This IS original packaging. The dome Tweeters and midranges come in a cardboard box with a foam plastic container with some 12 tweeters or maybe 6 or 8 midranges.
@ImpulseAudioSpeakers
5 жыл бұрын
geokrilov thank you for confirming that!
@MajorTendonitis
2 жыл бұрын
I’m really enjoying your videos and the commentary you provide . Your channel should have at least 100 x more subscribers than it has . Your channel is one of the best kept secrets on KZitem . Not a good thing lol
@JurMalafi
6 жыл бұрын
MDM-55's are packed 12 or 16 to a package (maybe even 24?), not individually. It's been 14 years since I ordered my MDM 55s in bulk so I forget exactly. They cut the tray for smaller orders, so you have original packing. Don't worry about the sticker, if you are put gaffers tape or duct tape around the whole can. Have fun, I have an active setup MDM55, MDT-39 and SEAS Excel 18cm. Digmoda DSP and 3886 based amplification. It takes very elite loudspeakers to better this system now almost 12 years old. Still making them for acquaintances who hear my brother's surround system. Great videos!
@ImpulseAudioSpeakers
6 жыл бұрын
Jurmalafi Xo Thanks! I would have thought they would have individual packaging but wasnt sure. Also, I use a dealer account with Solen so thought maybe I didnt quite get the same treatment as a regular customer. In any case I appreciate the clarification. Good to hear the feedback on your positive experience with the Morel too.
@jonhexom8310
6 жыл бұрын
Interesting video, Ryan. Thanks for the upload!
@Toid
6 жыл бұрын
I always wondered about that dome midrange. I kept thinking the same thing you did. At that price, the spec sheet really didn't interest me enough to ever spring for it. Thanks for the review. I look forward to seeing what you think of it when you put it in a final project.
@zoxwolf2133
5 жыл бұрын
You cant miss with Morel drivers. They are almost Dynaudio drivers coz Dynaudio is making some parts for Morel also (dome motors, hexacoils etc) :) Cheers
@asianfighter62
5 жыл бұрын
You using quality drivers and ribbons for high frequencies is impressive regarding your designs.
@zoxwolf2133
5 жыл бұрын
I am surprised you didnt work with Morel before. Morel is by far very simmilar to Dynaudio by characteristic and though they produce drivers in the house i think they still use Dynaudio motor assembly for some high cost drivers. I work mostly with Dynaudio drivers and even if there are "better" drivers out there i am real dynaudio fan :) and dont care for the rest. I am preparing three way closed box project based on Dynaudio 30w54 woffer, D52AF midrange and D28/2 tweeter. Cheers mate
@clemmtec9506
5 жыл бұрын
share with me , I love Dynaudio speakers, I have two 30 w 100 and seas midrange 5 ins and morel mdt 33 tweeter. sound good. clean sound.
@turcinovic90
5 жыл бұрын
yea but that foam surround
@LadStones
4 жыл бұрын
Do you have any idea what the dome fabric on Dynaudio D54AF drivers is made from?
@tarekz9992
6 жыл бұрын
High inductance usually = no copper shorting ring in the motor = higher distortion
@Rheasound
5 жыл бұрын
Morel is one of the best.
@mhp_loudspeakers3768
3 жыл бұрын
Morel ist okay. Tymphany and Scan Speak is Better in my Opinion. I build speakers with the most drivers of them.
@franzb69
6 жыл бұрын
morels are one of the best in car audio in my experience. they're not very well known by most but man do they sound good. they sound sweet.
@romanyaremko8729
4 жыл бұрын
Great review!
@pliedtka
6 жыл бұрын
Hi Ryan, tnx for the video. Dayton RS52 alu dome is another good looking dome mid, but has larger chassis diameter. However, most mid domes suffer from rocking modes and according to some sources they are detectable - ATC mid has special double suspension to prevent it, but $$$😰. MB Quart produced 1.5" titanium long time ago, but Fs was much higher if I memory serves me well - quite OK driver. I have large dip in my car around 550-750Hz, with midbass mounted in lower front part of the doors, hence my interest in some mid domes to do a 3way. Let see how it battles against the Scan - with it's limits of course. Keep us posted👍
@mitsuracer87
5 жыл бұрын
That dip is probably from the reflected wave off the transmission tunnel cancelling out those frequencies. Had the same issue in my car and was thinking about going 3 way or using a full range in place of tweeter. Ended up using a DDRC24 and it fixed the phase issue and now there's no more dip.
@larspedersen1546
Жыл бұрын
Seas a26re4.. Fantastic frequency response and mid range for a "10" woofer..
@gregd6022
6 жыл бұрын
Well it does do something remarkable... transient response, blows away anything in it's price class or even above it. That's a function of using a "dome" structure... same thing in non-reinforced cathedral roofs, strongest form for a given material.
