remote Program - How to program the 1st remote into models M4500 & M4700 openers
Пікірлер: 68