Thank you so much for this!!!! i used this software many moons ago, you made it easy to explained and had a really friendly vibe to it simple and right to the point thank you so much.
@machinisttodd
2 жыл бұрын
Your very welcome! Glad I could help in some way.
@bsutube1115
3 жыл бұрын
Thanks for posting this. Ive used PCDMIS and Polyworks throughout my career. I've started a new job with this old school CMM and have struggled to figure it out, using the old school manuals. I wish you had probe change angles and probe calibration.
@machinisttodd
3 жыл бұрын
I’m planning on doing a probe calibration soon. Just keep in mind that I’m no CMM expert but rather a machinist that has used this style a lot. I just got tired of re-explaining to new people.
@mh07.konkan
3 жыл бұрын
Thanks for the video.... Please make more videos on mitutoyo cmm From India🙂
@paabi_pjpt162
3 жыл бұрын
Hilo sir....
@paabi_pjpt162
3 жыл бұрын
Can you help me in cmm problem..??
@AnkitKumar-sx3te
3 жыл бұрын
Educational video sir
@ofthecreation416
Жыл бұрын
Thanks you so much sir ❣️❣️
@1993marckoe
2 жыл бұрын
excellent videos, I would like to learn to program in mcosmos but at work the cmm apex is always busy to learn, do you know any program similar to mcosmos? or where can i get it
@machinisttodd
2 жыл бұрын
Not really. That’s why I started the MCOSMOS videos. I couldn’t find anything out there. I’ll get back shortly to making more.
@paabi_pjpt162
3 жыл бұрын
Hilo sir am new learner in cmm can you solve my problem.... please reply 🙏
@freekknapen1868
3 жыл бұрын
Is there a possibilty to remeasure things? Like I have measured a circle and continue the program and it ends up red. Can i like click somewhere like go to that line and remeasure?
@machinisttodd
3 жыл бұрын
In my experience I will just click to measure another circle and then measure the same one again. I’m not an expert at all the software can do. When you click circle and the box pops up where you name it, there may be something in there where it allows a remeasure. I’m no QC expert but rather a machinist that’s used CMM’s a lot.
@00253
3 жыл бұрын
Hey, I have some decent experience with Geopak. No, you can't just click and remeasure a feature like you would on Zeiss. If you're in repeat mode and have a newer version of the software, there's a button (may be hidden) called something like "go to line" which enables you to jump to a line in the program, but you still need to run it till the end.
@davidlennox7459
4 ай бұрын
you can click the bin icon underneath the calculate option and delete untill your back to taking the 1st point
@ZakisHereNow
Ай бұрын
I know this is old but for future curious viewers… If your running the program and notice it red (it’s probably legit but..) you can click the pause button at the top, and then the back button ( |< ) to step back through the program operations to the start of the measurement. Then click play or forward ( >| ) and it will do that element again. You can also go forward step by step. Just be careful when stepping back through alignments or coordinate systems. Sometime it overwrites data but hasn’t reloaded/retaken it from a previous operation.
@shubhamsharma-ux6gn
3 жыл бұрын
Please make a video on the topic of mcosmos calculator used.please explain in detail. I need this on urgent basis.please reply if possible
@ofoghe-binahayat
2 жыл бұрын
Hi dear friend. How can I define the position of the rack to change the probe?
@machinisttodd
2 жыл бұрын
Ours doesn’t have a rack on it. So I’m not sure. I’ll try to dig up some instructions on it.
@ZakisHereNow
Ай бұрын
You’ll have to do the CMM Configuration again and add the type of rack you have. Generally in Part Manager -> Tools -> CMM System Manager.
@RAHULDAS-cr5fl
2 жыл бұрын
Part programming in ccm with drawing how to do
@bobbauvian7700
2 жыл бұрын
and this button here, right here ..........................(10 minutes later),..............is exit.
@hollyrundle3859
3 жыл бұрын
How do I copy and paste a program
@machinisttodd
3 жыл бұрын
Let me work on getting a video together for that. Thanks for asking!
@hollyrundle3859
3 жыл бұрын
@@machinisttodd yes we have two different machines and something that would be helpful and save time with parts that are the same but 1 dimensions is different and to be able to get a program from one to the other
Пікірлер: 26