am in Cape Town and have installed a wellpoint and am watering my entire property with ten of these beauties All At Once which everyone told me was impossible. I tried multiple different heads which took too much water so my system could nit build up sufficient back pressure. With the Hunters installed they all run at once. Thank You Hunter !
@wrathchild11
11 жыл бұрын
completed a large irrigation job in 2011...forced to use rainbird's version.....a good part of the project was rotators...what a night-mare...550 heads...cleaning them out, replacing nozzles...just completed a large house install today...used hunter's version....toally impressed...25yrs in the business....sold me....BTW...they are being used with rainbird's 1800 series heads...IMHO...still the best...but hunter is a damn close second.
@texaslawnmonster3413
8 жыл бұрын
Im a licensed irrigator here in texas, we used MP Rotators 80% of the time, very versatile.
@MechInvent
7 жыл бұрын
Well I’m sold. Glad I put the rain birds back on the shelf today!
@vonpoppa
13 жыл бұрын
MP Rotators are a great water conservation device and take proper irrigation knowledge to set-up. You should have pressure regulation at 40psi and you should lengthen your run time which still saves water as the video states. The MP put down water slower and you need to adjust your Timer (controller) and ensure proper pressure regulation. Water Conservation is everyone's job and take proper knowledge, not just replace head and guess work.
@howlenconan
13 жыл бұрын
I replaced 60 spray heads with these and my customers water bill went from $488.00 Sept 2010 to $127 this last Sept. Installed correctly they do save water.
@adamneusbaum3749
2 жыл бұрын
Have they had to replace the lawn?
@e.a.p3174
3 жыл бұрын
They are a great product. I have installed them exclusively for areas up to 30 feet.
@Hunter_Landscape_Irrigation
3 жыл бұрын
Awesome! thanks for watching!
@petercondiles5650
8 жыл бұрын
Should I use 12" heads or 4"; I have a slope on 2 adjacent sides: 1 side by driveway rises about 12" over about 3-4feet (26' long), the adjacent side by sidewalk rises about 20" over about 5-6feet (18' long). Thx!
@Vargadumi
8 жыл бұрын
Can someone tell me the name of the song please? My son loves these sprinkler videos and he dances to this like crazy with a big smile on his face🤗 shazam didn't work...
@sprinklerbuddy
13 жыл бұрын
@Bazzaland Yes they are better than concrete doughnuts. They do withstand the string trimmers and they won't sink and disappear like the doughnuts. Sprinkler Buddy keeps your sprinkler heads visible with a lot less maintenance long term by preventing grass from growing between the indicator and sprinkler head shaft via the custom fit design.
@louischarlesbedy6019
2 жыл бұрын
Where can see these rotary sprinkler systems. I am interested in possibly changing my sprinklers.
@Hunter_Landscape_Irrigation
2 жыл бұрын
Check out our website for more information: www.hunterindustries.com/benefits-hunter-automatic-sprinkler-system
@louischarlesbedy6019
2 жыл бұрын
Thanks!
@WebbedPete
4 жыл бұрын
Hunter documents say the MP Rotator filter can be removed for cleaning. Can you point to instructions and/or video on how to remove and reinstall the filter on an MP Rotator?
@tonynorman5599
4 жыл бұрын
A couple of my spray heads are not rotating fast enough or not moving at all. How can I fix please
@Denverwaterheaters
10 жыл бұрын
the best nozzle in the market !
@f5tornadogray
3 жыл бұрын
i know right
@artemlipatkin
14 жыл бұрын
Тенденция использовать вращающиеся форсунки растет. Во многих случаях в проектах со сложной структурой предпочтение отдают именно этим форсункам.
@donhgr
4 жыл бұрын
Just installed them in my rain bird 30 year old system. All work perfect except last head in zone ( can’t turn down enough) is that because pressure is to high and if so can that be resolved by installing a pressure reg body in that spot or will my problem just move to a different head
@The09creeper
3 жыл бұрын
You would use a pressure regulated head
@ChicagoSirens
11 жыл бұрын
When I went to the store, I saw this nozzle that looked EXACTLY like a MP Rotator. But upon further inspection, I saw that it said Orbit Eco-Stream? Did Orbit steal your nozzle or Hunter and Orbit are partners. I also noticed that Orbits VAN nozzle looks like Hunters PRO Nozzle. Please reply.
