What happened to the good old days when you just had a switch near the light controls with 0,1,2,3 to adjust the headlight height.
@ot2nie
2 жыл бұрын
I have to agree with you on that😝
@RJYOUNG396
9 ай бұрын
This worked for me, thanks so much!!! I can see again!
@caskieadam
2 жыл бұрын
Thank you for this, nice and easy to duplicate on my MK7 GTI.
@ot2nie
2 жыл бұрын
Welcome sir😉
@PDXborn
2 ай бұрын
For mk6, it's a bit different. Use code 1 when you go into the basic settings menu. I didn't need to do the second command. It locked itself automatically once the adjustment was done. No lights on the dash and back to stock headlight height after VWR springs/koni yellows on my 2011 gti.
@kharimano
6 күн бұрын
The option for headlight regulation is greyed out and when I click it, it gives me an error, anyone know the fix?
@KillerZero259
2 жыл бұрын
Thank you for the video. I just replaced a broken headlight sensor on my B8.5 S4 (6MT) and I'm hoping this method will get rid of the error light
@frankvanderjagt2441
2 жыл бұрын
Interessant stukje. Metvname het gebruik van de OBD11 mijn auto is niet verlaagd maar als ik t zo zag kun je heel wat af- en instellingen met die OBD11 aanpassen en fooutcodes uitlezen. Ik zal hier ns wat verder naar zoeken. Als ik t goed begrijp heb je daar wel zo'n VW we-connect account voor nodig?
@frankiealvarado4605
21 сағат бұрын
I get an error message when 01539 any help?
@rgdabdalla2239
2 жыл бұрын
Thank you so much you helped me🔥
@tonbatteur
Жыл бұрын
Thanks for sharing 😊 I’ve fix my issue 😉
@binniealiabdullahi8345
4 ай бұрын
So I tried this and after I slide it automatically just says basic setting ended without doing anything
@welder617
4 ай бұрын
My headlight is making a slight buzzing noise only when the low beams and high beams are turned on, Doesnt do it with the DRLs though. Never noticed the sound before, anyway when i slid the basic setting it also ended right away too
@binniealiabdullahi8345
4 ай бұрын
Have you seen any fixed around?
@dvddvd1058
Жыл бұрын
Hello ! Do you know how to show the driving modes in the screen . I dont have the 4 driving mode in my 2015 GTE
@adrianlowe1873
Жыл бұрын
My OBD app is asking for a channel to program the lights. Which channel do they run on?
@erwinvh
2 жыл бұрын
Bedankt voor deze uitleg. Maar ik heb toch nog een vraag. Ik vind dat mijn led koplampen te laag staan. Moet ik dan de koplamp mechanisch afstellen na 'Basisafstelling van de koplampen' in OBDEleven en voor 'Basisafstelling bevestigen'? Of moet ik eerst ook de 'Basisafstelling bevestigen' uitvoeren voor ik ga afstellen? Dat laatste kan ik me eigenlijk niet voorstellen, maar uit de video maak ik dat wel op.
@ot2nie
2 жыл бұрын
Je moet eerst basisafstelling selecteren, dan pas bevestigen en erna mechanisch afstellen. Dan heb je 100% het nulpunt te pakken en opgeslagen. Je mag ook doen: basisafstelling > afstellen > bevestigen, maar dan moet je alles doen zonder de auto uit te zetten. Als je dat wel doet halverwege, loop je kans dat ie zijn basisafstelling ‘vergeet’ en gaat hij terug naar zijn oude nulpunt (erg irritant als je bezig bent met afstellen). Hij slaat alleen het punt op als nieuw nulpunt, zodra je op bevestigen drukt.
@erwinvh
2 жыл бұрын
@@ot2nie Bedankt voor deze supersnelle reactie. De VW-dealer heeft een paar weken geleden voor de APK mijn koplampen lager afgesteld (ze stonden ook echt te hoog toen ik de auto kocht), maar nu vind ik dat ze te laag staan. Op internet lees ik meerdere ervaringen van te laag afgestelde koplampen, dat zouden de VW-normen zijn. Maar wat gebeurt er dan nu als ik zonder OBDeleven aan te sluiten aan de mechanische afstelling zit (met contact en verlichting uit)?
@ot2nie
2 жыл бұрын
@@erwinvh kan zijn dat het goed zit dan, maar als je mechanisch gaat afstellen zonder eerst de basisafstelling te selecteren, loop je kans dat je ze tot ‘hun eind’ moet draaien. Als je dat doet, dan komt de afstelschroef los en moet je je koplamp openmaken om het te fixen (schijnt een enorme klus te zijn). Daarom raad ik altijd iedereen aan het eerst via obd te doen na het verlagen vd auto (dan staat ie weer op zijn meest veilige punt, namelijk precies in het midden). Het laatste restje kan je dan met de hand finetunen.
@andrewszczurko8604
2 жыл бұрын
Just tried this on my 2015 GTI And passenger light is significantly lower than the driver light is there a way to reset it to try again or to do it manually
@PDXborn
2 ай бұрын
Use the manual adjustment under the hood next to the light housing. Be careful you don't go too far. It can ruin the bixexon headlight. You can manually even the headlights if you already did the obd2 port adjustment.
@Smodlee
2 ай бұрын
So ur saying vcds works
@endlesscustomstyling2683
5 ай бұрын
Hi.. Does anyone know how to adjust headlight height using vcds
@AngryJesus
4 ай бұрын
Been looking for this info too. My car is lowered significantly and I'd like to just set the headlight height stationary and leave it there.