@JosephCrowesDIYSpeakerBuilding
6 жыл бұрын
Great review! Have you considered mounting this in a 2” throat midrange horn?
@konstantinzadornov5042
3 жыл бұрын
I would like to hear a demo recording of the sound of different speakers in the assembled speaker system for comparison
@wcg66
6 жыл бұрын
Another interesting video, thanks. I guess if you go with the Morel driver you can use the Scanspeak in another bookshelf project.
@ImpulseAudioSpeakers
6 жыл бұрын
wcg66 well they were on loan from a friend. I ordered them for his project and he let me try them in case I wanted to order myself a pair. I will use the Morel with a single Motus and the Fountek ribbon. Then I will do an ultimate project with the Viawave ribbons and two Motus woofers. Possibly the scan 15M or try another mid of some kind just for fun.
@odincoulombe706
5 жыл бұрын
I thought the same thing when i saw them.. If you go to madisound.com they have all the morel speakers,,a really nice one is there titanium supreme,,,they are 500 organelle but are on sale now for 344,,it goes from 40 to 4000,,and another one goes from 40 to 12000 hz bad ass speakers.
@altops4490
5 жыл бұрын
wonder if a a cap sim cud be configured to work by dragging your desired curves on the right side, and watch the left schematic populate with crossover parts.... cool idea.
@scottlowell493
5 жыл бұрын
I spent some time with DIY Morel and Audax projects. Audax aerogel wasn't my cup of tea (too soft). The Morel was much better, but not on par with Scan speak, SB acoustics or Seas.
@14TacomaDR
6 жыл бұрын
i have a old set of Braun speakers with a soft dome mid and it was highly rated .they are Ads drivers i notice that yours have a horn loaded design .
@westelaudio943
5 жыл бұрын
I also had Braun speakers from the 70s that had dome mids. I eventually noticed their diaphragm was touching the metal front grill and became stuck to it. The engineer somehow failed to leave enough space between baffle and grill for the midranges. Very crappy speakers if you ask me
@edwardcase
3 жыл бұрын
3 decibels is half power? so 1db is quite a variance?
@ImpulseAudioSpeakers
3 жыл бұрын
Well, audibly it’s not a huge difference, but it can be audible if it’s over a wide range. I wouldn’t worry about 1db most of the time.
@MajorTendonitis
5 жыл бұрын
When I see manufacturers response with dome mids , I notice there not a very flat response compared to conventional cones
@Justiceinabarrel
4 жыл бұрын
bought 2 and one was defective out of the box, found forums with them failing also. These are lottery speakers. What are the chances of having a bad unit really? There is something wrong with them. I am experienced and a comfortable crossover well within range. Returning
@davidevans1420
3 жыл бұрын
Have you ever designed a crossover for the MDM55? Do you design crossovers for others?
@ImpulseAudioSpeakers
3 жыл бұрын
Yes I have. I used a ribbon tweeter and an 8” woofer. Worked super well. Great speaker. But I never built a finished nice pair because I didn’t need them and my renovation had to start. So I sadly disassembled them. I have done some design for others but generally don’t bother. It’s a lot of work and rather design and build speakers that I like at my own pace.
@cncgeneral
5 жыл бұрын
Would be interesting to see if the FS drops once run in
@ImpulseAudioSpeakers
5 жыл бұрын
cncgeneral I always give the drivers some time with a sine wave at a minimum, but that really isn’t all that much break in. For a small dome mid like this in a sealed chamber it’s unlikely to drop much of any. But I’ll check it now that it’s been run for a while.
@josephanselmo6863
6 жыл бұрын
Hello Ryan! Excellent video as usual. Bro I need a help with something I don't understand yet I sure you can explain very well. When I download the FRD archive - let's say for instance The dayton woofer ST210-, It has for types of FRD with a number that is different. For instance: ST210-8@0.frd them, it changees; ST210-8@15.frd, ST210-8@30.FRD and last one is @40.frd. When I load everyone of this to the xsim program, the curve changes affecting the values of the components. What exactly do they mean and what is the right choice? Thanks again Ryan and waiting with anxiety the 3-way video crossover design.
@ImpulseAudioSpeakers
6 жыл бұрын
Joseph Anselmo im pretty sure that 0 15 30 and 40 degrees off axis. Use the 0 curve for your design. That is typically the listening axis. The other curves can be loaded to check that the off axis response is smooth and consistent.
@josephanselmo6863
6 жыл бұрын
UUUUUUUUUUUUUUUNNNNNNN. Thanks bro!
@charlieturner5485
5 жыл бұрын
Have you tested any Morel tweeters? They have intrigued me for some time along with this midrange.
@ImpulseAudioSpeakers
5 жыл бұрын
charlie Turner I haven’t really used many Morel products at all. They all tend to do quite well, but the price matches the performance. So although high performing, value is only middle of the pack. If you like what they offer they will meet your expectations.
