All the best Ade. Enjoyed the video including all the loud thoughts, if's and but's, ho ho ho. Cheers Tony
@TrPrecisionMachining
9 ай бұрын
good video Ades
@tomw1372
9 ай бұрын
Merry Christmas to you and your family from south Texas.
@pauldrury9695
9 ай бұрын
Love your strategies as you go along, much as I do!!!! Happy Christmas from Canada Mate! Cheers, Paul
@brianclark2370
9 ай бұрын
Merry Christmas to you and your familiy and a Happy new year
@mperry9025
9 ай бұрын
Thanks Ade
@Stefan_Boerjesson
9 ай бұрын
That's a long video..... Thanks for the design! Modifying it a little, it's straight on.
@drjwrg
9 ай бұрын
Happy Christmas Ade and msny thanks for the video. Just a thought you will also require a cross slide lock that will be on the gib side and the carriage lock will prevent access to it.
@1ginner1
9 ай бұрын
Happy Christmas Ade.
@andrewdolinskiatcarpathian
9 ай бұрын
Merry Christmas Ade. Thank you for all your videos. They are very much appreciated. 👍🎅
@donmittlestaedt1117
9 ай бұрын
Best of the season to you and all. Thanks for the video Ade.
@JourneymanRandy
9 ай бұрын
Hello Ade. Merry Christmas to you too. 🔧⚒️🔩
@pitt6801
9 ай бұрын
Merry Christmas Ade
@yvesdesrosiers2396
9 ай бұрын
Merry Christmas to and yours and a healthy and prosperous New Year!!! Cheers
@paulpipitone8357
9 ай бұрын
Merry Christmas my friend to you and your family
@dhunter7454
9 ай бұрын
Happy New year Ade keep these video coming learning a lot just watching..
@nigelharding9223
9 ай бұрын
Merry Christmas Ade. the yellow Van is coming for you lol😄 from Chester uk
@JAYZWORKSHOP
9 ай бұрын
good Christmas to you.
@brianmichaelhoward9038
9 ай бұрын
Very best wishes for Christmas and happy 2024
@rickymale8203
9 ай бұрын
Great video Ade. I love to hear you working things out. It’s where so many of my projects go wrong🙄. Merry Christmas to you mate👍
@davidstansbury3204
9 ай бұрын
Marry Christmas to you and your family. Thank you so much for all the videos you make, thank you for your time and knowledge. And I hope you have a great new year. Cheers.
@kimber1958
9 ай бұрын
Nice work Adrian thank you for bringing us along
@duncanvowles7100
9 ай бұрын
Happy christmas Ade, great channel always look forward to your video's.
@billofalltrades2633
9 ай бұрын
Merry Christmas to you and your family, and to 5he families on the channel! Be safe . Great video as always.
@nobbysworkshop
9 ай бұрын
Hi Ade. I have a mini lathe which doesn't have that cut-out on the right side of the saddle. It had a carriage lock already installed using a counter sunk allen bolt. Yours obviously does the same job. Well done. Best wishes for Christmas. Cheers Nobby
@stephenperry5849
9 ай бұрын
Merry Christmas Ade. Thanks for all your videos. I hope you have a great 2024!
@auldreekievaper5394
9 ай бұрын
Great video Ade i do like the longer editions 👍 Have a merry Christmas and a happy new year to you and the good lady
@stephenbrown1143
9 ай бұрын
Happy Christmas Ade and thank you for your well produced videos which I find both interesting and inspiring.
@Steviegtr52
9 ай бұрын
Great result Ade. Merry Christmas to you & your family. Steve.
@jamesreed6121
9 ай бұрын
Just another comment! Be sure to place the screw that tightens the T-Nut does not get placed too close to the cross slide gibb adjustments screws. It can be very annoying if that happens. Ask me how I know?
@berniejanssen2863
9 ай бұрын
Merry Christmas to you also. If you watch joe pie's video it will show you how to eliminate the heavy burrs. Make the first cut on the leftside with the bit going to the left and the next cut on the far righr with the bit going right the finish the rest in the middle of the cut. You will not get the heavy burrs on the sides.
@ade63dug
9 ай бұрын
Hi Bernie. yes I watch Joe . never remember until the deed is done. Cheers Ade.
@jamesreed6121
9 ай бұрын
I think you already have a carriage lock. look at the saddle lower left hand corner. On my lathe which looks identical to yours there is a grub screw. If you tighten that grub screw it should lock the carriage. The problem you will have if you use the T-Nut lock type is the under side of the lathe ways will become uneven over time and if you need to use a tail stock it will be a bother. But if you prefer the T=NUT typer of carriage lock more power to you. BTW, love what you're doing to this mini lathe. KOKO!
@kimber1958
9 ай бұрын
Does that grub screw damage the ways ?
@jamesreed6121
9 ай бұрын
I haven't noticed any damage to the top of the v-way.@@kimber1958
@ade63dug
9 ай бұрын
It does have the grub screw as you said. my issue with that is when using it lifts the saddle upwards away from the bed by design . this can cause rigidity issues when parting etc. I suppose there is no correct answer to how to do this but it turned out ok. Cheers Ade.
@ProfSimonHolland
9 ай бұрын
Ade ... did you make your milling vice t nut bed clamps? what stops it sliding? did you do a film about the vice on the mill?
@ade63dug
9 ай бұрын
Hi Simon. yes . I made them when I first got this vice. Here is the link. Cheers ADE. kzitem.info/news/bejne/tGdotJ58qHeVhJg
@brianhamalainen8817
9 ай бұрын
'Appy 'Olidays to you and yours, Ade! Keep on chugging along, At 20:00, is there some sort of magnet or magnetic spot in your vice that's picking up that "spiky stuff"?
@ade63dug
9 ай бұрын
Good spotting . I have not noticed it before . I shall check it out . Cheers Ade.
@chrisstephens6673
9 ай бұрын
Haven't watched this video yet in case you explain but did I see you doing an advert for JCB tools? MC&HNY to you.
@ade63dug
9 ай бұрын
This is part of the day job . Cheers Ade.
@jonsworkshop
9 ай бұрын
Merry Christmas Ade to you and your family. Keep up the good work. Cheers, Jon
Пікірлер: 43