Posting this for my own reference 0:42-1:38 - How to secure an overlocked seam using the machine 1:39-2:12 - How to secure an overlocked seam using a darning needle (hand sewing) 2:12-2:19 - Overlapped overlocked seams do not need to be secured any further, therefore, you don't need to do anything 2:20-2:37 - How to undo an overlocked seam 2:52-3:51 - Changing needles 4:09-4:30 - Changing threads 4:31-5:36 - What to do when there is a thread breakage 5:54-6:26 - Converting machine from 4-thread to 3-thread 6:44-7:37 - Converting from 3-thread to 2-thread 7:53-8:55 - How to create a narrow 3-thread rolled hem
@carmenita7583
4 жыл бұрын
Thanks for this overviewed for the multiple functionality of this serger Yuki MO 654 DE . I would like to know more more specifics of the presser feet , the uses when to use the knifes, and the needles positions please. 😷✋🏽🧼🤚🏽🙋🏽
@maureenalexander1987
9 жыл бұрын
Wow! Thanks for this tip! I have only ever used a hook and pulled the end back thru the surging edge! Thanks for the video.
@TheJukihomesewing
9 жыл бұрын
Our pleasure to upload this information. Please look out for more video.
@palmaserlenga1375
8 жыл бұрын
Ma in Italiano non c'è una spiegazione. grazie
@bernadinecabanas331
6 жыл бұрын
This video is precious 😊
@hollyxo.
8 жыл бұрын
Can you please make some videos showing how this model can sew a variety of weights of stretch knit fabrics (seams and rolled hems) while keeping them flat? I need to work on knits primarily...T-shrits type fabric, lycra, and stretch mesh. I will need to make seams and rolled hems. I'd love to see how all that works properly with this model as it is one of the models I'm considering. Thank you!
@paulinedaniels978
2 жыл бұрын
Thank you
@fraukewegener3671
3 жыл бұрын
Ein deutsches Video mit allen Erklärungen wäre sehr schön. A German video with all explanations would be very nice.
@yasminali2689
Жыл бұрын
Hi sweety you can help me i have jurisdiction 644 and issue is my machine top thread holder is broken how I order and machine tention is not good sometimes is the thread too loose sometimes thread broken clues by i give for service but they return to me same its so please tell me where I can take where is juki carter or office so I order parts thanks
@peggybray5450
2 жыл бұрын
How often should you oil your machine
@harplover1
9 жыл бұрын
Going to buy my first serger, and it was baby lock all the way....until I watched a video on threading the Lauren and Diana. I think it looks much harder than this JUKI, plus you have to remove the sole plate to do the rolled hem. This is the machine I now want!! Great videos too! My ONLY concern is that I don't have a JUKI dealer anywhere near me, so I guess I'd have to buy it from Amazon. Then what if it needs to be repaired, and I would miss out on free classes showing me how to use it, and I feel I need that bc I'm new to serging. I'm a little concerned, to buy it online like that. :((
@hollyxo.
8 жыл бұрын
+harplover1 I have the same concerns and have been considering this Juki model too. Did you decide to get one? If so, how is it going?
@duongcam3041
2 жыл бұрын
I am living in France. Could you please tell me where I can buy the optional presser feet (blind stitch, elasticator, cording, piping,...) ????? Many thanks.
@marisapizzinato4984
3 жыл бұрын
Fantastico, peccato che non ci siano i sottotitoli in italiano....
Пікірлер: 18