@gioironman
2 жыл бұрын
I think you should also re-set radar configuration, you know?
@ot2nie
2 жыл бұрын
Don’t think so, since it doesn’t have height adjustment like the headlight. But i could be wrong.. (I don’t have adaptive CC)
@chrisdeburger1860
Жыл бұрын
Just dropped mine with eubacteria springs and was asked if I wanted this doing for £160.00 - I tried the car without adjustment and the radar works fine - no issues to date
@ixrosshavok
2 жыл бұрын
Still waiting on the dragy results buddy haha
@ot2nie
2 жыл бұрын
New tires on monday😈 for the rest still not better than the times i already posted😭
@BalkanBoyBiH
2 жыл бұрын
@@ot2nie 100 - 200 alsnog 14 sec of heb je dat nog niet getest?
@ot2nie
2 жыл бұрын
@@BalkanBoyBiH yup 14 nog steeds mijn beste tijd
@Lukemk7
2 жыл бұрын
Moet je voor obd11 permaand betalen(abbo) of alleen aanschaf
@ot2nie
2 жыл бұрын
Ik dacht een bedrag per jaar, check hun website anders even, want ze hebben soms goeie deals.
@saeedsubih8619
2 жыл бұрын
Hello, if i have adjusted the headlight by the knobs manually and need to reset them to their original high, obd eleven will do that? Thanks!
@ot2nie
2 жыл бұрын
Well obd eleven can reset the adjustment motors back to their 0 position regardless of the sensor position on the control arm. If you’ve adjusted the knobs, this obdeleven function will reset it either way, but you will keep the discrepancy you made with the knobs (since the computer doesn’t know the actual height, only the calculated height..) What i’d honestly do is try to get the knobs back to how they were (as precisely as possible) and then do this function. The knobs need to be done as the last step, so it’s lowering>reset 0 position>knobs (if necessary). Good luck😀
@ot2nie
2 жыл бұрын
I do have to tell you that even thought the settings might be ‘off’, turning the knobs instead of resetting them the ‘cleaner’ way, it’s still good enough for most people.
@saeedsubih8619
2 жыл бұрын
@@ot2nie thanks a lot for the information!! Because i tried adjusting the right headlight by the knob but nothing really happened, i even adjusted it to the max(up) and nothing happened to the beam high, so trying to reset them by obd11 will be good right?
@ot2nie
2 жыл бұрын
@@saeedsubih8619 yes that’ll work. Be careful with ‘overturning’ the knobs. I once saw a shopdap video where they warned people to not do it, because you can ultimately loosen it until it comes off the thread. Then you’re f*cked.
@saeedsubih8619
2 жыл бұрын
@@ot2nie i should not treat to the knob adjustment because it didn’t work! Right?
@patricksilas6518
2 жыл бұрын
How you lowered the GTE? Springs or Coilovers
@ot2nie
2 жыл бұрын
Springs!
@patricksilas6518
2 жыл бұрын
@@ot2nie nice. guess im going to put some h&r Springs in my gte. How is the Car feeling? Stiff, bouncy?
@onuryaman6269
3 ай бұрын
Hello master mechanic, I enjoy watching your videos from Turkey. The obd11 you showed is a bit expensive compared to my country's money. Would you like to gift this to me? Thank you, see you in many nice videos.
@jeremywallace1843
2 жыл бұрын
Now I get a fault with check right daytime running light. How should I clear that? Lights are at a much better level afyer this adjustment but exclamation point light is on on dash now. Thanks!
@ot2nie
2 жыл бұрын
What is the exact error? If you’ve done these 2 steps correctly, the levelling should be good. Have you ever done something with the screws?
@jeremywallace1843
2 жыл бұрын
@@ot2nie Thanks for the quick response! It reads 'Check Right Daytime Running Light'. I have not touched the screws.
@ot2nie
2 жыл бұрын
@@jeremywallace1843 yes have you read the fault with obd11? It should become clear wether it’s a mechanical or electrical defect😀
@jeremywallace1843
2 жыл бұрын
@@ot2nie let car sit for 20 min. Just restarted and code is gone?? Maybe I should have just waited a bit (hope it doesn't come back). Thanks for your quick response and keep bringing valuable content! Thanks.
@ot2nie
2 жыл бұрын
@@jeremywallace1843 thank you sir, let me know if it returns😉
@ThenameisOskar
2 жыл бұрын
Wanneer GTE st3 vs (rode) Golf 6R video release
@ot2nie
2 жыл бұрын
Ik krijg maandag mijn nieuwe banden, dus wellicht erna een keertje😉
@ThenameisOskar
2 жыл бұрын
@@ot2nie Ik vrees dat banden bij 100 en harder geen verschil gaat maken. 0-100 win je het sowieso niet, ookal heb je 100pk meer dan die rode 6R, of je moet semi slicks ofzo hebben.
@ot2nie
2 жыл бұрын
@@ThenameisOskar waar is die video dan nog voor nodig🧐
@ThenameisOskar
2 жыл бұрын
@@ot2nie Jij hebt ons zitten teasen een tijdje terug 😂
@ot2nie
2 жыл бұрын
@@ThenameisOskar jawel, maar je weet de uitkomst toch al?? Zolang ik nog wielspin met 100 heb, helpen die banden, dus pas erna een video, anders krijg je een vertekend beeld en zit men ook weer te zeiken😂
Пікірлер: 62