33:14 SNAP! went the chain! Wouldn't want to be around that when it popped as it looked like it went flying! Hydraulics can exert enough force to snap chains if you're not careful!
@franklinsyfrett4083
5 жыл бұрын
11:09 pretty secure car. Hard body and you guys having a hell of a time getting it apart. Even the motor didnt want to break away
@1320LUV
5 жыл бұрын
Yes it was tough.... I really should have changed the bucket to the 18" in stead of the 3' that on it. It would have more ripping strength. And would have made it easier
@tommymann69
4 жыл бұрын
Thank God you are back
@sovietcomrade7733
3 жыл бұрын
Who would win, 4 rubber silentblocks or a backhoe lol
@tommymann69
4 жыл бұрын
I would of used a torch and sawall . It would been out in less than 60mins.
@demondturner9306
2 жыл бұрын
How is the Bagger?
@brendamiller8140
5 жыл бұрын
I didn't realize how though they are to tear apart I just thought the older ones would be tougher.as they were likely made better. I couldn't see if you were using a backhoe or something bigger. Thank You. 😬😳👍
@michiganoffroadadventures2749
5 жыл бұрын
I like how you piece a car up. I'm used to using the ole gas axe when hauling a car with no title. Trenching bucket would probably help also.
@eagleeyes5638
5 жыл бұрын
Greetings "Happy Father's Day " Bobcat & Badger. B safe, healthy & blessed
@1320LUV
5 жыл бұрын
Thank you!
@sandradunbar339
4 жыл бұрын
Not going near you when I need a haircut
@astevesilver5642
6 жыл бұрын
for me, that would be an awesome job to do in my free time! Nice vid, by the way!
@1320LUV
6 жыл бұрын
A Steve Silver thank you!
@mrMacGoover
5 жыл бұрын
I think you should take half the amount of diesel you went though to tear these apart slowly... and instead sprinkle inside the cabin of the cars and toss a road flare in watch them burn! lots of subscribers would love to see that Jimmy! and then you dont have to worry about separating things that aren't metal...from the things that are. ( ;
@derekstilwell1694
5 жыл бұрын
I don't mind you guys doing other stuff as long as it's a new video
@1320LUV
5 жыл бұрын
Hahaha thank you for the input!
@arnholm1384
5 жыл бұрын
Exactly what my feelings are to my car this morning! 2 frontlights out and you need to be The size of a wasp to change them..don’t have Jimmy’s equipment so think i’ll burn it.
@1320LUV
5 жыл бұрын
Hahahaha 👍
@michiganoffroadadventures2749
5 жыл бұрын
Lmfao
@tommymann69
4 жыл бұрын
Dang this is a old video
@robertgreene8275
4 жыл бұрын
wher badger
@roncassimore7944
5 жыл бұрын
I can't keep putting out new videos Jimmy like watching you and your Sidekick there do they ever get his ride fix the last one I seen with his ride and needed a motor is he back motoring again or is he still driving your old truck
@tysonwalsh8193
5 жыл бұрын
If you guys don’t like what he’s doing don’t watch it it’s that simple move on to something else
@JOHNNYFUTS
5 жыл бұрын
Going medieval
@60EFFIE
5 жыл бұрын
You know they shred scrap cars AFTER you sell them..
@1320LUV
5 жыл бұрын
Yes but they wont take them whole unless you have title. I bought this with bill of sale only so it had to be taken apart one way or another prior to scrap yard. Thank you for watching and commenting
@superflyguy218
4 жыл бұрын
+Frank RangerFrank Scrap yards will give you less than $100-140 per car(not worth it) but if your shred it apart yourself then you can profit more. Fit 5 or more cars scraped worth and get a better scrap weight.
@jondoherty3678
5 жыл бұрын
Why don't you turn the car upside down and strip it would be a lot easier
@ryanadams8777
6 жыл бұрын
"bout it"
@garylangley4502
5 жыл бұрын
It seems that the front bumper and cross member were in the way. The lower part of the engine kept getting hung up on that. Maybe put the bucket between the front bumper and engine then tilt the bucket against the engine to remove that stuff in the very front.
@1320LUV
5 жыл бұрын
Yes it was. The real issue was that I was excited to make video and didn't change the bucket to the 18" wide which rips motor and trans out in just about one swipe and the sheet metal tears alot easier as well. The 3' bucket i was using is way to wide. Thank you for watching and commenting
@garylangley4502
5 жыл бұрын
I don't know much about the prices of various scrap metals right now, but I was looking at the miles of wiring in the Mercedes, and then the wheels along with the engine and trans. Do you think that it is worth your time to separate the various metals when you turn them in for scrap? Also, have you ever sold things such as starters, alternators, a/c compressors to rebuilders? Just curious.
@1320LUV
5 жыл бұрын
@@garylangley4502 yes I sell all the cores ( catalytic converters, starter, alternator etc. ) aluminum wheels as well. My helper cuts all the wiring out of the cars as well
@garylangley4502
5 жыл бұрын
Thanks.
@digbyvideosbrandon5662
4 жыл бұрын
I hope u save the cats off those
@thelyingscotsman7993
5 жыл бұрын
I thought you were just after the motor and transmission lol good video and subbed.
@1320LUV
5 жыл бұрын
That Mercedes was built good. Had a hard time with it. Thank you for watching, commenting and subscribing
@morgansword
5 жыл бұрын
I can think of couple good scenarios like park it in front of high school and say; Please don't drink and drive, or find someone with same said year, color, make, etc... wait till good and dark... roll his out and leave in place of that other car then when daylight has just about hit bang on the poor b**tards door and holler did you see who hit your car??? gotta look serious/LOL Or take it to a anger control class and say: My wife just pis**d me off and so when she got in it I just lost it!!! Again must have serious look on face for it to fly.Could sell to manufacture of said car: I was just checking motor mounts out to see if it was safe for my wife to drive but as you can see, the shocks failed and the lights don't hold focus??? What the Fu**. Fix it, its under warranty.... again must be serious looking.... hay, keep having fun, later brother
@1320LUV
5 жыл бұрын
Hahaha 😂 all good ideas!
@tonystambaugh8369
5 жыл бұрын
You still cars and hide them in the woods to rip apart.good job
@1320LUV
5 жыл бұрын
Lol I may look dumb but I get hand written and signed bill of sale for every vehicle I get without title.
@madmax3864
5 жыл бұрын
Tony Stambaugh hay at lest he dose a good job at it 👍👍👍👍👍👍👍👍👌👌👌👌🤙🤙🤙
@bajahipb5846
5 жыл бұрын
Dumbest engine extraction I ever witnessed. 74 yr. old gearhead. Yes, I have done it.
Пікірлер: 47