i wanted to mention how much i appreciate your tutorials, they really help me ive been a machinist for 25 years was recently begged to replace our machine shop inspector 35 years on the same cmm as you .thing is i had 1 month of training before he was retired. no one else in the shop knows anything about cmm.your videos helps me understand how to set myself up.id love to see you make a video showing each method offered to create origin coordinate system a coordinate system a coordinate system
@machinisttodd
2 жыл бұрын
Thank you so much! I’ve gotten really good suggestions for new videos about different things. I’m trying to get to making more. Thanks for everyone being patient!
@bobbauvian7700
2 жыл бұрын
Oh, yesss this is beautiful thank you so much. I been looking for something like this for years. I am not kidding.
@machinisttodd
2 жыл бұрын
Thanks! There’s so many more videos I want to make but I can’t ever find the time. I’ll get them though.
@3073Sean
Жыл бұрын
Thank you for posting these video’s they really help.
@machinisttodd
Жыл бұрын
I finally plan on getting some new ones done in the next few months. Thanks!
@3073Sean
Жыл бұрын
Is it possible to have you do some on GDT and checking roundness?@@machinisttodd
@machinisttodd
Жыл бұрын
@@3073Sean Yes, I’ll add them to my list. Thanks!
@prakashkambali6878
3 жыл бұрын
Your step by step explanation super sir And enjoy it thanks🙏❤
@machinisttodd
2 жыл бұрын
Thank you!
@dalerobinson5273
Жыл бұрын
. . , ya did GOOOD ! 👏 Youre also Right !.,,, Remember the Clearance height ., the menu location ( I forgot where to get it ., )
@zakizaki1197
Жыл бұрын
Thank you so much for your valuable tutorials. I really enjoyed it. Is there a video that explain how to create the cordinates XYZ and origin for a cylindrical piece because all what I have seen are rectangular pieces. Thanks a lot
@machinisttodd
Жыл бұрын
I’ll add that in my list of videos to make. Thanks!
@seun5310
3 жыл бұрын
Good video. Good demonstration. How about auto measurement. Someone has write the program if you want auto measurement.
@instrumentselection1107
2 жыл бұрын
kzitem.info/news/bejne/14Nj35OoqayeoqQ
@GregSpitzer
Жыл бұрын
Do you have videos of dedicated / manual alignment of round parts? Would like to see setting base plane, origin & offset for that.
@machinisttodd
Жыл бұрын
No but that would be a good video to shoot. I’ll put it in the queue. Thanks for the idea!
@randmir8459
2 жыл бұрын
Hello friend, I am from Mexico and it is very difficult for me to find free information in Spanish, but I really understand you. Thank you very much. Also, How can I replace the function of the button "go to"? I'm telling you because my CMM controller is very basic (i thing so). I only have 4 buttons: emergency stop, one white (TS i guess), one red and one green (Measure mode as i rember). i dont care if you don't respond, thanks so much for your work!
@sumlut
2 жыл бұрын
your Model is different with him his CMM too Old, your is same with me. Our CMM is all in one Controller.
@machinisttodd
2 жыл бұрын
Sorry, I’ve seen your style controller but I haven’t used it. You might need to click in the software under “Machine” drop down to find “GOTO”.
@keithh4004
2 жыл бұрын
How would this work if you can’t use a canned alignment? I have a part that needs to be aligned through two threaded holes in the datum face. The steps to align it right now are plane (part face), circle (center c-bore), and a line that is constructed through 2 threaded holes (inspected as cylinders). How would you do this? My goal is a manual alignment and cnc run.
@machinisttodd
2 жыл бұрын
The plane would be the top. You need to establish a line even if it is going through 2 circles. Then you can construct an intersection point for your origin. The method I used was a simplified version. But you need a plane established, then line established, then you can set the origin anywhere. Hope this helps.
@kunetto
3 жыл бұрын
Thank you for your helpful videos. I have a quick question, where can I find a Mcosmos Manual? I'm running V4.3. Thanks
@machinisttodd
2 жыл бұрын
I’ve got one. I’m trying to figure out the best route to save it online.
@cartoonmusic5778
Жыл бұрын
Sir how to measure surface profile tolerance in cmm
@emreteomanerten
Жыл бұрын
please try turkish stubles
@RAHULDAS-cr5fl
Жыл бұрын
How to make origin in cad model
@RAHULDAS-cr5fl
Жыл бұрын
How to work with cad model
@ronalddouglas6423
2 жыл бұрын
If I have the 3D model from solidworks, can that be imported and used to create a program?
@machinisttodd
2 жыл бұрын
MCOSMOS has the ability to measure right from a cad model. You import it in then select the area you want to measure. I’m still learning this ability so I can’t really guide y’all step by step. Someday soon I hope!
@user-kr4ph9ph8s
2 жыл бұрын
After inspecting first part , there are 10 more same parts need be inspected, can I change or edit this program to jump over manual alignment to run dedicated alignment? how to do it simple way?
@machinisttodd
2 жыл бұрын
I’m not sure of an easy way. If you use a fixed setup( vise or locating pins) I would right the program to do the alignment utilizing cnc on. You might could try editing out the alignment steps for next parts. But I don’t know if I would trust that the alignment is correct from part to part.
@user-kr4ph9ph8s
2 жыл бұрын
@@machinisttodd thank you! I will try it.
@hayatiakgul8906
3 жыл бұрын
how to measure circular run out. ı measured but values change same workpiece
@hayatiakgul8906
3 жыл бұрын
ı am using mitutoyo cmm
@pankajchoudhary6616
2 жыл бұрын
Sir pls surface profle measure kashe karte hai model se section
@toktokersrommelitstv9044
2 жыл бұрын
How. To register my program in mcs. Step by step pls
@pankajchoudhary6616
2 жыл бұрын
Sir Measureing in surface profile
@imamulmutaqin1007
3 жыл бұрын
can measure roundness and texture If can how...?
@machinisttodd
3 жыл бұрын
When you measure a circle, the number under the diameter in the results section is the deviation from perfect roundness. I’m not sure about the texture. I usually use a profilometer or surface roughness gage for that.
Пікірлер: 43