@ZeeThreeToo
6 жыл бұрын
I am missing something. I like the looks of the spray pattern. I went to a county irrigation class and they recommend these. However, if my lawn requires an inch of water every week, the MP's deliver .04 GPM so I must run my system on this zone for 2.5 hours instead of an hour. What am I missing?
@JEK
3 жыл бұрын
14-15 min.
@MikeMyersTTV
3 жыл бұрын
Run each zone with MP's 90 min average
@lukazupie7220
Жыл бұрын
Slower watering is more effective
@inspektor.
3 жыл бұрын
Hello, can the MP800SR (90° to 210°) and MP1000 (90° to 210°) watering nozzles be adjust to a minimum working angle of 70 degrees? Thank you!
@DriveLaken
3 жыл бұрын
@@Hunter_Landscape_Irrigation how is that a good question when he states the minimum and maximum arc IN HIS QUESTION 🤣
@920rookie
8 жыл бұрын
I like the look of these, nice design. I'm chasing a 'rotating finger' long stroke adjustable pop-up, for a coastal residential property with calcium and sand issues. Many of my contaminants pass the usual filter, and clog traditional nozzles. I'm a little concerned my 'corridor/strip' sprays only need around 2m throw, but the smaller throw might get blocked more than the long throw ones. Do you have an email address I can send my plans to for recommendations? I'm in Western Australia.
@920rookie
8 жыл бұрын
Thanks Hunter team, I'm sketching up my yard, bore and stuff now, will drop the tech team a note soon, much appreciated.
@Bazzaland
13 жыл бұрын
@TheKellybella Yes they will - or you can use a Hunter brand spray body.
@jaydee3046
2 жыл бұрын
I would like to know about the range numbers: If one is rated at "8 to 15", does that mean I cannot adjust the radius to be less than 8 feet?
@brandonvierra8177
2 жыл бұрын
Yea from what I gather. You don’t want to go lower then the minimum radius listed
@Hunter_Landscape_Irrigation
2 жыл бұрын
Thank you for contacting Hunter Technical Support. The distance of coverage for the MP Rotator nozzle is dependent upon the incoming pressure. If you are not able to adjust the radius down to the low end of the range, then the incoming pressure may be too high for the minimum desired radius. Use the Pro-Spray PRS30 (PROS-PRS30) to maintain 30 psi at the MP Rotator nozzle for minimal radius options. If you have a MP rotator rated for 8 to 15 feet you will not be able to adjust the radius to be less than 8 feet. If you would like to adjust below 8 feet you will need the MP800SR. These MP Rotators have a radius of 6 to 12 feet.
@f5tornadogray
3 жыл бұрын
hunter is the best!!!
@Hunter_Landscape_Irrigation
3 жыл бұрын
Thanks for choosing Hunter!
@angeloapruebo1292
6 жыл бұрын
Is there a supply here in the Philippines
@sjmarsing6738
7 жыл бұрын
I have MP 3000 and I have dry spots close to the head about 4 feet out should I downsize to MP2000?
@maximilianbecker4023
6 жыл бұрын
Hunter Irrigation You are advertising the range can be changed by 25% just by changing the skrew. Changing the range by replacing the PRS is not a feature. You don't get below 7.5 meters with a MP3000-90 and PRS-40. Range of the MP2000 on the other side is to low for my needs. I need 6.9 meters.
@ShyRage1
9 жыл бұрын
does it water in the middle
@jzizzles7799
6 жыл бұрын
My lawn turns brown after switching to these. I went from 5 minutes run time on the old nozzle to 20 mins on the MP-1000. Still brown!
@jzizzles7799
6 жыл бұрын
I think the water droplets needs to be larger.
@BonnerBB
5 ай бұрын
Because you said "still brown" I assume it was brown running 5 minutes on the old nozzles. 5 minutes was giving you brown grass then 20 minutes on the MPR rotator is no different. .40 vs 1.60 precipitation rate. All you did was slow down the application rate still need to increase your run time no matter which nozzle you use. Shoot for a half inch of water in one or two applications a week.
