Very handy to watch before installing a Mira shower - Taps4less
@tomsmith8838
4 жыл бұрын
To remove the mixer valve from the wall to access the filters for cleaning is it just a case of isolating the water supply, draining the shower unit, releasing the lower grub screw and pulling the mixer away from the wall? Also would you recommend replacing the o rings that seal onto the copper pipes or just applying silicone grease before reassembly? Thanks, Tom
@mirashowers
4 жыл бұрын
Hi Tom, Sorry for the delayed response. If you haven't already it's probably best you get in touch directly with our customer service team as they will be able to advise accordingly. You can find our contact details on our website.
@ripstainmcripstain905
Жыл бұрын
@@mirashowers Thanks for the usless answer.
@ride4sun
8 жыл бұрын
Wondering if that works also with unicor pex pipes. yes I know they mentioned Copper pipes. Is that a sharkbite which holds the pipes?
@mirashowers
8 жыл бұрын
+ride4sun Yes the agile will work with plastic pipe. It’s a push fit connection used on the pipes.
@designjunki
6 жыл бұрын
Can i ask if its ok to use pex plastic pipe, why is it not mentioned in the video
@pppscooby
8 жыл бұрын
Hi, my shower is now only outputting cold water ( used to be ok) so i suspect filter issue, is removing the body off the pipes easy ?
@mirashowers
8 жыл бұрын
+pppscooby there could be a few causes other than the filter so we would advise contacting our customer service so they diagnose the exact cause. To take off you need to remove the grub screw from underneath and pull the valve from the wall.
@simonstones1918
4 жыл бұрын
Mira Showers hi, I have the same problem with the Agile on a job I’m going. Cold water only. I was going to change the cartridge. Is that an easy job?
@simonstones1918
4 жыл бұрын
pppscooby same problem! How did you solve your cold only issue?
@pppscooby
4 жыл бұрын
Simon Stones cartridge issue, fixed under warranty
@simonstones1918
4 жыл бұрын
pppscooby defo cartridge is it? I’ve ordered one. Was it easy to fit?
@darrendevey9578
7 жыл бұрын
I see there's no sealant used behind the shower!! Is there no way water can find a way through and get to the plaster board..... just ordered the agile and fitting it myself
@mirashowers
7 жыл бұрын
Providing you follow this video and our installation and user guide which will come with the product than water will not get through.
@nasirlatif2209
4 жыл бұрын
My shower won’t turn off we’ve installed a pressure reducing valve as well but the water just won’t turn off any idea what the issue is?
@mirashowers
4 жыл бұрын
Hi Nasir, sorry for the delayed response. Please get in touch with our customer service team. You can find our contact details on the website or visit www.mirashowers.co.uk/contact-us
@ripstainmcripstain905
Жыл бұрын
@@mirashowers You really are a usless pos.
@andystoe9984
Ай бұрын
Crap shower😅 nothing but problems and no replacement
Пікірлер: 21