@charlieturner5485
5 жыл бұрын
Thanks! Good answer, as in most all cases, you get what you pay for, but, what did you really want to start with. Figure out where you really want to go before choosing what the path is to get there. Oh, and by the way, how thick is your wallet. :D @@ImpulseAudioSpeakers
@duo315
4 жыл бұрын
The sticker?
@rongrosstube
2 жыл бұрын
Liked and Subscribed. I did not find a follow-up comment of the system you built with these MF drivers?
@ImpulseAudioSpeakers
2 жыл бұрын
Hmm, ya I might not have made a video but I did build a 3 way using a fountek ribbon tweeter and I think a Dayton RS180 woofer. They were pretty sweet speakers, but I only built test enclosures and when my house renovation started I basically disassembled them and moved on.
@edwardcase
3 жыл бұрын
The cost averages 90USD per. Pricey. They should be decent at this price...
@Alawatakima
6 жыл бұрын
Could you give us a top 3 tweeters, and top 3 woofers video any why they are your personal faves? (Might have to make top 3 mid woofer and top 3 low woofer to really get the whole spectrum). Thanks!
@ImpulseAudioSpeakers
6 жыл бұрын
Alawatakima i like that idea actually. I have a build Im working on right (video should be up later this weekend) but I'll try to do something like that.
@Alawatakima
6 жыл бұрын
Impulse Audio Awesome! Love your input on drivers and xovers! The detail is more than I could ask for. Looking forward to the video!
@Rendraco79
5 жыл бұрын
I like very much your videos, well made my friend, very technical reviews, honest and understandable. nice videos. would you make a video about generic speakers, those from china without t/s parameters, and make something great (as usual) for us? from search and purchase, measuring tests and the final build (a 3 way speaker for ex.) i will appreciate that, it will be a VERY, very interesting video. thank you!
@ImpulseAudioSpeakers
5 жыл бұрын
Ren Draco interesting idea. You mean some eBay drivers or alixpress or something ?
@NewClassic2
5 жыл бұрын
Characteristics of the dome? (Thickness. What is drenched?)
@ImpulseAudioSpeakers
5 жыл бұрын
NewClassic sorry I’m not sure I understand the question. If you’re wondering about the sound quality I do have another video of it being used in a 3 way that describes the sound a little more. I don’t think it has a thick or drenched sound but I’m not sure what those words mean in terms of sound quality.
@davejones4740
6 жыл бұрын
What hardware do you need to run the sweep tests.
@ImpulseAudioSpeakers
6 жыл бұрын
Dave Jones you should check out my last video about my shop tour. In that video I talk about hardware and software.
@gino3286
5 жыл бұрын
Hi i have a question about the spectrum at 5:54. Do you mean that this is a very good performance ? do you have experience of midrange cone/dome with an even better performance ? i have the feeling that this is a very important test. I remember the old Infinity Emim drivers having a superb and amazingly clean spectrum. www.cieri.net/Documenti/Cataloghi/Infinity/Infinity%20-%20IRS%20Epsilon%20-%20Depliant.pdf (see on page 9 - they call it waterfall response shot) Could they have been some of the best midrange drivers ever made ? there is almost no ringing to speak of ... I am obsessed with midrange performances because i am looking for the best reproduction possible of human voice.
@geokrilov
3 жыл бұрын
The bad spectrum decay is mostly because of a steel ringing back camera. It could be much better if it had none or if the camera had better design.
@joseiracheta3777
5 жыл бұрын
love your videos. im considering building a pair of speakers using a morel 2 inch dome and 1 inch tweeter that is mounted in a 5 inch round plate. I would like your recommendation for a woofer. I would put it in a 1.5 cubic foot or so sealed box. I would like an 8 ohm system. im thinking a good 7 or 8 inch would work.
@joseiracheta3777
5 жыл бұрын
www.madisoundspeakerstore.com/approx-2-midrange/morel-tm4055-8-tweeter-midrange/ this is the mid tweet combo
@ImpulseAudioSpeakers
5 жыл бұрын
Jose Iracheta is probably go with an 8” to get more bass. What’s the budget?
@joseiracheta3777
5 жыл бұрын
@@ImpulseAudioSpeakers about 150 per woofer and 100 per crossover
@ImpulseAudioSpeakers
5 жыл бұрын
Jose Iracheta I would look at the SB Acoustics woofers. They like sealed boxes and sound excellent.
@JasonLeaman
5 жыл бұрын
Hey nice mid !
@whozaskin3639
5 жыл бұрын
As far as CAR audio, I've simply heard Hertz and CDT wallow all over morel too many times. Morel quality doesn't correlate to morel pricing.
