Very nice. My trailer came with the JT Strong Arms from Lippert.
@tm8747
3 жыл бұрын
i had the same problem in hitting the jacks in a dip, so i installed a piece of channel in the top , screwed into the rear underside of the trailer, i cut a u - shape in the bottom of channel to slide the scissor jack in , drilled a hole from back to front and installed a pin drop bolt, to hold the jack in place. this way before you leave, you can remove the jacks, without bottoming out again. , if that not for you, then install roller wheel the same height , or higher on the rear of the trailer to get from bottoming out, and damaging the scissor jacks. hope that helps you.
@zeex-14rse57
3 жыл бұрын
We went with Steadyfast stabilizers. Solid as heck. Wife and I get a wee bit of nausea when the camper moves a bit.
@robpivato4227
Жыл бұрын
cool looks like smaert simple design. gotta love that!
@journeywiththedragonclan3125
3 жыл бұрын
You guys are just awesome, thank you for the little details even down to the Bolts... that stuff is so good to know BEFORE you leave the hardware store and head home an hour away, lol! So really, thank you! You ROCK! Those are awesome!!!!! Now I say, (as Leo walks back to the bedroom shaking the whole rv back and forth).....I WANT SOME OF THOSE!!! 😆 Blessing until our path cross. The Dragon Clan 🐉
@RobertSmith-tq6mf
3 жыл бұрын
You need a cordless drill! It would speed things up a lot. Our 5th wheel has JT strong arms on the front. It helps a lot. I also put one of those trapezoid stabilizers on the rear bumper. And use x chocks.
@AE5X
3 жыл бұрын
C'mon you two, there is a funner method of rocking a trailer. Send the kids to the movies for the afternoon... 👌
@NoOrdinaryPath
3 жыл бұрын
Well it does work great when its "windy" 😉
@adrianlucero2880
3 жыл бұрын
The real question is, does it pass the “wind” test!! Lol! 😂
@NoOrdinaryPath
3 жыл бұрын
You betcha 😉🙌
@NursingOurTravelBug
3 жыл бұрын
Wow that is a mega improvement! Nice upgrade.
@Timbo428CJ
3 жыл бұрын
Looks like they work pretty good! 👍👍
@proceedingonwardinamerica
3 жыл бұрын
looks like they worked great. that's great to see.
@Rictoutou
27 күн бұрын
Is this just for the rear or front too in the box ?
@ChanceP
3 жыл бұрын
Looks like with both they are working great... no more motion sickness from riding waves! :)
@rodl12
3 жыл бұрын
There's nothing crazy about the Hillbilly Stabilizers. 2 - 2x4's, 2 Eye hooks and a ratchet strap for under $20 and works great!
@NoOrdinaryPath
3 жыл бұрын
Haha, wasn't calling anyone out. I Gotta say though it seems like a hassle to have to store and set up. But if it's working- power to you!
@shawn1506
Жыл бұрын
No hassel. Easier than cranking down those stabilizers of yours. You looked outta breath.
@lisamcgrath3132
3 жыл бұрын
Another great upgrade!!
@NoOrdinaryPath
3 жыл бұрын
Indeed! 😉
@paulshannon4576
3 жыл бұрын
Nice upgrade. 👍
@shawnlshs
3 жыл бұрын
Pretty impressive
@robertomartinez3750
Ай бұрын
Sorry to bother you but where can I get this Xbraces
@stephaniefitch4713
3 жыл бұрын
Look great 👍
@NoOrdinaryPath
3 жыл бұрын
Thanks!
@Thethriftpicker
3 жыл бұрын
Why you gotta bring up Zion hahaha We have different automatic stabilizers, but we've been trying to find something that works better. This shake got me like.... AHHHHH! lol
@tycho04
3 жыл бұрын
I know you commented you had to switch out bolts due to size of the current bolts in the stabilizers. But did you have to go with a shorter bolt as well in lower mounts? Have a 2017 Keystone Passport 2920BHWE and installing the XBrace. Ran into similar problems with the hole sizes to small but instead of buying smaller size bolts, I drilled it out. But now noticing the lower mount bolt with spacer is too long and has some sliding play in it. Says tighten until no slack but I run out of threads before that can happen. Thinking I need to swap from the 4 1/2 inch down to maybe a 4 inch long bolt.
@NoOrdinaryPath
3 жыл бұрын
Yeah, I would either get a fully threaded bolt or just go with a shorter one. Hope you like them, just remember to always loosen before attempting to lift the jacks up. We really notice a difference with ours extended now!
@Shane-bx8ws
3 жыл бұрын
Just got my stabilizer jacks..... my axles are too close together 😢
@Bwanar1
3 жыл бұрын
Nice...been waiting for that and the results. Do you have to tighten and loosen the braces every time you put the jacks up and down; or can you just put them up and down already adjusted? Also, do they fit on electric jacks similarly? Thanks in Advance.
@NoOrdinaryPath
3 жыл бұрын
You have to tighten and loosen each time. Not hard to do though and as one viewer pointed out, having a cordless drill would make it go much faster. Not sure if they would work on the electric jacks. I suggest calling MORryde and talking to their customer service to make sure.
@Indiansmoke1
3 жыл бұрын
Have 5k lb jacks on my trailer with 4 bolts in each jack. Does not move now.
@randycessna4403
2 жыл бұрын
They don't look any better than what comes on these Cracker boxes new.Do they make any using airbag concept?
@NoOrdinaryPath
2 жыл бұрын
Not sure about the airbags. This really did make a difference for us.
@timf6916
3 жыл бұрын
You are TOO FUNNY, Harbor freight. NO, NO,NO. It also help if your jacks are not so extended. My 2 Daughters are nurses, and I tell them, cheap is not always the best way to go. They have a old saying, pay me now or pay me later. Your wife is just a CUTIE.
@NoOrdinaryPath
3 жыл бұрын
We agree. We went with them because of the warranty. The last time we replaced was it was paid for. 😁
@yousseflahbil679
2 жыл бұрын
I lose the tread in one side
@NoOrdinaryPath
2 жыл бұрын
That's what we are dealing with right now
@Leomedic74
3 жыл бұрын
Hey guys I don't know why but my wife has commented from our Journey With The Dragon Clan channel yet it will not show up for some reason. Are you guys seeing it?
@NoOrdinaryPath
3 жыл бұрын
Hey Leo, I see your Backtotheearth comment. Is that what you're referring to?
@Leomedic74
3 жыл бұрын
@@NoOrdinaryPath NO it's a comment from Journey with The Dragon Clan. I was able to get a picture and Facebook message you so you can see what I mean. I'm not sure what's going on so I thought we'd check
@NoOrdinaryPath
3 жыл бұрын
Yeah, we don't see it but I'll look into it.
@backtotheearthnaturalhomes3120
3 жыл бұрын
You guys are just awesome, thank you for the little details even down to the Bolts... that stuff is so good to know BEFORE you leave the hardware store and head home an hour away, lol! So really, thank you! You ROCK! Those are awesome!!!!! Now I say, (as Leo walks back to the bedroom shaking the whole rv back and forth).....I WANT SOME OF THOSE!!! 😆 Blessings until our paths cross! The Dragon Clan 🐉
@NoOrdinaryPath
3 жыл бұрын
Haha! Yes. They have really cut down on that heavy footed rocking. 😁
Пікірлер: 46