@virtualacademy958
7 жыл бұрын
I had two estimates for an irrigation system. One told me I would need 9 zones. The other one told me that he used these nozzles and I would only need 5 because of their efficiency, etc. He was half the cost of the price from the first contractor. Does this sound right?
@MC-cp1hg
7 жыл бұрын
Do they come in the 3/4 end to screw onto my existing pipes? If so can you send me a link where I can order.
@MC-cp1hg
7 жыл бұрын
??? Don't understand your answer. I was just wondering can I buy the sprinkler and then screw it into the ground. The pipe in the ground that a 3/4 thread. Would need a female thread that can screw into it. Do you have it like that?
@DylBuilder1
2 жыл бұрын
@@MC-cp1hg The mprotator is just a sprinkler nozzle. You would buy the 4 inch pro spray spray body that is 1/2 then use an adapter from 1/2 to 3/4. Then screw on the map rotator. All the np rotators and pro sprays can be found at Home Depot or lowes.
@Bazzaland
13 жыл бұрын
@sprinklerbuddy Are these better than concrete doughnuts? Can they withstand string trimmers applications which are needed to trim creeping turf varieties?
@MrRichardc
11 жыл бұрын
lot of mine wont turn or don't get to full radius until sometime into the arc therefor i have to over spray the sidewalk. The 3000 are the only ones to actually throw somewhat like they are suppose to. The 1000 are just junk
@rowrow5387
12 жыл бұрын
Can we adjust arc to less than 90 degrees?
@vonpoppa
6 жыл бұрын
Yes they sell MP Corner that adjust from 105 to 45 degrees.
@هانىثابت-ش2ز
2 жыл бұрын
عندي نوزل 360° MP 500 لاكن لا يصل إلى 9 متر ما العمل
@Hunter_Landscape_Irrigation
2 жыл бұрын
Thank you for contacting Hunter Technical Support. The distance of coverage for the MP Rotator nozzle is dependent upon the incoming pressure. If you are not getting the distance you require, your incoming pressure may be too low to achieve the desired distance of coverage. Check if your valve has a flow control handle. If so, you may be able to increase the flow from the valve. Open the irrigation valve flow control handle by turning the handle in the counterclockwise position. If the valve flow control is fully open and you still are not getting the distance you require, the flow for that zone is too high (too many heads) or a possible break in the piping causing a reduction in pressure. If you are not able to adjust the radius down to the low end of the range, then the incoming pressure may be too high for the minimum desired radius. Use the Pro-Spray PRS30 (PROS-PRS30) to maintain 30 psi at the MP Rotator nozzle for minimal radius options.
@f5tornadogray
3 жыл бұрын
best nozzle
@Hunter_Landscape_Irrigation
3 жыл бұрын
Thanks for choosing Hunter!
@tomcervenka7404
3 жыл бұрын
@@Hunter_Landscape_Irrigation I asked my sprinkler guy to shut of one of these heads and I'm trying to turn it back on. Can you let me know what to do? I would appreciate it.
@TheKellybella
13 жыл бұрын
will these nozzles fit a rainbird 1800 sprikler?
@miguellopez8994
4 жыл бұрын
Yes
@chriscowally
12 жыл бұрын
okay just need that key
@David-if9yc
6 жыл бұрын
yea, why wouldn't the head come with the key!?
@rockleone1117
9 жыл бұрын
Well drip line watering is only for container plants or vegetable gardens... Drip line watering is not for big fields... Duh...
@everythinghomerepair1747
8 жыл бұрын
Not true you can use it under a big lawn and it is often done.
@growcontrollandscape
7 жыл бұрын
I'm an irrigation designer as I use about 90% drip on all of my irrigation plans. Sometimes even turf areas where it makes sense. Of course, if I have a larger field where I can use rotors or something similar, I would use that but that doesn't mean you can't install drip in those open fields.
@sprinklerbuddy
13 жыл бұрын
Protect your Hunter rotors and spray heads with the "Sprinkler Buddy"
@MrRichardc
11 жыл бұрын
all fun and games until you get water restrictions and have to only water on certain times and days
Пікірлер: 69