@fearwolfbrewery5014
6 жыл бұрын
How is it going with the 3-way project?
@ImpulseAudioSpeakers
6 жыл бұрын
Fear Wolf Brewery I havent done as much with it as I hoped but I am "done" the morel/fountek version. It sounds great. Need to figure out what I'd like to do next.
@fearwolfbrewery5014
6 жыл бұрын
Ok, so you are going for foundtek and morel? You should not facetting the sides like this to reduce diffraction? www.troelsgravesen.dk/SP44.htm Btw, you cannot do a video about baffle step compensation?
@ImpulseAudioSpeakers
6 жыл бұрын
Fear Wolf Brewery I could facet the sides but didn't feel the need to do that. I still plan to work on the Viawave and Scanspeak version. We'll see... A video about baffle step compensation would be good. Not sure when I can fit it in though.
@headfiunderground8458
4 жыл бұрын
So what a type of mirange driver you lovely moust?
@ImpulseAudioSpeakers
4 жыл бұрын
headmax hmm that’s tough cause I actually haven’t used any mids that I really feel were good. This one was pretty good sound but can’t cross low. Probably the Celestion TF0108 I think it was... can’t recall the exact model name.
@user-zh7eo2ul2v
5 жыл бұрын
Morel medium quality speaker made,but very high price.. Please, testing really high quality speakers - SEAS H1192-08 (CD22RN4X)(Fs 20 Hz, Qts 0.24!!!!) and 2 perfect quality Monacor speakers - sph-170c and sp6/100 pro (4 ohm). This speakers really very high quality!!!👍 Thank you very much!
@ImpulseAudioSpeakers
5 жыл бұрын
Руфат Ширалиев I can’t afford too many high end units. I test them as I need them. If I ever need those units, I’ll do them.
@user-zh7eo2ul2v
5 жыл бұрын
@@ImpulseAudioSpeakers These speakers are not very expensive. Seas costs only $ 118-130, and these two speakers from Monacor cost 80-120 euros for each. It's not expensive for High-End class speakers. Seas has a diameter of 22 centimeters, but its resonance is 20 hz! Qts 0.24!!!!! This is a unique speaker, and not very expensive. It is better than 8 inch Motus 205th. And the high-end Monacor speakers are also great, but inexpensive for their class. Their characteristics are envied even by Scan Speak!PS:There is another great speaker: SB acoustics sb15mfc30-4 its price is only 42 euros!!!
@ImpulseAudioSpeakers
5 жыл бұрын
Руфат Ширалиев pretty expensive paper weights if I don’t have a project for them. And a 20hz Fs is not necessarily good/useful. I pick the driver I need for a project that fulfills a need.
@user-zh7eo2ul2v
5 жыл бұрын
@@ImpulseAudioSpeakers Mr, you are a very talented master who makes speaker systems. I am a programmer and audiophile. And I would really like to help you, so that you know all the best quality models of speakers.I wish you great success!
@Big_Boi23
6 жыл бұрын
How does it sound?
@ImpulseAudioSpeakers
6 жыл бұрын
Kevin Djordjevic pretty darn good. I have a video about it in a 3 way if you would like some more info.
@Big_Boi23
6 жыл бұрын
Found it. I'd really like to hear your thoughts on the Dayton RS52 if you can get your hands on one. Supposedly the MDM55 sounds better, but the Dayton RS52 looks better on paper. Even the Dayton RS75 would be a good trial as well.
@ImpulseAudioSpeakers
6 жыл бұрын
Kevin Djordjevic ya I’ve read the same thing. Not sure what to think because I’ve never heard the RS52. I’d like to try it but don’t have a use for it at the moment.
@WV591
5 жыл бұрын
Morel were good back in the 90's not as impressive these days
@kelvinespinosa1430
6 жыл бұрын
I would like to speak with you for something really important
@ImpulseAudioSpeakers
6 жыл бұрын
Kelvin Espinosa I can be reached privately by email if you would like. ryan at impulseaudio dot ca I check it about once a week because its not my main email, and I try to reply to all emails.
@user-de2vv7tk8j
10 ай бұрын
Looks like a copy of the famous ATC SM75-150 midrange.
@audiumline4615
11 ай бұрын
Brasil🔊👀👍
@corneliusantonius3108
5 жыл бұрын
Looks a bit as old Philips Squakers
@orangeoratory3645
6 жыл бұрын
isnt this a tweeter not a midrange
@ImpulseAudioSpeakers
6 жыл бұрын
Orange Oratory it certainly blurs the line between tweeter and mid. It definitely needs something to handle the stuff above 5khz. But it can't go very low either.
@davidtimmerman3121
3 жыл бұрын
yeah, morel makes some good stuff. sadly, they do it in apartheid israel, so, no go for me. BDS! stop the slaughter!
Пікірлер: 93